Professional Documents
Culture Documents
TEX 07PE Pneumatic Pick Hammer: Combining Chisel Control and Vibro-Reduction
TEX 07PE Pneumatic Pick Hammer: Combining Chisel Control and Vibro-Reduction
TEX 07PE Pneumatic Pick Hammer: Combining Chisel Control and Vibro-Reduction
Technical data
Model Tool Weight Air con- Length Impact Tool Part
shank sumption frequency retainer number
mm kg l/s mm blows/min
(in.) (lbs.) (cfm) (in.)
TEX 07PE 19x50 8.7 17 525 1770 Cap 8461 0209 20
(¾x2) (19.2) (35.7) (20 ¾)
TEX 07PE 19x50 9.0 17 525 1770 Cap 8461 0209 21
w. side handle (¾x2) (19.8) (35.7) (20 ¾)
All data at 6 bar (90 PSI) pressure
Optional equipment:
Front side handle kit 0.3 8461 0209 90
(0.6)
The hardest wearing tools on the market
Atlas Copco chisels are probably the hardest wear transfer of energy, as well as less vibration and wear on
ing on the market. They are made from low carbon both hammer and chisel.
steel, which ensures a case-hardened skin without At Atlas Copco we maintain a comprehensive range of
the drawbacks of core brittleness. chisels to ensure that you always have the right tool for
The striking face is end milled. This ensures true the job.
contact between the piston and the tool, better
Tool Description Tip width Working length Body Weight Part no.
Bush hammer 40x40 1 1/2 Z=9 Z=9 0.5 1.1 3083 3226 00
Formalix 2003
Bush hammer 40x40 1 1/2 Z=16 Z=16 0.5 1.1 3083 3227 00
Z = number of TC teeth
Intellecta 2006 07
© 2003, Atlas Copco Construction Tools AB, Stockholm, Sweden.
9800 0445 01
www.atlascopco.com