Professional Documents
Culture Documents
Hot Rolled and Normalized Hot Rolled and Normalized Hot Rolled and Normalized Hot Rolled and Normalized
Hot Rolled and Normalized Hot Rolled and Normalized Hot Rolled and Normalized Hot Rolled and Normalized
Hot Rolled and Normalized Hot Rolled and Normalized Hot Rolled and Normalized Hot Rolled and Normalized
Case-Hardening
surface hardened
2310 221 Steel, Carbon 10084 (1998) C15E 1.1141 to 58-62 HRC
Steel
FLS جدول تبدیل شماره مواد براساس استاندارد
MAT Old MAT No. Category EN/ ASTM/ BS MATERIAL No. DIN Condition
Flame and
Induction
10083-1 (1991) Quenched and
2320 222 Hardening Steel,
+ A1 (1996)
42CrMo4 1.7225 tempered steels
Low Alloy Steel,
Cr-Mo
Hot rolled steels
Spring Steel,
2400 230 Mn-Si-Alloyed
10089 (2002) 55Si7 1.5026 for quenched and
tempered springs
Tool Steel,
2410 242 Carbon Steel
96 (1979) CT 8 - Wrought tool steel
Tool Steel,
2420 243 Carbon Steel
96 (1979) CT 105 - Wrought tool steel
Tool Steel, low- alloyed
2430 246 Cr-Alloyed
96 (1979) , 102 Cr -
cold-work steel
Tool Steel, low- alloyed
2440 247 Mn-Cr-W-Alloyed
96 (1979) , 107 WCr 5 - cold-work steel
Tool Steel, low- alloyed
2450 248 Cr-Ni-Mo-Alloyed
- 50 NiCr 13 , 1.2721 cold-work steel
Cast Steel,
A 27/A 27M Gr. 65-35 Unalloyed Steel
2510 320 Carbon Steel, - casting
Weldable (2003) [450-240]
Cast Steel,
A 27/A 27M Gr. 70-36 Unalloyed Steel
2520 321 Carbon Steel,
(2003) [485-250]
-
casting
Weldable
Cast Steel,
Unalloyed Steel
2530 32A Carbon Steel, 0.18% C0.3-0.6%Si 1.1-1.5%Mn 0.04%P 0.04%S casting
Weldable
Unalloyed heat
Cast Steel , DIN 17205
2550 325 Carbon Steel
GS-30Mn5 1.1165 treated steel
(1992) casting
FLS جدول تبدیل شماره مواد براساس استاندارد
MAT Old MAT No. Category EN/ ASTM/ BS MATERIAL No. Other Condition
Cast Steel,
DIN 17205 Quenched and
2551 - Carbon Steel,
(1992)
GS-30Mn5 1.1165 tempered steel
Heat treatment II
casting
Wear Resistant
Suitable for
2560 322 Cast Steel, BS 3100 (1984) AW 2 - surface hardening
Carbon Steel
Wear Resistant
Suitable for
2570 324 Cast Steel, BS 3100 (1984) AW 3 - surface hardening
Carbon Steel
Pearlitic grey cast
Grey Cast Iron,
2610 303, 311 Unalloyed
EN 1561 (1997) EN-GJL-200 EN-JL1030 iron with lamellar
graphite
Pearlitic grey cast
Grey Cast Iron,
2620 304, 312 Unalloyed
EN 1561 (1997) EN-GJL-250 EN-JL1040 iron with lamellar
graphite
Pearlitic grey cast
Grey Cast Iron,
2630 305, 313 Unalloyed
EN 1561 (1997) EN-GJL-300 EN-JL1050 iron with lamellar
graphite
Ductile Cast Iron, EN-GJS-400-18-
2640 308 Unalloyed
EN 1563 (1997) EN-JS1024 Ferritic matrix
RT
Ductile Cast Iron, Ferritic-pearlitic
2650 309 Unalloyed
EN 1563 (1997) EN-GJS-500-7 EN-JS1050 matrix
Ductile Cast Iron, Allowed free
2660 310 Unalloyed
EN 1563 (1997) EN-GJS-600-3 EN-JS1060 cementite 2%
Cu-alloy, casting, P added to the
2810 401 Sn-bronze, EN 1982 (1998) CuSn12-B CB483K melt for
P-bronze deoxidation
Cu-alloy, casting, P added to the
2815 402 Sn-bronze, EN 1982 (1998) CuSn10-B CB480K melt for
P-bronze deoxidation
MAT Old MAT No. Category EN/ ASTM/ BS MATERIAL No. Other Condition
ASTM B 23 Sn, Cu, Sb, Pb-
2850 410 White Metal Alloy No. 3 , UNS L13840 alloy
(2000)
ASTM B 23
2855 411 White Metal
(2000)
Alloy No 2 UNS L13890 Sn, Cu, Sb- alloy
ASTM B 23
2865 413 White Metal Alloy No. 15 UNS L53620 Sb-Pb alloy
(2000)
Used for fittings
