Professional Documents
Culture Documents
Relief Valve (Rear Brake Oil Cooler) - Test and Adjust: Pruebas y Ajustes
Relief Valve (Rear Brake Oil Cooler) - Test and Adjust: Pruebas y Ajustes
Bienvenido: cr080x0006886x02
Producto: NO SE HA ESCOGIDO NINGUN EQUIPO
Modelo: NO SE HA ESCOGIDO NINGUN EQUIPO
Configuración: NO SE HA ESCOGIDO NINGUN EQUIPO
Pruebas y Ajustes
784C, 785C and 785C HAA Off-Highway Truck/Tractors Hydraulic System
Número de medio -SENR1498-03 Fecha de publicación -01/09/2004 Fecha de actualización -21/09/2004
i00987601
Illustration 1 g00502953
Location of test port for the rear brake oil cooler relief valve
1. Remove the plug from the test port. Install a 2P-8421 O-Ring Adapter into the test port.
2. Install a 6V-3965 Nipple Assembly to the adapter. Connect a hose to the nipple.
3. Install an 8T-0854 Pressure Gauge (0 to 1000 kPa (0 to 145 psi)) to the hose.
4. Move the hoist control lever to the HOLD position and start the engine.
5. Look at the pressure gauge. The maximum pressure reading should be 790 ± 20 kPa (115 ± 3
psi).
Illustration 2 g00283757
Rear brake oil cooler relief valve
6. As needed, adjust the number of shims (5) in order to achieve the correct relief valve
pressure setting. Do not adjust shims (6).
Table 1
Shims for Adjusting the Relief Valve Pressure Setting
8B-4624
0.81 mm (0.032 inch) 30 kPa (4 psi)