FDR Smart F Spec ENG

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 30

FDR Smart FGX-S Product Specification

Diagnostic X-ray System

FGX-S Series

FUJIFILM Corporation
26-30, NISHIAZABU 2-CHOME, MINATO-KU, TOKYO
106-8620, JAPAN
http://www.fujifilm.com/products/medical/

DN: RSP1405-001, Rev. A01 FUJIFILM Corporation 1/30


FDR Smart FGX-S Product Specification

1. SPECIFICATION

 X-ray Generators

System Model FDR Smart FDR Smart FDR Smart FDR Smart
FGX-40S FGX-52S FGX-68S FGX-82S
Generator Model GXR-40 GXR-52 GXR-68 GXR-82
Power Rating 40kW 52kW 68kW 82kW
Line Power 230V~, 400V3~, 400V3~, 480V3~
480V3~
±10% (Frequency: 50/60Hz)
kV Range 40~125kV, 1kV step 40~150kV, 1kV step
mA Range 10 to 500mA 10 to 640mA 10 to 800mA 10 to 1,000mA
Timer Range 0.001 to 10 sec, 38 steps
AEC Shortest 1ms
Irradiation Time
mAs Range 0.1 to 500mAs
Max. 500mA@80kV 640mA@81kV 800mA@85kV 1,000mA@82kV
Power Output 400mA@100kV 500mA@104kV 640mA@106kV 800mA@102kV
320mA@125kV 400mA@130kV 500mA@136kV 640mA@128kV
320mA@150kV 400mA@150kV 500mA@150kV

Rotor Supply Low Speed Low Speed Dual Speed


(Option: LSS Brake, (Option: LSS Brake,
Dual Speed for 3Ф) Dual Speed)
Anatomical User programmable max 1,280 programs with APR utility software
Programs (Including Bucky & AEC selection)
Technique 4 point display(kV, mA, Time, mAs)
Selection
Image Receptors 2 Bucky + 1 Non-Bucky
Auxiliary External System 230VAC, 1A, 230W
Power Supply Power 110VAC, 1A, 110W
Magnetic Lock Power 28VDC, 5A, 140W
Collimator Lamp 24VAC, 6.3A, 150W
Power
X-ray Ripple 30kHz
Frequency
Reproducibility Coefficient of Variation: kV < 0.005, Time < 0.005, mAs < 0.01
Accuracy kV < ±(1%+1kV), mA < ±(3%+1mA), Time < ±(1%+0.5ms), mAs < ±(3%+0.1mAs)
Linearity Coefficient of Linearity < 0.01 : CL = (X1-X2)/(X1+X2), where X is mR/mAs
Dimension 622 x 652 x 405mm (W x H x D)
Weight 100kg

DN: RSP1405-001, Rev. A01 FUJIFILM Corporation 2/30


FDR Smart FGX-S Product Specification

 Patient Table

1) 4-way Floating tabletop table

Model PBT-4
Longitudinal 1,000(±500)mm
Tabletop
Movement Transverse(Lateral) 250(±125)mm
350mm with standard tray
Bucky Longitudinal
310mm with rotating tray
Inherent Filtration 1.2mmAl at 100kV
Tabletop Max. Patient Weight 300kg (660lbs)
Size 2,200(W) x 750(D) x 45(H) mm
Bucky Type Fixed Grid type / Oscillating Grid type
Standard tray for CR and Analog cassette
-N : - Tray size: 17”x17” (for 8”x10” to 17”x17” cassette)
- Rotating: Not supported
Tray Type
Rotating tray for DR cassette
-R : - Tray size: 14”x17”(only for 14”x17” cassette)
- Rotating: Center reference
Grid FD 100cm, 103 lpi, ratio 10:1
Lock(Brake) EM Lock, beam sensor on/off
Center indication Buzzer sound and LED
Electrical Rating 100–240Vac, 200VA, 50/60Hz
Dimension / Weight 2,200(W) x 750(D) x 660 mm / 150kg(330lbs)
* APPLIED PART

