Professional Documents
Culture Documents
Problem Set No. 4
Problem Set No. 4
Instructions: Solve the following problems. Show your complete solutions including the
necessary free-body diagrams in a separate sheet of paper.
I. Method of Joints
1. The portion of truss shown represents the upper part of a power transmission
line tower. For the given loading, determine the force in each of the members
located above HJ. State whether each member is in tension or compression.
2. The truss shown in figure is pin connected only at the lettered joints. Find the
force acting in each member.
3. Determine the force in each bar of the truss shown in the figure in terms of P.
4. Find the force in members AB, AC, BC, CD and CE for the truss shown, if each
load P = 1500 lb and each Q = 2500 lb
II. Zero-Force Member
1. Using the method of joints, indicate all the members of the truss shown in figure
that have zero force
2. The roof truss shown in Figure is pinned at point A, and supported by a roller
at point H. Determine the force in member DG and DF.
3. The weight of the bucket is The cable passes over pulleys at A and D.
Determine the axial forces in members IK and JL