Professional Documents
Culture Documents
Standard Antenna Datasheet - Cresis
Standard Antenna Datasheet - Cresis
3-D Patterns
Available at
www.ets-lindgren.com/3117
FEATURES:
n Ultra Broadband: 1 GHz - 18 GHz
n Low VSWR
The Model 3117 Double Ridged The electrical characteristics of this range. This characteristic is
Waveguide is a the latest addition antenna were designed and modeled essential for even distribution of
to a family of double ridge using powerful workstations electromagnetic energy on a target
waveguides for microwave and running electromagnetic simulation surface, and accurate measurement
EMC measurement from software. Equally important, of gain and vector information.
ETS-Lindgren. This model experienced RF engineers worked The Model 3117’s unique design
corrects the lower gain at the with our manufacturing team to suppresses the propagation of
upper end of the frequency produce a practical and affordable high order modes. The result is
range, commonly found in ridged realization of the modeling an antenna with a well-defined
waveguide antennas. Users of process. All production units are single lobe radiation pattern that
this antenna benefit from uniform individually calibrated at our A2LA outperforms other antennas in its
illumination of target surfaces and accredited lab. class.
accurate gain measurement. In
addition, the Model 3117 exhibits FEATURES
high gain and low VSWR across Single Lobe Radiation Pattern Ultra Broadband
its operational frequency band, The Model 3117 maintains a single The Model 3117 sweeps from
accepting moderate power input of main lobe pattern in the direction 1 GHz to 18 GHz without stopping
300 watts. of the horn axis over its frequency for band breaks, making it ideal
www.ets-lindgren.com
EMC Antennas
Double-Ridged
Waveguide Horn
Model 3117
for automated testing. It has the Uniform Gain, Low VSWR STANDARD CONFIGURATION
widest usable frequency range of The Model 3117 has a more n Antenna Assembly
any antenna in its class, with no uniform gain and antenna factor
performance degradation from high because of the better behavior of n Mounting bracket drilled to
order modes. its radiation pattern. Since the accept ETS-Lindgren or
other tripod mounts with 1/4 in
pattern is stable over frequency, x 20 threads
Power Input the gain and the AF also remain
The Model 3117 uses a Type N stable. Similar antennas of this n Rear “stinger” Mount
connector and accepts up to class exhibit large variations of the
300 watts of continuing input gain and the AF as the frequency n Individually calibrated at 1 m
power with up to 400 watts of peak increases. per SAE ARP 958 at our
power. The antenna’s high gain A2LA accredited lab. 3 m
and low VSWR over its operating Flexible Mounting System calibration per ANSI C63.5
frequency translates into efficient The Model 3117 antenna includes available at additional cost.
amplifier use and high field Actual antenna factors and a
both an EMCO classic mount and a signed Certificate of Calibration
strengths. rear “stinger” mount. Conformance included with
manual.
OPTIONS
n Antenna Mast
n Antenna Tripod
Electrical Specifications
Model Frequency VSWR MaxIMUM peak IMPedance ConnectorS
Range RATIO ContINUOUS power (NOMINAL)
(avg) POwEr
3117 1 GHz - 18 GHz 3.5:1 max 300 W 400 W 50 Ω Type N
<2:1 above 1.5 GHz
Physical Specifications
mODEL WIDTH depth HEIGHT weight
3117 17.5 cm 17.5 cm + 15.5 cm mount 15.5 cm 1.13 kg
6.9 in 6.9 in + 6.1 in mount 6.1 in 2.5 lb
www.ets-lindgren.com
EMC Antennas
Double-Ridged
Waveguide Horn
Model 3117
www.ets-lindgren.com
EMC Antennas
Double-Ridged
Waveguide Horn
Model 3117
Model 3117 (1 GHz - 4 GHz)
www.ets-lindgren.com
EMC Antennas
Double-Ridged
Waveguide Horn
Model 3117
Model 3117 (9 GHz - 12 GHz)
www.ets-lindgren.com
EMC Antennas
Double-Ridged
Waveguide Horn
Model 3117
Information presented is subject to change as product enhancements are made. Contact ETS-Lindgren Sales Department for current specifications. 4/08 - PDF R © 2008 ETS-Lindgren REV G
EMC Antennas
BiConiLog
TM
Model 3142C
Features:
●
26 MHz - 3 GHz Frequency Range
●
Emissions Testing:
-- ANSI C63.4
-- FCC-15 and FCC-18
-- EN 55022
●
Individually Calibrated:
-- 1m per SAE ARP 958
-- 3m and 10m per ANSI C63.5
●
Avg. 2:1 VSWR Above 80 MHz
●
Fits Compact Chambers
●
Tough Powder Coat Finish
●
Two Year Warranty
ETS-Lindgren’s EMCO Model 3142C This model replaces the EMCO Model Options
BiConiLog is a hybrid antenna that 3142 and 3142B, and when used with ●
combines innovative design, compact optional end plates, is identical to the Optional T Bow-Tie end plates (shown below)
size, and excellent performance. This former Model 3141. The optional end ●
ETS-Lindgren offers several non-metallic,
antenna enables users to measure a plates are available to improve gain for non-reflective tripods for use at EMC test
frequency range of 26 MHz to 3.0 GHz immunity testing. These plates can sites. For easy horizontal and vertical
in one sweep, negating the need for easily be attached and detached by hand polarization changes, the Model 7-TR tripod
multiple antennas and time-consuming using screw knobs. Individual antenna is recommended
equipment setup. This single sweep calibration data- without the end plates
capability removes the need for multiple attached- is provided for emission
antennas and additional equipment, testing.
