Professional Documents
Culture Documents
MFL85N: Mechanical Seals - Mechanical Seals For Pumps - Metal Bellows Seals
MFL85N: Mechanical Seals - Mechanical Seals For Pumps - Metal Bellows Seals
MFL85N
Mechanical seals | Mechanical seals for pumps | Metal bellows seals
Advantages Materials
• For extreme temperature ranges Seal face: Carbon graphite antimony
• No dynamically loaded O-Ring impregnated (A), Silicon carbide (Q12)
• Self cleaning effect Seat: Silicon carbide (Q1)
• Short installation length possible Bellows: Inconel® 718 hardened (M6),
• Pumping screw for highly viscous media Hastelloy® C-276 (M5)
Metal parts: CrNiMo steel (G), Duplex (G1),
available (dependent on direction of
Hastelloy® C-4 (M)
rotation).
Standards and approvals
Operating range
Shaft diameter: • EN 12756
d1 = 16 … 100 mm (0.63" … 4“) Recommended applications
Externally pressurized:
• Process industry
p1 = … 25 bar (363 PSI)
• Oil and gas industry
Internally pressurized:
• Refining technology
p1 <120 °C (248 °F) 10 bar (145 PSI)
p1 <220 °C (428 °F) 5 bar (72 PSI) • Petrochemical industry
Features Temperature: t = -40 °C … +220 °C • Chemical industry
• For unstepped shafts (-40 °F … 428) °F, • Hot media
• Single seal Stationary seat lock necessary. • Cold media
• Balanced Sliding velocity: vg = 20 m/s (66 ft/s) • Highly viscous media
• Independent of direction of rotation • Pumps
• Metal bellows rotating • Special rotating equipment
eagleburgmann.com All technical specifications are based on extensive tests and our many years of
experience. The diversity of possible applications, however, means that they can serve
info@eagleburgmann.com only as guide values.
We must be notified of the exact conditions of application before we can provide any
guarantee for a specific case. This is subject to change.
03.11.2021 © EagleBurgmann
1
RELY ON EXCELLENCE
Seat alternatives
G16
(l1k shorter than specified by EN 12756)
eagleburgmann.com All technical specifications are based on extensive tests and our many years of
experience. The diversity of possible applications, however, means that they can serve
info@eagleburgmann.com only as guide values.
We must be notified of the exact conditions of application before we can provide any
guarantee for a specific case. This is subject to change.
03.11.2021 © EagleBurgmann
2
RELY ON EXCELLENCE
Product variants
MFL85F MFL90N
Dimensions, items and description as for MFL85N, Shaft diameter:
but with pumping screw (item no. 1.4). Dependent d1 = 20 … 100 mm (0.79" … 4“)
on direction of rotation. The pumping screw can be Internally pressurized:
retrofitted. p1 = … 16 bar (232 PSI),
stationary seat lock necessary.
Externally pressurized:
p1 = 10 bar (145 PSI)
Temperature:
t = -40 °C … +220 °C (-40 °F … +428 °F)
Sliding velocity: vg = 20 m/s (66 ft/s)
MFL85P / MFL90P
Version with pumping ring. Dependent on
direction of rotation. Can be retrofitted.
eagleburgmann.com All technical specifications are based on extensive tests and our many years of
experience. The diversity of possible applications, however, means that they can serve
info@eagleburgmann.com only as guide values.
We must be notified of the exact conditions of application before we can provide any
guarantee for a specific case. This is subject to change.
03.11.2021 © EagleBurgmann
3
RELY ON EXCELLENCE
Dimensions
eagleburgmann.com All technical specifications are based on extensive tests and our many years of
experience. The diversity of possible applications, however, means that they can serve
info@eagleburgmann.com only as guide values.
We must be notified of the exact conditions of application before we can provide any
guarantee for a specific case. This is subject to change.
03.11.2021 © EagleBurgmann
4