Professional Documents
Culture Documents
Name: Rosas, Loruel - Subject and Section: NEC - 3108
Name: Rosas, Loruel - Subject and Section: NEC - 3108
-7.95dBuV
PROBLEM 2
A microwave transmitter typically requires a +8 dBm audio level to drive the input fully. If a +10dBm level is
measured, what is the actual voltage level measured? Assume a 600 system.
PROBLEM 3
If an impedance matched amplifier has a power gain (Pout/Pin) of 15, What is the value of the voltage gain
(Vout/Vin)?
3.87
PROBLEM 4
Convert the following powers to their dBm equivalent
(a). p = 1 W
(b). p = 0.001 W
(c). p = 0.0001 W
(d). p = 25 W
a = 10xlog10(1000x1) = 30 dBm
b = 10xlog10(1000x0.001) 0 dBm
c = 10xlog10(1000x0.0001) -10 dBm
d = 10xlog10(1000x25 W) 14 dBm
1
PROBLEM 5
The output power for an audio amplifier is specified to be 38 dBm. Convert this value to (a) watts, (b). dBW
A = 1Wx10^(P(dBm/10)/1000 = -6.309 W
PROBLEM 6.
A 600 microphone outputs a -70 dBm level. Calculate the equivalent output voltage for the -70 dBm level.
.245 mV
PROBLEM 7
Convert 50 V to a dBV equivalent.
34 dBuV
PROBLEM 8
A 2.15 Vrms signal Is measured across a 600 load. Convert this measured value to its dBm equivalent.
8.86 dBm
PROBLEM 9
A 2.15 Vrms signal Is measured across a 50 load. Convert this measured value to its dBm equivalent.
19.66 dBm