which improves accuracy and saves time
and money. Standard Configuration
●
This BiConiLog is designed as a dual- Antenna
purpose antenna that can be used for ●
Individually calibrated:
both immunity and emission testing. -- 1m per SAE ARP 958
From 26 MHz to 60 MHz, the Model -- 3m and 10 m per ANSI C63.5
3142C antenna with optional end plates
●
exhibits an average 5.5 dB gain Actual antenna factors and a signed
Certificate of Calibration Conformance
improvement vs. typical hybrid included in manual
antennas. At some frequencies, a 10 dB ETS-Lindgren’s EMCO Model 3142C BiConiLog
gain improvement is achieved. ●
Manual Antenna with Optional End Plates
EMC Antennas EMC Antennas
BiConiLog BiConiLog
Model 3142C Model 3142C
Electrical Specifications
MODEL FREQUENCY VSWR MAXIMUM IMPEDANCE CONNECTORS Model 3142C Antenna Factor (without End Plates) Model 3142C Forward Power 1m with End Plates
RANGE RATIO CONTINUOUS (NOMINAL)
(AVG) POWER
Physical Specifications
Model 3142C Forward Power 3m with End Plates Model 3142C Gain with End Plates
USA : FINLAND: UK: FRANCE: CHINA: JAPAN: ONLINE: USA : FINLAND: UK: FRANCE: CHINA: JAPAN: ONLINE:
Tel +1.512.531.6400 Tel +358.2.8383.300 Tel +44.(0)1438.730700 Tel +33.1.48.65.34.03 Tel +8610.8275.5086 Tel +81.3.3813.7100 info@ets-lindgren.com Tel +1.512.531.6400 Tel +358.2.8383.300 Tel +44.(0)1438.730700 Tel +33.1.48.65.34.03 Tel +8610.8275.5086 Tel +81.3.3813.7100 info@ets-lindgren.com
Fax +1.512.531.6500 Fax +358.2.8651.233 Fax +44.(0)1438.730751 Fax +33.1.48.65.43.69 Fax +8610.8275.5537 Fax +81.3.3813.8068 www.ets-lindgren.com Fax +1.512.531.6500 Fax +358.2.8651.233 Fax +44.(0)1438.730751 Fax +33.1.48.65.43.69 Fax +8610.8275.5537 Fax +81.3.3813.8068 www.ets-lindgren.com
Information presented is subject to change as product enhancements are made. Contact ETS-Lindgren Sales Department for current specifications. 7/03 - 1.5K S © 2003 ETS-Lindgren REV A Information presented is subject to change as product enhancements are made. Contact ETS-Lindgren Sales Department for current specifications. 7/03 - 1.5K S © 2003 ETS-Lindgren REV A
EMC Antennas EMC Antennas
BiConiLog BiConiLog
Model 3142C Model 3142C
Electrical Specifications
MODEL FREQUENCY VSWR MAXIMUM IMPEDANCE CONNECTORS Model 3142C Antenna Factor (without End Plates) Model 3142C Forward Power 1m with End Plates
RANGE RATIO CONTINUOUS (NOMINAL)
(AVG) POWER
Physical Specifications
Model 3142C Forward Power 3m with End Plates Model 3142C Gain with End Plates
Information presented is subject to change as product enhancements are made. Contact ETS-Lindgren Sales Department for current specifications. 7/03 - 1.5K S © 2003 ETS-Lindgren REV A
Antennas
Dual-Polarized
Log-Periodic
Dipole Array
Model 3145BDP
Features:
l 100 MHz - 1.1 GHz Frequency Range
ETS-Lindgren’s Model 3145BDP of the antenna yields an antenna factor operating environments. For indoor
Dual-Polarized Log-Periodic which varies linearly with frequency. use, a custom-designed aluminum
Array is a dual linearly polarized, The variation is smooth; therefore, antenna is also available.
