Professional Documents
Culture Documents
PhilGeoid HowTo
PhilGeoid HowTo
PhilGeoid HowTo
1. Extract the zip file (PhilGeoidApp2018) to the desired location, then go to the
location where you extracted the files.
6. Input the Latitude and Longitude values and the computed Geoid Value will
automatically appear.
1. Edit the sample point file-input.dat file in Notepad to enter your list of
points in PtID, latitude and longitude
PointID<space>Latitude<space>Longitude
Notes:
a. File should be stored in the same directory/folder as the PhilGeoid
application.
b. Latitude/longitude values should be in decimal degrees.
c. PointID can be alphneumeric but up to three charters only
2. Open the PhilGeoid application, click the 'Select grid' to choose the correct
grid file (e.g. geoid2018.98_itrffit.gri for input files containing ITRF
coordinates).
3. Click 'Select point file' and navigate to the PhilGeoid folder and Select the
edited point file-input.
4. Click 'Output to file' and type the desired filename of the output file, click
'Save'.
PointID<space>Latitude<space>Longitude<space>GeoidValue