Professional Documents
Culture Documents
Educational and Educational Materials
Educational and Educational Materials
• Chicago, IL 60651-3224
Ph: 773-261-2182 • Fax: 773-261-2867 • Sales@jwdonchin.com • www.jwdonchin,com
Page Description
641 VOCATIONAL AND EDUCATIONAL MATERIAL
642 Videos
Outside Micrometer No. 1716
Combination Square No. 1722
Combination Set No. 1719
Vernier Height Gage No. 1731
Vernier Caliper No. 1728
Bevel Protractor No. 1725
Complete Tool Training Series No. 1732
643 Tools & Rules for Precision Measuring No. 1734
Tools & Rules for Precision Measuring
The Starrett Book for Student Machinists No. 1700
The Starrett Story No. 1216 EDP 56601
644 Training Aid Kit No. 1701
Educational Charts Set of 18
Wall Size No. 1702 18 5/8 x 14 5/8 (473 x 371mm)
Three-Ring Notebook Size No. 1715 11 x 8 1/2 (280 x 216mm)
645 Inch/Metric Tap Drill Sizes and Decimal Equivalents Card
Millimeter/Inch Equivalents Card
Wall Chart No. 1214 EDP 56605
Tool Sets No. S904Z
VOCATIONAL AND
EDUCATIONAL MATERIAL
◆ Videos
◆ Training Aid Kit
◆ Publications
◆ Charts
◆ Reference Cards
VOCATIONAL AND
EDUCATIONAL MATERIAL
Videos
Starrett training videos are ideal for
individuals or training classes. Six videos
take students through extensive step-by-
step use and care of precision measuring
tools and include hands-on demonstrations.
Available individually, or as one video with
all six tapes combined.
◆ VHS format
◆ 12 1/2 minutes running time
Outside Micrometer
No. 1716
This presentation shows and demonstrates
the principle parts, zero setting and
tensioning, holding, cleaning of measuring
faces, opening rapidly, developing “feel,”
using screw thread to obtain linear
measurements, decimal equivalents,
reading to .001⬙ and .0001⬙, and correct
handling and storage of the outside
micrometer. Vernier Caliper fixture, vise on milling machine and shaft in
dividing head, and checking work
No. 1728
Combination Square dimensions after machining.
◆ Outside Measurements
No. 1722 ◆ Inside Measurements Complete Tool
This presentation demonstrates the setting This demonstration shows how to hold Training Series
of readings on blade, scribing lines, cross and use a caliper with 50-division vernier
lines, 45º angles on work, transferring plate, how to adjust slide, make fine No. 1732
measurements, locating hole centers, using adjustments and lock slide in final position,
as height gage, setting up work on angle setting the caliper to various readings, One complete Tool Training Series. All six
iron, checking alignment of assembled part, measuring actual workpiece inside and individual tool videos have been combined
locating work in drill press vise, lining up outside diameters, slot widths and on a single tape.
milling machine vise and inspecting overall dimensions. ◆ Outside Micrometer
machined part to shop drawing. ◆ Combination Set
Combination Set Bevel Protractor ◆ Combination Square
No. 1725 ◆ Bevel Protractor
No. 1719 ◆ Vernier Caliper
This presentation shows and demonstrates
This video illustrates how to set and use ◆ Vernier Height Gage
the principal parts, assembling square head
scale of degrees, setting acute and obtuse ◆ VHS format
to blade, reversibility of square head on
angles, measuring an unknown angle, ◆ 78 minutes running time
laying out angles, transferring angles from
blade, 90º and 45º angles, spirit level, built- drawing to work, setting work at vertical
in scriber, blade graduations, reversible angle, using spirit level, setting work on
lock bolt, assembling center head to blade,
finding center of round stock, assembling
protractor head to blade, reading angles Description Catalog No. EDP No.
and locking turret.
Video, Outside Micrometer 1716 55897
Vernier Height Gage Video, Combination Set 1719 56093
No. 1731 Video, Combination Square 1722 56095
This presentation defines the main parts of Video, Bevel Protractor 1725 56097
the vernier height gage and vernier Video, Vernier Caliper 1728 56340
principle, how to read in the English and
metric systems, layout and inspection Video, Vernier Height Gage 1731 56438
procedures plus tests on readings in inches Video, Tool Training Series on One Tape 1732 64435
and millimeters.
NOTE: Videos are priced items.
642
VOCATIONAL AND
EDUCATIONAL MATERIAL
Tools & Rules for measuring tools; dial indicators; layout with
Precision Measuring accuracy; measuring lathe work; measuring
screw threads; facts about fit; limits of
A valuable aid for every training program, tolerance; introduction to electronic tools;
this comprehensive, illustrated booklet tells new precision measuring tools; and also
the story of precision measurements in a includes eight pages of helpful reference
simple, down-to-earth way that appeals to data – decimal equivalents, squares, cubes,
all levels of students. The booklet contains square and cube roots, tap drill and screw
information on: linear measuring standards; thread information. A valuable aid for every
measuring and transferring measurements; training program. Size 5 1/4 x 7 5/8
steel rules; calipers and dividers; how to (133 x 200mm) 73 pages with over
read vernier tools and the micrometer; types 150 illustrations.
of micrometers; gage blocks and digital
643
VOCATIONAL AND
EDUCATIONAL MATERIAL
Educational Charts
Set of 18
Wall Size
No. 1702 18 5/8 x 14 5/8
(473 x 371mm)
Three-Ring
Notebook Size
No. 1715 11 x 8 1/2
(280 x 216mm)
644
VOCATIONAL AND
EDUCATIONAL MATERIAL
Inch/Metric Tap Drill number size drills (1-80); drill sizes for
standard taps from #0-80 to 1 1/2-12
Sizes and Decimal (approximately 65% thread); and pipe
Equivalents Card taps from 1/8-27 to 4-8. Metric tap/drill
sizes section. Printed on two sides in
Card shows decimal equivalents of 8ths, red and black. Pocket size 3 x 5
16ths, 32nds and 64ths of an inch; decimal (75 x 125mm).
equivalents of letter size drills (A-Z) and
Note: Charts are available for a nominal fee. No. S904Z Apprentice Tool Set.
645
J.W. DONCHIN CO. www.jwdonchin.com
J.W. Donchin Co. was established in 1924 and has been known world wide ever since. Customer Service is our Main Focus. We offer
Expert Product Knowledge, Large Stocking Inventory and Competitive Pricing to assist you in locating and selecting the correct
tool or product to fit your needs. (J.W. Donchin Co. is one of L.S. Starrett’s largest stocking distributors.)
Contact Information:
Phone: 773-261-2182
Fax: 773-261-2867
Email: sales@jwdonchin.com
• Website:
• Quotes:
• Latest Promos:
• Starrett
• Mitutoyo
• Fowler