Professional Documents
Culture Documents
Control Head For Pneumatic Actuated Process Valves: Type 1066
Control Head For Pneumatic Actuated Process Valves: Type 1066
Control Head For Pneumatic Actuated Process Valves: Type 1066
Decentralized control of
process valves optional with
multipole or bus connection
Minimized tubing
IP 67 rating
Access protection
Design/Function Applications
Rating IP 67
1) *)
Flow rate: Q Nn-value air [l/min] Response times [ms]
Measured at +20°C, 6 bar pressure at valve inlet and Measured at +20°C, 6 bar pressure at valve outlet
1 bar pressure difference Opening pressure rise 0 up to 90%
2)
Pressure ranges [bar] Closing pressure drop 100 up to 10%
Measured as overpressure to the atmospheric pressure
Configurating Possibilities
Initiators (0 up to 2 units)
Position feedback
(Clamp for 1 additional indicator - externally / internally)
Control Head for Pneumatic Actuated Process Valves Type 1066
IMPORTANT! IMPORTANT!
When producing own flanges, Switch indicator preferably made
please request for dimensional of ST37 (nickel plated or zinc
drawings, as you could risk a coated).
non-function of the initiators due Do not use other materials, as it
to insufficient fixing of the head may cause switching errors
especially at heavy vibrations.
Control Head for Pneumatic Actuated Process Valves Type 1066
Dimensions [mm]
Signal-LED
with long distance visibility
Description
In case of special requirements We reserve the right to make technical changes without notice.
please consult for advice. 805-GB/ 3-0160