broadband antenna designed to accurate interpolation of performance
operate over the frequency range of between specified frequency points is Calibrated at 10 m per ANSI C63.5,
100 MHz to 1.1 GHz. simple. the Model 3145BDP has actual An-
tenna Factors and a signed Certificate
The choice of scaling factors, the of Conformance included with the
various diameters of each element, Features antenna.
and the center-to-center spacing of The Model 3145BDP frequency range
the booms result in excellent VSWR of 100 MHz - 1.1 GHz makes it ideal
characteristics throughout the operat- for spectrum monitoring over a wide Standard Configuration
ing frequency range. band. Its stainless steel construction l Antenna Including Mounting
allows for operation outdoors for pro- Flange
The precise design of the feed and longed periods of time. l Individually Calibrated at 10 m
positioning of the elements on the per ANSI C63.5-1988. Actual
boom yields optimum phase relation- The 3145BDP can also be used for antenna factors gain uncertainty
ship. This causes the active region, antenna pattern measurement, includ- values and a signed Certificate of
at any given frequency, to propagate ing outdoor ranges. Calibration Conformance included
RF energy towards the smaller ele- in manual.
ments, leaving the elements behind it Manufactured of rugged stainless OPTIONS
inactive and operating as reflectors to steel, the Model 3145BDP is designed l Custom indoor configuration
improve the gain. The constant gain for prolonged outdoor use and harsh featuring aluminum construction.
www.ets-lindgren.com/3145BDP
Antennas
Dual-Polarized Log-Periodic
Dipole Array
Model 3145BDP Typical Antenna Factor Model 3145BDP Typical Antenna Gain
Electrical Specifications
MODEL # FREQUENCY INPUT VSWR maximum rf rf
range impedance input power connector
3145BDP 100 MHz - 1.1 GHz 50 Ω 1.5:1 average, 3.5:1 maximum 800 W (2) Female N Type Connectors
Physical Specifications
MODEL # HEIGHT WIDTH WEIGHT
(OVERALL) (OVERALL)
Corporate Headquarters l 1301 Arrow Point Drive l Cedar Park, Texas l USA
Phone + 1.512.531.6400 Fax 1.512.531.6500 l info@ets-lindgren.com l www.ets-lindgren.com
Offices in the US, Finland, UK, France, Singapore, Japan, China, Taiwan
Information presented is subject to change as product enhancements are made. Contact ETS-Lindgren Sales Department for current specifications. 10/07 - PDF R © 2007 ETS-Lindgren REV A
EMC Antennas
Log Periodic Model 3148
Features:
●
Better than 20 dB Cross Polarization
Rejection below 1 GHz
●
Meets CISPR 16-1 Requirements
●
200 MHz - 2 GHz Frequency Range
●
1.2:1 VSWR
●
1kW Max. Continuous Input
●
Tough Powder Coat Finish
●
Individually Calibrated
●
Furnished with Uncertainty Values
●
Two Year Warranty
Model 3148
Meets CISPR 16
Cross Polarization Requirements
The ETS-EMCO Model 3148 Log Periodic The precision construction of the Standard Configuration
Antenna is specifically designed for assembly of the boom and elements result ●
Antenna
making CISPR 16-1 measurements which in excellent VSWR and optimal phase
●
require a 20 dB difference in the cross relationship. This antenna features Individually Calibrated at 1 m per SAE ARP
polarization rejection. This is achieved relatively constant linear gain (measures 958 and 3 and 10 m per ANSI C63.5-1988.
Actual antenna factors, uncertainty values,
using an engineering design and manu- in far field without any sudden “dips” or
and a signed Certificate of Calibration
facturing process that offsets all of the “bumps”). Conformance included in manual.
elements in a precision pattern. The
excellent cross-polarization property A Type N connector is provided. The
antenna mount accepts a standard
Options
ensures minimum measurement ●
ETS-EMCO Tripod, ETS-EMCO offers several
uncertainty for radiated emissions and ¼ in x 20 thread used by most tripods.
non-metallic, non-reflective tripods for use
normalized site attenuation measurement. at EMC test sites.