2910 420 Brass EN 1982 (1998) CuZn33Pb2-B CB750S and fixture
plates, bands,
bars, wire and
2915 421 Brass EN 1652 (1997) CuZn37 CW508L profiles of varying
hardness
EN AC - Al, Si- alloy for
2950 450 Al-cast alloy EN 1706 (2000)
AlSi12(b)
AC - 44100 sand casting
Quenched and
Abrasion
3100 116 Resistant Steel
- - Hardox 400 tempered wear
resistant steel
Quenched and
Abrasion
3110 117 Resistant Steel
- - Hardox 500 tempered wear
resistant steel
Quenched and
Abrasion
3115 - Resistant Steel
- - Hardox 600 tempered wear
resistant steel
FLS جدول تبدیل شماره مواد براساس استاندارد
MAT Old MAT No. Category EN/ ASTM/ BS MATERIAL No. Other Properties
Cast Steel,
Austenitic S-EW 395
3120 330 Manganese
G-X 120 Mn 13 DIN 1.3802 Hadfield steel
(1998)
Steel,12% Mn
resist heating to
Cast Steel,
350°C for a long
Austenitic A 128/A 128M
3121 33A Manganese Steel (1993)
Gr. E-1 - time and
400-500°C for a
12% Mn+ Mo
shorter time
Cast Steel,
austenitic
Austenitic A 128/A 128M
3122 33B Manganese Steel (1993)
Gr. C - and therefore non-
magnetic
12% Mn+ Cr
{Heat Treatement I} Heat-resistant and
Cast Steel, annealed +
wear-resistant
3400 332 Low Alloy Steel, tempered or GS 42 CrMo 4 DIN 1.7225
cast steel
Cr-Mo normalised +
tempered condition up to 400-500°C.
{Heat Treatement II}
Cast Steel,
air quenched and Cr-Mo-alloyed cast
3401 332 Low Alloy Steel,
tempered GS 42 CrMo 4 DIN 1.7225 steel
Cr-Mo
condition
{Heat Treatement III}
Cast Steel,
liquid quenching Cr-Mo-alloyed cast
3402 332 Low Alloy Steel,
followed by GS 42 CrMo 4 DIN 1.7225 steel
Cr-Mo
tempering
Wear Resistant
Cast Steel, C: 0.7-0.9% Si: 0.55-0.65% Mn: 0.75-0.85% Cast lining parts
3406 33D, 332D Low Alloy Steel, Cr:1.75-2.25% Mo: 0.35-0.45% 350 – 410HV
Cr-Mo
Wear Resistant
Cast Steel, EN 10213-2 Wear resistant
3407 33E Low Alloy Steel, (1996)
GS-17 CrMo 5 5 1.7357 steel
Cr-Mo
FLS جدول تبدیل شماره مواد براساس استاندارد
MAT Old MAT No. Category EN/ ASTM/ BS MATERIAL No. Other Properties
Wear Resistant
Cast Steel, Wear-resistant
3410 333 Low Alloy Steel,
- GS-34 CrNiMo 6 1.6582 Expected hardness
HB 250 - 300
Cr-Ni-Mo
Abrasion Chromium alloyed
ASTM A 532/
Resistant Cast EN-GJN- Structure: eutectic or
3420 361 Iron, Cr-Alloyed
A 532M (1993) EN-JN3049
HV600(XCr23) slightly hypoeutectic
Class III, Type A 580 – 660HV
(Ducrodan)
Abrasion Chromium alloyed
ASTM A 532/
Resistant Cast EN-GJN- Structure: eutectic or
3421 362 Iron, Cr-Alloyed
A 532M (1993) EN-JN3049
Class III, Type A HV420(XCr23) slightly hypoeutectic
(Ducrodan) 390 - 450HV
MAT Old MAT No. Category EN/ ASTM/ BS MATERIAL No. Other Properties
ASTM A 532/A
Abrasion high abrasion
532M (1993) EN 12513 (2000) ,
Resistant Cast resistance and a
3831 364 Iron, Cr-Mo-Ni-
Casting Class EN-GJN-HV600 EN-JN3039 rather good impact
Alloyed II, Type D (XCr18) resistance 600HV
20 % Cr
Abrasion Firth Rixson FR high abrasion
Resistant Cast C: 2.6-2.8 % Si: 0.6-0.8% Mn: 0.8-1.0% resistance and a
3832 3830 Iron, Cr-Ni-Mo- P: <0.10% S:<0.06% rather good impact
Alloyed Cr: 18.0-19.5% Mo: 0.70-0.80% Ni: <0.5 Cu: 0.90-1.0% resistance 600HV
Abrasion Firth Rixson FM high abrasion
Resistant Cast C: 2.6-2.8 % Si: 0.6-0.8% Mn: 0.8-1.0% resistance and a
3833 3831 Iron. Cr-Ni-Mo- P: <0.10% S:<0.06% rather good impact
Alloyed Cr: 18.0-19.5% Mo: 1.40-1.50% Ni: <0.5 Cu: 0.90-1.0% resistance 600HV
enhanced
Weather- ASTM A 588/A
