STK4913 |
i E Thick Film Hybrid Integrated Circuit
es 2-CHANNEL SOW MIN AF Power AMP
Sak __CDUAL-SUPPLY) |
Features:
+ Contains the emitter follower circuit fer upgrading.
» Case temperature 125°C is guaranteed, thereby greatly reducing the heat
sink.
+ Pop noise generated at the time of power ON/OFF can be rejected by a muting
cireuit connected externally.
Maximum Ratings at Ta=25°C wnat
Maximum Supply Voltage Vogmax too
Thermal Resistance @jec 1.5 °C/W
Junction Temperature 1 150. %
Operating Case Temperature Te 125 °C
Storage Tempersture Tétg =30 to +125 °C
Available Time for Lead Shorted t, — Yoc=35V,R,=8ohm, 2 seo
PO=50W, £=50HE
Recommended Operating Conditions at Ta=25°C unit
Recomended Supply Voltage sk ty
Load Resistance RL 8 ohm
‘Operating Characteristics at Te=25°C,Voq=*35V, fy =Bohm(non-inductive) ,Rg=600ohm,
VG=A04B, af specified Test Circuit(based on Sample
Application Circuit) min typ max unit
Quiescent Current 35° «70 120 mA
Cutput Power Fo THb=0.02%,f<20Hztoz0kHz 50 W
Tote] Harmonic Distortion THD FosiW,f=20H to 20kiz 0.02 §
Frequency Response fuite 10 te 100k =z
Input Resistance rs 32k obm
Output Noise Voltage Yio Yoot82¥+RE=1Ckohe 1.2nVems
Output Middle-Point Voltage Vy Voc=*82¥ -70 0 470 oaV
(rete)
+ For power supply at the tine of test, use on
& sonstantevotiage power supply unless “Ee Fer
otherwise specified. Ly ao I t
+ For peasurement of the available tive for T ont
Loed shorted and output nose voltage
the speeified transformer power supply Webbs gh atocaake pecs oupiay’
shown right. \(Equivalant te #0200)
+ The Output noise voltage t= represented by
the peak value on rms scale (VYTVM) of
average value indicating type. For AC
power supply, use an AC stabilized power
supply (504s) to eliminate the effect of
Thicker notse 4s AC primary line,
Case Outline 4029
(unitemn)
These specif:
NIGBEI,TS No. 1625=1/3STKAITS.
ro = ‘J
. t
. a
: i
i iPS
i i (Bae)
a q
7” 7
Input Voltage,Ti - mF
:
Wo, 1625-243