●
Support Rod
1
Information presented is subject to change as product enhancements are made. Contact ETS Sales Department for current specifications. 4/00 - 1 k R © 2000 ETS-EMCO REV B
EMC Antennas
Log Periodic Model 3148
Applications
MODEL FCC-15 FCC-18 IEC/CISPR/EN SAE J1113 SAE J551 MIL-STD-462 MIL-STD-1541 MIL-STD-285 NACSIM VCCI
Electrical Specifications
MODEL FREQUENCY VSWR MAXIMUM PEAK IMPEDANCE CONNECTOR
RANGE RATIO CONTINUOUS POWER (NOMINAL)
(AVG) POWER
Physical Specifications
MODEL WIDTH * DEPTH HEIGHT WEIGHT
* At widest point
Information presented is subject to change as product enhancements are made. Contact ETS Sales Department for current specifications. 4/00 - 1 k R © 2000 ETS-EMCO REV B
Model 3148 Technical Data
Information presented is subject to change as product enhancements are made. Contact ETS Sales Department for current specifications. 4/00 - 1 k R © 2000 ETS-EMCO REV B
EMC Antennas
Log Periodic Model 3148
Information presented is subject to change as product enhancements are made. Contact ETS Sales Department for current specifications. 4/00 - 1 k R © 2000 ETS-EMCO REV B
Wireless Antennas
Open Boundary
Quadridge Horn
Models 3164-05
Features:
● 2 GHz - 18 GHz Frequency Range
● Flat Gain For Upper 2/3 of Range
● Low Side Lobes
● Linear or Circular Polarization
(With Hybrid)
● Compact Design
● Flexible Mounting Schemes
-- Flange for Wall Mounting
-- Bracket for Tripod Mounting ETS-Lindgren’s Model 3164-05 Quadridge Horn
The Model 3164-05 Open to two Vivaldi PCB antennas placed The Model 3164-05 has exceptional
Boundary Quadridge Horn is the orthogonally to each other. The bandwidth. While the frequency band
newest in a series of quadridge horns antenna’s surprisingly compact size for optimum performance is 2 GHz to
from ETS-Lindgren. The “open offers improved pattern and gain when 18 GHz, the antenna is usable from
boundary” design with its absence of compared with enclosed quadridge 1.5 GHz. Two orthogonally placed input
side plates makes this antenna unique horns of similar dimensions. The feeds allow this antenna to generate
in both appearance and performance. compact size also means there is only both linear and circular polarized
small shift on the Model 3164’s phase measurements across the entire
Numerically modeled, the Model center as frequency changes. frequency band.
3164’s open boundary design is similar
Electrical Specifications
MODEL FREQUENCY CROSS- IMPEDENCE CONNECTOR
RANGE POLARIZATION (NORMAL)
ISOLATION
Physical Specifications
MODEL LENGTH WIDTH HEIGHT WEIGHT
(OVERALL) (APERTURE) (APERTURE)
3164-05 18.4 cm 17.1 cm 17.1 cm 0.71 kg
7.3 in 6.7 in 6.7 in 1.56 lb
Information presented is subject to change as product enhancements are made. Contact ETS-Lindgren Sales Department for current specifications. 6/05 - 2K W © 2005 ETS-Lindgren REV A
Wireless Antennas
Open Boundary
Quadridge Horn
Model 3164-05
Information presented is subject to change as product enhancements are made. Contact ETS-Lindgren Sales Department for current specifications. 6/05 - 2K W © 2005 ETS-Lindgren REV A
Wireless Antennas
Open Boundary
Quadridge Horn
Model 3164-05
Information presented is subject to change as product enhancements are made. Contact ETS-Lindgren Sales Department for current specifications. 6/05 - 2K W © 2005 ETS-Lindgren REV A
Wireless Antennas
Open Boundary
Quadridge Horn
Model 3164-05
Information presented is subject to change as product enhancements are made. Contact ETS-Lindgren Sales Department for current specifications. 6/05 - 2K W © 2005 ETS-Lindgren REV A
Wireless Antennas
Open Boundary
Quadridge Horn
Model 3164-05
Information presented is subject to change as product enhancements are made. Contact ETS-Lindgren Sales Department for current specifications. 6/05 - 2K W © 2005 ETS-Lindgren REV A
Wireless Antennas
Open Boundary
Quad-RidgedModels
Horn 3164-06
Features:
● 300 MHz - 6 GHz Frequency Range
● Flat Gain For Upper 2/3 of Range
● Linear or Circular Polarization
(With Hybrid Coupler)
● Compact Design
● Maintains Shielding Integrity
When Wall Mounted
The Model 3164-06 Open Boundary similar to double-ridged waveguide performance from 300 MHz to 6 GHz.
Quad-Ridged Horn is the newest in a antennas placed orthogonally to each Two orthogonally placed input feeds
series of quad-ridged horns from other. The antenna’s compact size allow this antenna to be used for both
ETS-Lindgren. The “open offers improved pattern and gain linearly and circularly polarized
boundary” design with its absence when compared with enclosed quad- measurements across the entire
of side plates makes this antenna ridged horns of similar dimensions. frequency band, without manual
unique in both appearance and polarization.
