Professional Documents
Culture Documents
Baja Saeindia 2022 DVP&R + Dfmea Template
Baja Saeindia 2022 DVP&R + Dfmea Template
10
Note:
1. Each team is expected to perform DVPR for minimum total 10 No's of components/ systems/ vehicle levels compulsorily
2) Performance targets are same as those listed in Design Report for vehicle & aggregates. e.g. Stopping distance after braking.
3) On an average conduce two or three tests/ attemps for each component.
AIR-DVPR_06.03.02
DESIGN VERIFICATION PLAN REPORT Page : 2 of 10
Date:
Team Name:
Faculty Advisor:
AIR-DVPR_06.03.02
Potential
FMEA No.:ASP/AIS/01 __________________
Failure Mode Effects Analysis
( Design FMEA ) Page :_1__________ of 4 ________
Section B. For mBAJA as well as eBaja Teams, (Teams can choose Minimum "5/3" No's of items/subsystems as per their co
1. Suspension System (Suspension Arms, Links, Ball Joints, Springs, Dampers, Suspension Mountings/Brackets)
2. Steering System (Steering Column, Tie Rod Ends, Rack and Pinion Assembly, Steering Wheel and Column UJ
3. Brake System (Braking Performance, Caliper Mounts, Master Cylinder Mount, Brake Rotor)
4. Roll Cage
5.Transmission System (CVT Belt, Driveshaft, Gearbox, CVT Pulleys, Engine Mounting)
6. Upright
7. Tie Rod Ends
8. Wheel Hub
9. Wheel Bearings
10. Pedal Assembly
11.4WD/AWD
For, 1. eBAJA Teams: DFMEA needs to be performed on the Minimum "5" No's of items/subsystems ("2" No's from Se
2. mBAJA Teams: DFMEA needs to be performed on the Minimum "5" No's of items/subsystems ("5" No's from Sectio
bsystems. Also, eBAJA teams need to perform DFMEA on mBAJA items/subsystems as mentioned below
systems ("2" No's from Section A & "3" No's from Section B)
ems ("5" No's from Section B)