This document summarizes the load analysis and design checks for foundation bolts connecting an SRP skid structure. The bolts are M20 Gr. 8.8 bolts with 2 bolts in total. STAAD analysis determined the tensile force on each bolt is 29 kN with 0 kN shear forces. Design checks show the bolts have sufficient shear capacity of 101.4 kN and tensile capacity of 152.1 kN to resist the loads from the STAAD analysis.
This document summarizes the load analysis and design checks for foundation bolts connecting an SRP skid structure. The bolts are M20 Gr. 8.8 bolts with 2 bolts in total. STAAD analysis determined the tensile force on each bolt is 29 kN with 0 kN shear forces. Design checks show the bolts have sufficient shear capacity of 101.4 kN and tensile capacity of 152.1 kN to resist the loads from the STAAD analysis.
This document summarizes the load analysis and design checks for foundation bolts connecting an SRP skid structure. The bolts are M20 Gr. 8.8 bolts with 2 bolts in total. STAAD analysis determined the tensile force on each bolt is 29 kN with 0 kN shear forces. Design checks show the bolts have sufficient shear capacity of 101.4 kN and tensile capacity of 152.1 kN to resist the loads from the STAAD analysis.
This document summarizes the load analysis and design checks for foundation bolts connecting an SRP skid structure. The bolts are M20 Gr. 8.8 bolts with 2 bolts in total. STAAD analysis determined the tensile force on each bolt is 29 kN with 0 kN shear forces. Design checks show the bolts have sufficient shear capacity of 101.4 kN and tensile capacity of 152.1 kN to resist the loads from the STAAD analysis.
Node No - 639 UNIT Reference Bolt size = M20 Area of bolt, Ab = 169 mm² Tensile force, Fy = 29 KN STAAD analysis Shear force, Fx = 0 KN STAAD analysis Shear force, Fz = 0 KN STAAD analysis Resultant Shear force, V = 0.00 KN Tensile force, T = 29.00 KN No of bolt, n = 2 Material = Gr 8.8 Yield strength, Fy = 640 N/mm² futa = min(fu, 1.9*fy, 125 [ksi]) Sec. D.5.1.2 futa = 800 N/mm² Tensile Strength, Fu = 800 N/mm² Shear Capacity, Vc = n x Φ x Ab x 0.5 x Fu Eq. D-20 Vc = 101.4 KN Utility Ratio = 0.00 HENCE SAFE = V < Vc Tensile Capacity, Tc = n x Φ x Ab x 0.75 x Futa Eq. D-3 Tc = 152.10 KN Utility Ratio = 0.19 HENCE SAFE = T < Tc Combined Ratio V/Vc+T/Tc = 0.19 < 1.4 = HENCE SAFE