performance. The Model 3164-06 has exceptional
bandwidth. With an operating
Numerically modeled, the Model frequency band for optimum
3164’s open boundary design is
Electrical Specifications
MODEL FREQUENCY CROSS- IMPEDENCE CONNECTOR
RANGE POLARIZATION (NORMAL)
ISOLATION
Physical Specification
MODEL LENGTH WIDTH HEIGHT WEIGHT
(OVERALL) (APERTURE) (APERTURE)
3164-06 51.4 cm 50.0 cm 50.0 cm 9.3 kg
20.3 in 19.8 in 19.8 in 20.5 lb
Information presented is subject to change as product enhancements are made. Contact ETS-Lindgren Sales Department for current specifications. 3/07 - 3K W/RE © 2007 ETS-Lindgren REV A
Wireless Antennas
Open Boundary
Quad-Ridged Horn
Model 3164-06
Information presented is subject to change as product enhancements are made. Contact ETS-Lindgren Sales Department for current specifications. 3/07 - 3K W/RE © 2007 ETS-Lindgren REV A
Wireless Antennas
Open Boundary
Quad-Ridged Model
Horn 3164-06
Information presented is subject to change as product enhancements are made. Contact ETS-Lindgren Sales Department for current specifications. 3/07 - 3K W/RE © 2007 ETS-Lindgren REV A
EMC Antennas
Broadband
Mini-Bicon Antenna
Model 3180B
FEATURES:
n Frequency Range:
-- Large Cage Elements: 30 MHz – 1 GHz
-- Small Cone Elements: 30 MHz – 3 GHz
n Omnidirectional Pattern
n Ideal for:
-- Chamber Characterization
-- Broadband Spectrum Monitoring
-- Field Measurements
The ETS-Lindgren Model 3180B Model 3180B covers all of the VHF APPLICATIONS
Broadband Mini-Bicon Antenna has and UHF bands, making it ideal for n Fully Anechoic Room Testing
been designed for optimal perfor- spectrum monitoring of FM, TV and n Harmonic Level Measurements
mance across the frequency range some cellular phones.
of 30 MHz – 1 GHz (cage ele- n Spectrum Monitoring
ments) and 30 MHz – 3 GHz (cone With the small cone elements in n CISPR 16-1-4
elements). The Model 3180B’s place, the 3180B can be used up to
uniquely designed elements provide 3 GHz.
STANDARD CONFIGURATION
a omnidirectional pattern, without
the beam splitting. Radiation Pattern n Antenna Includes:
The Model 3180B has been de- -- Balun
The Model 3180B is ideal for the signed to have a radiation pattern -- One Pair of Cage Elements
that is omnidirectional. The ele- -- One Pair of Cone Elements
free space NSA (FSNSA) test for
fully anechoic rooms. Its small size ments have been optimized to avoid n Manual
allows for harmonic monitoring when any splitting of the main radiation n Individually calibrated. Actual
testing per the IEC 61000-4-3. beam in the elevation cut. factors and a signed Certificate
of Calibration Conformance
Flexible Mounting System included.
FEATURES The Model 3180B antenna includes
Frequency Range both an EMCO block mount and a
The Model 3180B covers the rear “stinger” mount.
traditional frequency range EMC
measurements. Additionally, the
www.ets-lindgren.com
EMC Antennas
Broadband Mini-Bicon Antenna
Model 3180B
Electrical Specifications
MODEL FREQUENCY VSWR MAXIMUM IMPEDANCE CONNECTORS
RANGE RATIO CONTINUOUS (NOMINAL)
(AVG) POWER
3180B (Cage Elements) 30 MHz - 1 GHz ~ 5:1 200 W 50 Ω Type N (F)
Physical Specifications
MODEL LENGTH HEIGHT WIDTH
3180B (Cage Elements) 72.16 cm 40.00 cm 66.34 cm
28.41 in 15.75 in 26.12 in
3180B (Cone Elements) 60.45 cm 16.50 cm 30.07 cm
23.80 in 6.50 in 11.84 in
www.ets-lindgren.com
EMC Antennas
Broadband Mini-Bicon Antenna
Model 3180B
Information presented is subject to change as product enhancements are made. Contact ETS-Lindgren Sales Department for current specifications. 1/12 - PDF/RR © 2012 ETS-Lindgren REV A
EMC Antennas
Broadband
Mini-Bicon Antenna
Model 3183
FEATURES:
n 1 GHz - 18 GHz Frequency Range
n Ideal for:
-- Chamber Characterization per CISPR 16
-- Harmonic Measurements per IEC 61000-4-3
THE ETS-LINDGREN MODEL 3183 the H-plane. This means the STANDARD CONFIGURATION
BROADBAND MINI-BICON ANTENNA antenna can receive signals from
n Antenna
was designed for CISPR 16 cham- every direction around its axis.
ber characterization. The antenna n Antenna Mount for Tripod
has a broadband frequency range CISPR 16 Conformance n Manual
of 1 GHz - 18 GHz. Its omnidirec- The radiation pattern closely con-
n Individually Calibrated at 1 m
tional pattern conforms to CISPR 16 forms to the CISPR 16 requirements
per SAE ARP 958 at our
specifications. for chamber validation. Because of
A2LA accredited lab. Actual
its small size, the antenna can also
Antenna Factors and a Signed
be used for amplifier harmonic
Certificate of Calibration
FEATURES measurements when performing
Conformance Included
Frequency Range tests per the IEC 61000-4-3.
