HN System On-Demand Streaming Feature

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

HN System

On-Demand Streaming Feature

Application-based Feature for Voice, Video,


and Latency Sensitive Data Traffic
On-Demand Streaming is a new, performance-enhancing feature call, the HN terminal will automatically detect and provide
of the HN System from Hughes, the leader in broadband satellite additional bandwidth as required. The HN terminal can optionally
networks and services. Included as a standard feature in HN be configured to limit calls on a network or per remote basis. This
software release 5.6 and above, On-Demand Streaming gives allows for efficient bandwidth utilization over the TDMA inbound
operators the option to deliver an enhanced range of high Quality channel while continuing to provide end users with a high-quality
of Service (QoS) offerings by dynamically allocating Constant Bit satellite SIP connection.
Rate (CBR) transport services per application session. On-Demand
Streaming enhances the performance of VoIP and video applications Real-Time Streams
that are based on Session Initiated Protocol (SIP) and H.323 For real-time applications using protocols such as H.323, the On-
standards, as well as latency sensitive data traffic, and is supported Demand Streaming feature allows operators to configure inbound
on all the terminals of the HN7000S family of routers. CBR bandwidth on a per remote basis, as well as on a network
basis. The assignment can be made based on the port range, DSCP
Key Benefits tags or the even IP address, and thus can be used to support a wide
■ Enables high QoS VoIP and video services per site or range of voice and video applications.
groups of sites
■ Enhances performance of latency sensitive applications Low-Latency Data Applications
■ Non-priority applications operate normally in parallel In addition to providing high QoS links for VoIP and video
applications, the On-Demand Streaming feature can also be used
Session Initiated Protocol (SIP) by service operators to improve the performance of latency-sensitive
With the Hughes On-Demand Streaming feature, an HN terminal data applications. Applications such as Citrix® and Remoteware®
can be configured to automatically recognize any incoming or can be assured of a Constant Bit Rate QOS based on ports, which
outgoing VoIP or videoconference call using the SIP and assign a reduces latency over the HN network and thereby improves the end
predefined bandwidth per session. This enables a high-quality, low- user experience.
jitter, low-latency connection for each SIP call. For each additional

SIP Streams
Embedded Low jitter System Requirements
RTP Streams On-Demand No packet loss - HN System software release 5.6
and above
Streaming High-quality - HN NOC CX or LX with Special
Data Streams Feature in-bound audio
Services Gateway
- HN7000S, HN7740S, or HN7700S
HN7000S Family and video remote terminals
of Satellite Routers

HughesNet encompasses all broadband solutions and managed services from HUGHES for large enterprises,
governments, small businesses, and consumers. HughesNet solutions and services are marketed directly by
Hughes and its authorized resellers and distributors throughout North America, Europe, India, and Brazil. In all
other regions of the world, Hughes products and services are available from a growing family of value-added providers and resellers. Hughes
broadband satellite products are based on the IPoS (IP over Satellite) global standard approved by TIA, ETSI,
and ITU.
www.hughes.com
Hughes System / On-Demand Streaming Feature

Maximum Bandwidth
Backlog-based
Increments of bandwidth bandwidth
based on codec or configuration
Latency Sensitive IP Data Stream provided for
IP data
H.323 Video

SIP Call 2

SIP Call 1

No Bandwidth
RESULT
Low jitter
No packet loss
High-quality
bandwidth

On-Demand Streaming Feature Benefits

Embedded software ■ Detects latency-sensitive traffic

SIP streams ■ Recognizes SIP traffic


■ Automatically requests bandwidth based on codec
■ Limits number of SIP calls per remote/network

Other RTP streams


■ Detects traffic based on matching rules
■ Rules based on port range, IP address or DSCP tag
■ Automatically requests bandwidth based on stream configuration
■ Limits number of calls per remote/network

Data streams
■ Detects traffic based on matching rules
■ Rules based on port range, IP address or DSCP tag
■ Limits number of streams per remote/network

For additional information, please contact us at globalsales@hns.com or visit our Website at www.hughes.com.

www.hughes.com
Hughes and HughesNet are registered trademarks of Hughes Network Systems, LLC. VSAT 310-I DEC 07
Other trademarks are the property of their respective owners. H37569 ID
©2007 Hughes Network Systems, LLC. All information is subject to change. All rights reserved.
11717 Exploration Lane Germantown, MD 20876 USA

You might also like