Download as pdf or txt
Download as pdf or txt
You are on page 1of 3

DC2250 Isolated DC-DC Converter

Description
Type Table
DC2250 series isolated DC/DC converter applies advanced
Type Battery Voltage Output Voltage Output current
technology and is configured specifically for electric vehicles. It
ipDCIS-3612 36V 12V 50A
is very suitable to supply power to the lamp and audio system as
ipDCIS-4812 48V 12V 50A
it is very stable and clean. The advantages of high efficiency,
ipDCIS-6012 60V 12V 50A
stability and compact size, are achieved by adopting the
ipDCIS-7212 72V 12V 50A
advanced high frequency technology. It is sealed by silica glue to
ipDCIS-14412 144V 12V 50A
get water and vibration proof, which ensures the stability of the
vehicle in atrocious condition. ipDCIS-22012 220V 12V 50A

It also can be used as a charger to charge the 12V battery in


the electric automobile according to the customer’s requirement.
Current equalizer is built in, which makes converters work in
parallel in order to enlarge the capability.

Specifications
Input Voltage: 36V 48V 60V 72V 144V 220V
Output Voltage: (Can be used to charge battery 12V)
Max Output Current: 50A
Ripple factor: <1%
Maximum Efficiency: >88%
Environmental Enclosure: IP66 Type Description
Shock and Vibration: SAEJ1378
Operating Temperature: -20℃-50℃ ipDCIS - 7212 - 30
Output curret: 30 mean 30 Amp
Protections Output Voltage: 12 mean 12V
Input Voltage: 72 mean 72VDC
Water and Vibration Proofed: All sealed by silica glue to get water and
Basic Type: IS mean Isolated
vibration proof, which is suitable for
all kinds of condition.
Input reverse polarity protection: Shut down, auto–reset. Wire
Water Proofed Fuse: Input or output fuse, simple wiring.
Yellow:Input +(1.5mm2) Red:Output +(4.0mm2)
No Arc: Input with no arc, can be controlled by key switch directly,
Black:Input- (1.5mm2) Black:Output -(4.0mm2)
without contactor
Green: key switch(0.5mm2)
Short Circuit: Shut down with little pulse current, auto–reset, ensure the
wire safety.
Overheating Cutback: Reduce output current if the temperature is over
65℃, ensure the continuous power for your car.
Input Reverse Polarity: Electronic protection, auto–reset.
Input Low Protection: Shut down, auto–reset, prevent the battery from over
discharging
Installation Size

Appendix

Fig1. The wiring diagram of isolated DC/DC converter with control wire

YELLOW 1.5mm2:INPUT+
FUSE

GREEN 0.5mm2:CONTROL
KEY SWITCH

ISOLATED
DC/DC CONVERTER BLACK 1.5mm2:INPUT-

RED 4mm2:OUTPUT12V+

BLACK 4mm2:OUTPUT12V-
Output Characteristic Curve

You might also like