DN: RSP1405-001, Rev. A01 FUJIFILM Corporation 3/30


FDR Smart FGX-S Product Specification

2) Elevating table

Model PBT-6
Longitudinal 1,000(±500)mm
Tabletop
Transverse(Lateral) 250(±125)mm
Travel 285(565~850)mm,
Movement Vertical Speed 17mm/sec
Motorized movement by Foot Switch
Operating
DC-motor (Linear Actuator)
350mm with standard tray
Bucky Longitudinal
310mm with rotating tray
Inherent Filtration 1.2mmAl at 100kV
Tabletop Max. Patient Weight 300kg(660lbs)
Size 2,200(W) x 810(D) x 45(H) mm
Bucky Type Fixed Grid type / Oscillating Grid type
Standard tray for CR and Analog cassette
-N : - Tray size: 17”x17” (for 8”x10” to 17”x17” cassette)
- Rotating: Not supported
Tray Type
Rotating tray for DR cassette
-R : - Tray size: 14”x17”(only for 14”x17” cassette)
- Rotating: Center reference
Grid FD 100cm, 103 lpi, ratio 10:1
Lock(Brake) EM Lock, Foot Switch on/off
Center indication Transverse center, height center
Side Cover 2-story telescopic Cover
Electrical Rating 100–240Vac, 400VA, 50/60Hz
Dimension / Weight 2200(W) x 810(D) x 850(H) mm / 260kg(573lbs)
* APPLIED PART

DN: RSP1405-001, Rev. A01 FUJIFILM Corporation 4/30


FDR Smart FGX-S Product Specification

 Vertical Wall Stand

Model WBS
Cassette stroke Vertical 1,640mm (420~2,060mm from floor to Bucky center)
Bucky Type Fixed Grid type / Oscillating Grid type
Standard tray for CR and Analog cassette
-N : - Tray size: 17”x17” (for 8”x10” to 17”x17” cassette)
- Rotating: Not supported
Tray Type
Rotating tray for DR cassette
-R : - Tray size: 14”x17”(only for 14”x17” cassette)
- Rotating: Only Top reference
Grid FD 150cm, 103 lpi, ratio 10:1
Inherent Filtration 0.5mmAl at 100kV
Lock(Brake) EM Lock, Switch on/off
Balance Counter Weight
Electrical Rating 24VDC, 1A
Dimension / Weight 2,169(H) x 655(W) x 410(D) mm / 120kg(264lbs)
* APPLIED PART

DN: RSP1405-001, Rev. A01 FUJIFILM Corporation 5/30


FDR Smart FGX-S Product Specification

 Tube stand

1) Floor Mounted
Model TS-FM6
Tube Rotation Angle ±135°
Longitudinal 2,200mm
Tube stroke Lateral 220mm
Vertical 1,580mm (440~2,020mm from floor to focus)
Lock(Brake) EM Lock, Switch on/off
Balance Counter Weight
Column Rotation 90° step
Electrical Rating 24VDC, 3A
Dimension / Weight 2,317(H) x 1,373(D) mm x 3,006(W) / 240kg(529lbs)

2) Floor-Ceiling Mounted
Model TS-FC6
Tube Rotation Angle ±135°
Longitudinal 2,500mm
Tube stroke Lateral 220mm
Vertical 1,580mm (430~2,010mm from floor to focus)
Lock(Brake) EM Lock, Switch on/off
Balance Counter Weight
Column Rotation 90° step
Electrical Rating 24VDC, 3A
Dimension / Weight 2,465(H) x 1,373(D) mm x 3,600(W) / 180kg(397lbs)