EN 10155 (1994) atmospheric
4100 270 Resistant Steel 588M (2003)
S355J0WP
1.8946 corrosion
(Cor-Ten®) Plate Gr. A
resistance
ASTM A 276a
Corrosion- EN 10088-3 hardenable family
(2003) Plate
4400 260 Resistant Steel,
UNS S42000,
(1995) 1.4021 of stainless steels,
Cr-Alloyed X20Cr13 and thus magnetic
Type 420
ASTM A 276a
Corrosion- EN 10088-3
(2003) Plate high mechanical
4410 261 Resistant Steel,
UNS S43100,
(1995) 1.4057 properties
Cr-Alloyed X17CrNi 16-2
Type 431
Austenitic- ASTM A 240/ A high strength, low
EN 10088-1
Ferritic 240M (2001) thermal expansion
4420 - Stainless Steel Plate (1995) 1.4462 and high heat
(Duplex Steel) UNS S31803 X2CrNiMiN22-5-3 conductivity
irregularly shaped
Malleable Cast ASTM A 47/A nodules of
5150 316 Iron 47M (1999)
Gr. 32510 [22010] GTS-35-10 graphite in a
ferritic matrix
FLS جدول تبدیل شماره مواد براساس استاندارد
MAT Old MAT No. Category EN/ ASTM/ BS MATERIAL No. Other Properties
high resistance
Heat-Resistant Rm 400MPa Re 300MPa El% 2 against
5410 318 Ductile Cast Iron E 160GPa HB 210-280 scaling for long
periods up to 900 °C
Wrought Weldable,
EN 10088-1 1.4003
5420 - Stainless Steel, UNS S41003 structural non
Cr-Alloyed (1995) 3Cr12
austenitic
ASTM A 743/ Heat resistant
Heat-Resistant
ferritic steel, good
5430 342 Cast Steel, A 743M (2003) G-X40 CrSi 13 1.4729 wear properties up
Cr-Alloyed CA-40 to 850 °C
Wrought Titanium-stabilised,
AISI 321
5610 250 Stainless Steel, X6CrNiTi18-10 1.4541 austenitic Cr-Ni steel
Cr-Ni-Ti-Alloyed S32100 for welded assemble
Wrought non-magnetic in
EN 10088-2
5620 262 Stainless Steel,
(1995)
X4CrNi18-10 1.4301 the annealed
Cr-Ni-Alloyed condition
excellent
Wrought
EN 10088-2 ductility and may
5630 263 Stainless Steel,
(1995)
X4CrNiMo17-13-3 1.4436 be readily cold
Cr-Ni-Mo-Alloyed
worked
good creep
Wrought ASTM A 240/ A 240M (2001) strength
5640 253 Stainless Steel, C: 0.05-0.1 % Si: 1.40-2.0% Mn: 0.8% P: <0.0.04%
small amounts of
Cr-Ni-Ce-Alloyed S:<0.03% N:0.14-0.20% Cr: 20.0-22.0% Ni: 10.0-12.0 %
Cerium (Ce)
Wrought non-magnetic in
EN 10095
5650 251 Stainless Steel,
(1999)
X15CrNiSi20-12 1.4828 the annealed
Cr-Ni-Alloyed condition
higher elevated-
Wrought
EN 10095 temperature
5660 252 Stainless Steel, X15CrNiSi25-20 1.4841 strength and scale
Cr-Ni-Alloyed (1999)
resistance
Heat-Resistant
C: 0.30 % Si: 1.50% Mn: 1.0% P: <0.0.04% ferritic at all
5800 341 Cast Steel,
S:<0.04% Cr: 18.0-21.0% Ni: 2.0% temperatures
Cr-Alloyed
FLS جدول تبدیل شماره مواد براساس استاندارد
MAT Old MAT No. Category EN/ ASTM/ BS MATERIAL No. Other Properties
Resist to hot-gases
Cast Stainless and high-boiling-
EN 10213-4
5810 350 Steel,
(1995)
GX5CrNi19-10 1.4308 point liquids at
Cr-Ni-Alloyed temperatures up to
650°C
Resist to hot-gases
Cast Stainless and high-boiling-
EN 10213-4 GX5CrNiMo19-
5820 351 Steel, 1.4408 point liquids at
Cr-Ni-Alloyed (1995) 11-2 temperatures up to
650°C
Heat-Resistant Resistant both to
C: 0.70-0.90 % Si: 1.50-2.0% Mn: 0.6-1.0%
5830 343 Cast Steel,
Cr: 24.0-26.0% Ni: 2.5-3.5%
high temperatures
Cr-Ni-Alloyed and wear
composition
Heat-Resistant balanced very
EN 10295 G-X40CrNiSi 25- carefully to avoid
5840 344 Cast Steel, 1.4837 sigma-phase
Cr-Ni-Alloyed (2002) 12
formation in
600- 900 °C
Heat-Resistant
EN 10295 G-X40 CrNiSi25- Structure:
5850 345 Cast Steel, 1.4848 Austenite, carbides
Cr-Ni-Alloyed (2002) 20