This document is a self-assessment guide for the unit of competency "Perform basic masonry works" under the Masonry NC I qualification. It contains a list of tasks related to masonry work and asks the candidate to indicate with a check mark whether they believe they can perform each task. These tasks include using personal protective equipment, checking tools and materials, mixing and supplying mortar and concrete, laying blocks according to requirements, and cleaning up worksites. Upon completing the self-assessment, the candidate signs to acknowledge the results will only be used for professional development.
This document is a self-assessment guide for the unit of competency "Perform basic masonry works" under the Masonry NC I qualification. It contains a list of tasks related to masonry work and asks the candidate to indicate with a check mark whether they believe they can perform each task. These tasks include using personal protective equipment, checking tools and materials, mixing and supplying mortar and concrete, laying blocks according to requirements, and cleaning up worksites. Upon completing the self-assessment, the candidate signs to acknowledge the results will only be used for professional development.
This document is a self-assessment guide for the unit of competency "Perform basic masonry works" under the Masonry NC I qualification. It contains a list of tasks related to masonry work and asks the candidate to indicate with a check mark whether they believe they can perform each task. These tasks include using personal protective equipment, checking tools and materials, mixing and supplying mortar and concrete, laying blocks according to requirements, and cleaning up worksites. Upon completing the self-assessment, the candidate signs to acknowledge the results will only be used for professional development.
Competency Prepare masonry tools and equipment covered: Perform basic masonry works Instruction: Read each of the questions in the left-hand column of the chart. Place a tick in the appropriate box opposite each question to indicate your answer.
Can I? YES NO
Use personal protective equipment (PPE) in accordance with
Rule 1080 of Occupational Safety and Health Standards
Check masonry tools and equipment based on job requirements
Determine quantity and quality of masonry materials to be
hauled in accordance with work schedule Check serviceability of appropriate hauling/transporting tools and equipment as per job requirements * Haul materials based on designated location quality, quantity and work schedule as instructed Transfer tools and equipment based on quantity and work schedule as specified Identify, measure, cut and bend steel bars according to instruction*
Bundle cut and bent steel bars according to size and shape
Tag fabricated reinforcing steel bar (RSB) according to cutting
list
Mix mortar according to the instructions *
Supply mixed mortar to the appropriate personnel based on job
requirements
Mix concrete according to the requirements *
CONMAS118-0719 ver. 1.00
1 Masonry NC I Supply mixed mortar to the appropriate personnel based on job requirements
Spread mortar on the base of blocks according to requirements*
Position/lay blocks according to requirements *
Check block plumbness/alignment periodically during block
laying Recover and stockpile excess/unused materials according to company rules and procedures * Clean work area according to safety and environmental regulations I agree to undertake assessment in the knowledge that information gathered will only be used for professional development purposes and can only be accessed by concerned assessment personnel and my manager/supervisor.
Collins Cambridge International AS A Level - Cambridge International AS A Level Mathematics Pure Mathematics 1 Student's Book by Helen Ball, Chris Pearce (Solution Manual - Ex 1.1A)