with Manual
The Model 3183 is designed to
have the lowest possible VSWR Spectrum Monitoring
across its range of operation. The Model 3183 can be used for
The antenna exhibits an average EM Field surveying and spectrum OPTIONAL CONFIGURATION
2:1 VSWR. monitoring. The low weight design n ETS-Lindgren offers several
allows use as a field surveying tool, non-metallic, non-reflective
Radiation Pattern in conjunction with a portable tripods
The radiation pattern of the spectrum analyzer.
Model 3183 is omnidirectional in
www.ets-lindgren.com
EMC Antennas
Broadband Mini-Bicon Antenna
Model 3183
Electrical Specifications
MODEL FREQUENCY VSWR MAXIMUM IMPEDANCE CONNECTORS
RANGE RATIO CONTINUOUS (NOMINAL)
(AVG) POWER
3183 1 GHz - 18 GHz 2:1 50 watts @ 1 GHz 50 Ω SMA (F)
25 watts @ 18 GHz
Physical Specifications
MODEL LENGTH WIDTH STINGER WEIGHT
LENGTH
3183 36.2 cm 7.0 cm 17.8 cm .5 kg
14.25 in 2.76 in 7.0 in 1.1 lbs
Model 3183 Typical Elevation Pattern Model 3183 Typical Elevation Pattern
2 GHz - 7 GHz 8 GHz - 13 GHz
Model 3183 Typical Elevation Pattern Model 3183 Typical Azimuth Pattern
14 GHz - 18 GHz 2 GHz - 18 GHz
Information presented is subject to change as product enhancements are made. Contact ETS-Lindgren Sales Department for current specifications. 7/09 - PDF R © 2009 ETS-Lindgren REV B
Wireless Electromechanical Passive Active RF Radiation Power
Products RF Switches Components Components Safety Products Meters/Monitors
Waveguide Horns
1.12-40 GHz
STANDARD GAIN HORNS
· Primary Standard of Antenna Gain
· 10 Models Cover from 1.12 GHz to 40 GHz
SPECIFICATIONS
FREQUENCY WAVEGUIDE INPUT VSWR WEIGHT
RANGE MODEL BAND* SIZE COVER FLANGE (Max) lbs. Kg
(GHz) EQUIVALENT
1.12-1.7 646 L WR-650 UG-418A/U 1.25 42 19.1
1.70-2.6 645 LS WR-430 UG-437A/U 1.25 11 5
2.60-3.95 644 S WR-284 UG-584/U 1.15 6 2.8
3.95-5.85 643 C WR-187 UG-407/U 1.15 2.3 1.1
5.4-8.20 642 XN WR-137 UG-441/U 1.15 1.0 0.5
7.05-10 641 XB WR-112 UG-138/U 1.15 0.5 0.23
8.20-12.4 640 X WR-90 UG-135/U 1.15 0.5 0.23
12.4-18 639 KU WR-62 UG-419/U 1.15 0.2 0.1
18-26.5 638 K WR-42 UG-595/U 1.15 0.2 0.1
26.5-40 V637 V WR-28 UG-599/U 1.15 0.1 0.05
*For a complete listing of all band letters and codes in use, refer to
Band Designation Table on page 386.
Patterns for all models in this series conform to the following
description: Beam width in E and H plane varies from 23° at the
highest frequency to 34° at the lowest frequency. Side lobes in
the H plane are all more than 20 dB down. First side lobes in the
E plane are 13 dB down, second side lobes are 18 dB down and
all other E plane lobes are more than 20 dB down.
Gain at Mid Frequency; 16.5 dB (with reference to isotropic radiation)
variation is 1.5 dB over total band about the mid band value.
See Waveguide Flange Data on page 397.
USA TEL: (1) 631 231-1700 • INT’L TEL: (1) 631 231-1390 • FAX (1) 631 231-1711
394 E-MAIL: nardaeast@L-3COM.com • www.nardamicrowave.com
Power RF Radiation Active Passive Electromechanical Wireless
Meters/Monitors Safety Products Components Components RF Switches Products
Waveguide Horns
OUTLINE DRAWING
A B C
MODEL
MAX MAX MAX
USA TEL: (1) 631 231-1700 • INT’L TEL: (1) 631 231-1390 • FAX (1) 631 231-1711
E-MAIL: nardaeast@L-3COM.com • www.nardamicrowave.com 395
Wireless Electromechanical Passive Active RF Radiation Power
Products RF Switches Components Components Safety Products Meters/Monitors
Waveguide Horns
REFERENCE GUIDE
WAVEGUIDE TO COAXIAL ADAPTERS FOR STANDARD GAIN HORN
USA TEL: (1) 631 231-1700 • INT’L TEL: (1) 631 231-1390 • FAX (1) 631 231-1711
396 E-MAIL: nardaeast@L-3COM.com • www.nardamicrowave.com
Power RF Radiation Active Passive Electromechanical Wireless
Meters/Monitors Safety Products Components Components RF Switches Products
LS BAND L BAND
USA TEL: (1) 631 231-1700 • INT’L TEL: (1) 631 231-1390 • FAX (1) 631 231-1711
E-MAIL: nardaeast@L-3COM.com • www.nardamicrowave.com 397
Radio-Research Instrument Co., Inc.
