Professional Documents
Culture Documents
Vibe Woven Pattern 2 - 27 - 14
Vibe Woven Pattern 2 - 27 - 14
Vibe Woven Pattern 2 - 27 - 14
Quilt image shown above uses Vibe & Marblehead fabrics designed by Ro Gregg for Paintbrush Studio.
1
Woven
General Instructions
Read all instructions before beginning.
All seams are ¼”.
All fabrics shown in the cover quilt are from Paintbrush Studio’s Vibe and Marblehead
collections. Yardage to make a quilt using the same fabrics shown in the cover quilt are
shown below (backing not included in yardage).
120-0361 - 1/2 yard 120-0371 - 1/2 yard 120-0381 - 1/2 yard 120-0391 - 1/2 yard
120-0401 - 1/2 yard 120-0411 - 1 1/4 yards 120-0412 - 1/2 yard 120-0413 - 1/2 yard
120-0431 - 1/2 yard 120-0441 - 1/2 yard 120-43017 - 1 yard 120-43313 - 1/2 yard
2
Woven
Making the Quilt Blocks
• From each of the 11 red fabrics, cut 1 strip • Sew CD to E along the long side. Press
10½” x WOF (width of fabric). toward E.
Cut each strip into 16 rectangles, each
measuring 2 ½”x10 ½” (176 rectangles).
• From black fabric, cut 6 strips 6” x WOF. • Sew AB to CDE. Press toward C.
Cut strips into 36 squares, each
measuring 6” x 6”.
Cut each of the 36 squares in half
diagonally to make 72 triangles.
3
Woven
• Center and sew a black triangle to each Finishing
trimmed corner. Press toward the triangles. • Prepare a 68” x 68” backing. This will give
Trim sides to make a 10 1/2" square block. you plenty of room to align your quilt top.
• Repeat to make 36 blocks. • Fold the binding in half with wrong sides
together. Press. With the raw edges of the
Assembling the Quilt Top binding aligned with the raw edges of the
• Arrange the blocks in 6 rows of 6 blocks,
quilt top, sew the binding to the front of
alternating the orientation as shown in the
the quilt. Wrap the binding around the
diagram below.
back of the quilt and hand stitch it into
Note: Quilt image shown below is to help the quilter
visualize the block assembly and arrangement. It
place, mitering the corners.
might appear there is a white sashing between the
blocks, but this is not the case.
→
→
Tape the two parts of the template together along this line. →