Professional Documents
Culture Documents
HP Blade Enclosure
HP Blade Enclosure
HP Blade Enclosure
Interconnect
Server blade signal
bay
On-blade
LAN switch or Pass-thru LAN switch or Pass-thru 1 and 2 NIC 1 /2
SAN, LAN, VC, IB or Pass-thru SAN, LAN, VC, IB or Pass-thru NIC 3 /4 (full-height blade only)
5 and 6 Mezzanine 2
7 and 8 Mezzanine 3
(full-height blade only)
…
16 Blades deployment: Server 3
• 2 Pass-thru Modules
FC SAN
…
• 64 SFPs
• 32 ext Switch Ports Server 16
Any Fabric
• 32 FC Cables SAN Switch
…
N-Ports
F-Ports
Server 3
Brocade
16 Blades deployment: Brocade Brocade
…
• 4 - 32 SFPs Server 16
• 2 - 16 ext Switch Ports
• 2 - 16 FC Cables
N-Ports F-Ports E-Ports E-Ports
2 ports of SAN
Path-Thru -- -- Path-Thru Module 562$ -- --
…
Server 3
Any NPIV
16 Blades deployment: Brocade capable SAN Fabric
…
…
• 4 - 32 SFPs Server 16
• 2 - 16 ext Switch Ports
• 2 - 16 FC Cables
N-Ports F-Ports N-Ports F-Ports
• Starting with FOS 5.2.1 the Brocade blades switch can be configured as Access Gateway.
• By using ANSI T11 standard NPIV the switch will act as a N-Port multiplexer, not merge into
the fabric and thus not consume a domain ID.
• Trunking is supported if the external SAN is Brocade
…
Server 3
16 Blades deployment: Any NPIV FC SAN
…
HP VC-FC capable
• 2 VC Modules Module Fabric
SAN Switch
…
• 4 - 16 SFPs Server 16
• 2 - 8 ext Switch Ports
• 2 - 8 FC Cables
N-Ports F-Ports NPIV- F-Ports
Ports
• By using ANSI T11 standard NPIV the virtual connect will act as a N-Port multiplexer, not
merge into the fabric and thus not consume a domain ID.
• 1, 2 or 4 port per VC module enabled
• Can be used wit any switch brand
• Trunking or channeling is not possible to any SAN switch, static path from HBA to uplink.
Additional options:
• AE379A – 4Gb Short Wave SFP, 500m (4 pack)
• AE494A – 4Gb Medium Range SFP, up to 4km
• AE380A – 4Gb Long Wave SFP, up to 10km
…
16 Blades deployment: Server 3
• 2 Pass-thru Modules
FC SAN
…
• 64 SFPs
• 32 ext Switch Ports Server 16
Any Fabric
• 32 FC Cables SAN Switch
…
N-Ports
F-Ports
Server 3
Cisco
16 Blades deployment: Cisco Cisco
…
• 4 - 32 SFPs Server 16
• 2 - 16 ext Switch Ports
• 2 - 16 FC Cables
N-Ports F-Ports E-Ports E-Ports
2 ports of SAN
Path-Thru -- -- Path-Thru Module 562$ -- --
• Each port group of 4 ports has Port # 9124e port 9124 port Port # 9124e port 9124 port
64 buffers Port Group 1 Port Group 4
• By default, each port is given 16 fc1/1 External 8 1 fc1/13 Bay 12 13
buffers fc1/2 Bay 6 2 fc1/14 External 2 14
fc1/3 Bay 13 3 fc1/15 Bay 2 15
• User can allocate more buffers to
fc1/4 Bay 5 4 fc1/16 Bay 1 16
some ports
Port Group 2 Port Group 5
• Maximum a single port can get
fc1/5 External 7 5 fc1/17 Bay 10 17
is 61
fc1/6 Bay 14 6 fc1/18 External 3 18
• Other ports need to be out-of-
fc1/7 Bay 15 7 fc1/19 Bay 9 19
service
fc1/8 Bay 7 8 fc1/20 External 4 20
• No additional license needed
Port Group 3 Port Group 6
• Max distances with 61 buffers fc1/9 Bay 4 9 fc1/21 Bay 16 21
• 30km @4Gbps fc1/10 External 1 10 fc1/22 Bay 8 22
• 60km @2Gbps fc1/11 Bay 3 11 fc1/23 External 6 23