584 North Main Street,
Waterbury CT 06704
Ph: 203.753.5840
Fax: 203.754.2567
Email: Radiores@prodigy.net
SPECIFICATIONS
1.12-1.7
Freq. GHz
15.5
GAIN
30-27
BW
12-1.1
MODEL
10/12/2012 | Page 1 of 1
Radio-Research Instrument Co., Inc.
584 North Main Street,
Waterbury CT 06704
Ph: 203.753.5840
Fax: 203.754.2567
Email: Radiores@prodigy.net
SPECIFICATIONS
3.9-5.85
Freq. GHz
18
GAIN
23-22
BW
12-3.9
MODEL
10/12/2012 | Page 1 of 1
Radio-Research Instrument Co., Inc.
584 North Main Street,
Waterbury CT 06704
Ph: 203.753.5840
Fax: 203.754.2567
Email: Radiores@prodigy.net
SPECIFICATIONS
5.85-8.2
Freq. GHz
22
GAIN
12-13
BW
12-5.8
MODEL
10/12/2012 | Page 1 of 1
Waveguide Horn Antennas
Features
▪ Primary Standard of Antenna Gain
▪ 7 Models Cover from 2.60 GHz to 40 GHz
Models
▪ 644, 643, 642, 640, 639, 638, V637
Patterns for all models in this series conform to the following description: Beam width in E and H plane varies from 23° at the highest
frequency to 34° at the lowest frequency. Side lobes in the H plane are all more than 20 dB down. First side lobes in the E plane are 13
dB down, second side lobes are 18 dB down and all other E plane lobes are more than 20 dB down.
Gain at Mid Frequency; 16.5 dB (with reference to isotropic radiation) variation is 1.5 dB over total band about the mid band value.
See Waveguide Flange Data on the following pages for flange detail.
B: See Standard Gain Horns Charts at the end of this section.
Patterns for all models in this series conform to the following description: Beam width in E and H plane varies from 23° at the highest
frequency to 34° at the lowest frequency. Side lobes in the H plane are all more than 20 dB down. First side lobes in the E plane are 13
dB down, second side lobes are 18 dB down and all other E plane lobes are more than 20 dB down.
Gain at Mid Frequency; 16.5 dB (with reference to isotropic radiation) variation is 1.5 dB over total band about the mid band value.
See Waveguide Flange Data on the following pages for flange detail.
B: See Standard Gain Horns Charts at the end of this section.
Outline Drawings For Models : 644, 643, 642, 640, 639, 638, V637
Units A B C
644
in. 15.82 9.52 7.16
mm 401.83 241.81 181.86
643
in. 10.47 6.34 4.80
mm 265.94 161.04 121.92
642
in. 7.76 4.67 3.53
mm 197.10 118.62 89.66
640
in. 5.06 3.09 2.34
mm 128.52 78.49 59.44
639
in. 3.48 2.20 1.73
mm 88.39 55.88 43.94
638
in. 2.57 1.51 1.16
mm 65.28 38.35 29.46
V637
in. 1.76 1.06 .82
mm 44.70 26.92 20.83
Notes:
Dimensions are maximum and for reference only. Contact the factory for detailed specifications and outline drawing.
Product Features
• Standard WaveguideSizes
• 1.70-40 GHZ
• Gain 10, 15, & 20 dB
• 15 Octave bands
Specifications (1)
Parameter Value Units Description
Impedance 50 Ohms
Minimum Frequency 1.70 GHz
Maximum Frequency 40 GHz
Polarization Linear
VSWR 1.25
Body Aluminum
Flanges STD UG Flanges
Connector N Female Brass nickel plated
(1) Pasternack reserves the right to change specifications or information without notice.
