Professional Documents
Culture Documents
Lab Report
Lab Report
Lab Report
Name of prepper:
Lawand Rawf Muhamad
Mhamad omer ali
SUPERVISOR:
Mrs. Zhina & mr toezher
1
Lab report November 2, 2021
Theory :
Theory The use of the piston and weights with the cylinder
generates a measurable reference pressure:
2
Lab report November 2, 2021
Where,
F: Force applied to the liquid in the calibrator cylinder in
N. M: Total mass including the mass of the piston in kg.
A: Cross-sectional area of the piston in m2.
g: Acceleration due to gravity in m/s2.
Equipment Require:
F1-10 Hydraulics Bench.
F1-11 Dead Weight Calibrator.
Weights
Weight balance.
Bourdon pressure gage.
3
Lab report November 2, 2021
Calculation :
4
Lab report November 2, 2021
5
Lab report November 2, 2021
Measurement actual
0.332 0.334
0.445 0.5
0.98 1
Chart Title
100%
90%
80%
70%
60%
50%
40%
30%
20%
10%
0%
measuermrnt actual
6
Lab report November 2, 2021
300
250
200
150
100
50
0.5 1
0
0.5 1 1.5 2 2.5 3 3.5 4 4.5
Discussion :
The analysis of the collected data from calibration of Bourdon
Gauge in this experiment allowed for a sufficient overview of the
calibration measurement. According to analysis the data we
obtained from the Bourdon gauge, I found calibration is important
for meter. In this experiment, the data in my team is not so
accurate. Friction, backlash and The absolute error and the
relative error are higher than expectation. The accuracy is lower
than the standard.