DN: RSP1405-001, Rev. A01 FUJIFILM Corporation 6/30


FDR Smart FGX-S Product Specification

 X-ray Tube

Tube Model E7242X E7884X E7252X


Manufacturer TOSHIBA TOSHIBA TOSHIBA
Focal Spot Size 0.6/1.5mm 0.6/1.2mm 0.6/1.2mm
Rating(0.1s) 18/50kW@60Hz 22/54kW@60Hz 27/75kW
Max. Anode HU 200kHU(142kJ) 300kHU(210kJ) 300kHU(210kJ)
Target Angle 14° 12° 12°
Max. kV 125kV 150kV 150kV
Weight 16kg(35.3lbs) 16kg(35.3lbs) 18kg(39.7lbs)
Inherent Filtration 0.9mmAl/75kV 0.9mmAl/75kV 0.9mmAl/75kV
Half Value Layer More than 2.9mmAl eq. at 80kVp
Leakage Radiation Less than 100mR/hr

Tube Model E7255FX E7254FX


Manufacturer TOSHIBA TOSHIBA
Focal Spot Size 0.6/1.2mm 0.6/1.2mm
Rating(0.1s) 40/102kW 40/102kW
Max. Anode HU 300kHU(210kJ) 400kHU(285kJ)
Target Angle 12° 12°
Max. kV 150kV 150kV
Weight 20kg(44.1lbs) 25kg(55.1lbs)
Inherent Filtration 0.8mmAl/75kV 0.8mmAl/75kV
Additional Filtration 0.5mmAl
Half Value Layer More than 2.9mmAl eq. at 80kVp
Leakage Radiation Less than 100mR/hr

* Total filtration including X-ray tube assembly and collimator will be matched by appropriate additional filters to
within the range from 2.9 to 3.3mmAl. eq.

DN: RSP1405-001, Rev. A01 FUJIFILM Corporation 7/30


FDR Smart FGX-S Product Specification

 Collimator
Model / Maker R108
Manufacturer RALCO
Control Manual with 30sec. lamp timer
Field Shape Rectangular
Max. Field Size More than 43x43cm(17x17inch) at 100cm SID
Leakage Radiation Less than 100mR/hr
Max. kVp shield 150kV
Inherent Filtration Min. 2.0mmAl eq.
Luminosity Over 160LUX at 100cm SID (Typ. 250LUX)
Light source Single LED
Standard Tape measure, Rotating flange
Preinstalled Option Laser line
Electrical Rating 20–30VAC, 30VA, 50/60Hz
Dimension / Weight 223(W) x 246(D) x 140(H) mm / 6.6kg(14.6lb)

DN: RSP1405-001, Rev. A01 FUJIFILM Corporation 8/30


FDR Smart FGX-S Product Specification

 AEC Ion Chamber (Option)


Field 3 Fields
X-ray Energy Range 40~150kV
Dose Rate Range 0.2mV/mR~8V/mR
Exposure Dose Range 0.4~600mAs
Inherent Filtration 0.4 mm Al eq.
Weight 2kg (4.4lb)

 Options

- AEC
 Upgrade AEC 3-field ion chamber for table & stand
- DAP
 Upgrade DAP kit, Stand-alone Display type
- Cassette center tracking
 Upgrade table cassette tracking for TS-FM6
- Dual Speed Starter (DSS)
 Up-grade DSS for Dual speed rotating tube under the 3 phase (40/52KW)
- LSS Brake for Low speed rotor supply
- Console stand
- Lateral cassette holder for the table
- Cassette holder for the stand
- Hand holder for the stand
- Overhead handgrip for WBS
- Handgrip for the table
- Patient compression belt for the table

OPERATING
Ambient temperature range 10 °C to 40 °C (50 °F to 104 °F)
Relative humidity range 30% to 75%, non-condensing
Atmospheric pressure range 700 hPa to 1060 hPa
Altitude Limit This product is rated to operate at an altitude ≤3000m

TRANSPORT AND STORAGE


Ambient temperature range -10 °C to 70 °C (14 °F to 158 °F)..
Relative humidity range 10% to 90%, non-condensing.
Atmospheric pressure range 500 hPa to 1060 hPa

DN: RSP1405-001, Rev. A01 FUJIFILM Corporation 9/30


FDR Smart FGX-S Product Specification

2. DIMENSION

Unit: mm

DN: RSP1405-001, Rev. A01 FUJIFILM Corporation 10/30


FDR Smart FGX-S Product Specification

Unit: mm

Floor Mounted Tube Stand (Model: TS-FM6)