(2) All Specifications “typical”
www.pasternack.com
Toll Free: (866) 727-8376
Direct: +1 (949) 261-1920 Standard Gain Horns
Fax: +1 (949) 261-7451 N Female Connectors
Email: sales@pasternack.com
PO Box 16759. Irvine, CA 92623-6759
(1)
Specifications & Ordering Information
FREQUENCY 3 dB Width Dimensions
*N CONNECTOR WAVEGUIDE
Description RANGE GAIN
MODEL NO. SIZE E-Plane H-Plane A B C
(DC TO GHz)
PE9854/NF-10 10 dB 55.3° 50.9° 2.00 1.16 0.82
WR62 Standard Gain Horn with N Female
PE9854/NF-15 WR62 12.40-18.00 15 dB 30.1° 31.2° 3.48 1.88 1.47
Connector 10, 15 & 20 dB Gain
PE9854/NF-20 20 dB 18.8° 18.9° 6.80 3.00 2.24
PE9855/NF-10 10 dB 50.2° 49.2° 2.88 1.39 1.04
WR75 Standard Gain Horn with N Female
PE9855/NF-15 WR75 10.00-15.00 15 dB 35.4° 28.5° 5.70 2.36 1.45
Connector 10, 15 & 20 dB Gain
PE9855/NF-20 20 dB 16.3° 17.2° 8.85 4.00 3.10
PE9856/NF-10 10 dB 48.5° 47.4° 2.82 1.70 1.27
WR90 Standard Gain Horn with N Female
PE9856/NF-15 WR90 8.20-12.40 15 dB 29.3° 29.0° 6.45 2.80 2.05
Connector 10, 15 & 20 dB Gain
PE9856/NF-20 20 dB 16.1° 16.5° 11.06 5.00 3.70
PE9857/NF-10 10 dB 55.5° 54.1° 4.13 1.69 1.27
WR102 Standard Gain Horn with N Female
PE9857/NF-15 WR102 7.00-11.00 15 dB 29.6° 29.3° 7.28 3.15 2.36
Connector 10, 15 & 20 dB Gain
PE9857/NF-20 20 dB 17.0° 16.7° 12.28 5.68 4.04
PE9858/NF-10 10 dB 56.8° 55.2° 4.02 1.75 1.30
WR112 Standard Gain Horn with N Female
PE9858/NF-15 WR112 7.05-10.00 15 dB 32.4° 32.0° 7.79 3.05 2.25
Connector 10, 15 & 20 dB Gain
PE9858/NF-20 20 dB 19.3° 19.3° 12.27 5.10 3.77
PE9859/NF-10 10 dB 55.1° 54.2° 4.41 2.15 1.60
WR137 Standard Gain Horn with N Female
PE9859/NF-15 WR137 5.85-8.20 15 dB 33.7° 33.2° 7.80 3.53 2.60
Connector 10, 15 & 20 dB Gain
PE9859/NF-20 20 dB 18.7° 18.8° 13.45 6.45 4.65
PE9860/NF-10 10 dB 59.8° 48.3° 5.91 2.81 1.70
WR159 Standard Gain Horn with N Female
PE9860/NF-15 WR159 4.90-7.05 15 dB 31.3° 30.8° 9.53 4.43 3.27
Connector 10, 15 & 20 dB Gain
PE9860/NF-20 20 dB 14.3° 16.9° 13.25 10.00 7.80
PE9861/NF-10 10 dB 55.0° 54.1° 17.51 3.29 2.19
WR187 Standard Gain Horn with N Female
PE9861/NF-15 WR187 3.95-5.85 15 dB 33.8° 33.3° 11.28 4.98 3.67
Connector 10, 15 & 20 dB Gain
PE9861/NF-20 20 dB 18.9° 19.2° 16.88 9.07 6.70
PE9862/NF-10 10 dB 58.6° 51.9° 17.98 3.71 2.73
WR229 Standard Gain Horn with N Female
PE9862/NF-15 WR229 3.30-4.90 15 dB 32.7° 32.4° 7.05 6.63 6.00
Connector 10, 15 & 20 dB Gain
PE9862/NF-20 20 dB 17.1° 16.7° 25.63 12.40 8.75
PE9863/NF-10 10 dB 50.8° 54.1° 10.00 4.40 3.58
WR284 Standard Gain Horn with N Female
PE9863/NF-15 WR284 2.60-3.95 15 dB 31.0° 30.6° 23.25 9.00 5.60
Connector 10, 15 & 20 dB Gain
PE9863/NF-20 20 dB 17.2° 16.5° 32.25 15.70 10.80
PE9864/NF-10 10 dB 64.8° 45.4° 14.00 8.15 4.14
WR430 Standard Gain Horn with N Female
PE9864/NF-15 WR430 1.70-2.60 15 dB 33.1° 32.0° 26.60 11.85 8.50
Connector 10, 15 & 20 dB Gain
PE9864/NF-20 20 dB 17.3° 17.4° 44.00 22.25 16.20
(1) Pasternack reserves the right to change specifications or information without notice.
(2) All Specifications “typical”
www.pasternack.com