DN: RSP1405-001, Rev. A01 FUJIFILM Corporation 11/30


FDR Smart FGX-S Product Specification

Unit: mm

DN: RSP1405-001, Rev. A01 FUJIFILM Corporation 12/30


FDR Smart FGX-S Product Specification

Floor-Ceiling mounted Tube Stand (Model: TS-FC6)

DN: RSP1405-001, Rev. A01 FUJIFILM Corporation 13/30


FDR Smart FGX-S Product Specification

Unit: mm

Patient Table (Model: PBT-4)

DN: RSP1405-001, Rev. A01 FUJIFILM Corporation 14/30


FDR Smart FGX-S Product Specification

Unit: mm

Patient Table (Model: PBT-6)

DN: RSP1405-001, Rev. A01 FUJIFILM Corporation 15/30


FDR Smart FGX-S Product Specification

Unit: mm

Wall Bucky Stand (Model: WBS)

DN: RSP1405-001, Rev. A01 FUJIFILM Corporation 16/30


FDR Smart FGX-S Product Specification

Unit: mm

X-ray Generator (Model: GXR Series)

DN: RSP1405-001, Rev. A01 FUJIFILM Corporation 17/30


FDR Smart FGX-S Product Specification

Unit: mm

X-ray Control Console with Console Stand

Unit: mm

Collimator (Model: R108)

DN: RSP1405-001, Rev. A01 FUJIFILM Corporation 18/30


FDR Smart FGX-S Product Specification

Unit: mm

X-ray Tube Assembly (Model: E7242X, E7884X)

DN: RSP1405-001, Rev. A01 FUJIFILM Corporation 19/30


FDR Smart FGX-S Product Specification

Unit: mm

X-ray Tube Assembly (Model: E7252X)

DN: RSP1405-001, Rev. A01 FUJIFILM Corporation 20/30


FDR Smart FGX-S Product Specification

X-ray Tube Assembly (Model: E7254FX, E7255FX)

* The trunnion ring’s dimension of E7254FX and E7252X is different from others.

DN: RSP1405-001, Rev. A01 FUJIFILM Corporation 21/30


FDR Smart FGX-S Product Specification

Unit: mm

Handgrip at Table

DN: RSP1405-001, Rev. A01 FUJIFILM Corporation 22/30


FDR Smart FGX-S Product Specification

Unit: mm

Hand Holder at Stand

DN: RSP1405-001, Rev. A01 FUJIFILM Corporation 23/30


FDR Smart FGX-S Product Specification

Unit: mm

Overhead Handgrip at Stand

DN: RSP1405-001, Rev. A01 FUJIFILM Corporation 24/30


FDR Smart FGX-S Product Specification

Unit: mm

Lateral Cassette Holder

DN: RSP1405-001, Rev. A01 FUJIFILM Corporation 25/30


FDR Smart FGX-S Product Specification

Unit: mm

Cassette Holder at Stand

DN: RSP1405-001, Rev. A01 FUJIFILM Corporation 26/30


FDR Smart FGX-S Product Specification

Unit: mm

Patient Compression Belt

DN: RSP1405-001, Rev. A01 FUJIFILM Corporation 27/30


FDR Smart FGX-S Product Specification

3. ROOM LAYOUT

With Table (PBT-6 or PBT-4) and Floor mounted Tube Stand (TS-FM6)

DN: RSP1405-001, Rev. A01 FUJIFILM Corporation 28/30


FDR Smart FGX-S Product Specification

With Table (PBT-6 or PBT-4) and Floor-Ceiling mounted Tube Stand (TS-FC6)

DN: RSP1405-001, Rev. A01 FUJIFILM Corporation 29/30


FDR Smart FGX-S Product Specification

26-30, NISHIAZABU
2-CHOME, MINATO-KU, TOKYO, JAPAN
http://www.fujifilm.com/products/medical/

DN: RSP1405-001, Rev. A01 FUJIFILM Corporation 30/30

You might also like