Professional Documents
Culture Documents
Resistor E Series - E3, E6, E12, E24, E48, E96 Tables
Resistor E Series - E3, E6, E12, E24, E48, E96 Tables
Resistor E Series - E3, E6, E12, E24, E48, E96 Tables
Tables
- chart and tables of standard resistor values in the E3, E6, E12, E24,
E48, E96 ranges.
Virtually all resistors that are available fall into the standard resistor values that are given in
the table above. Although resistors are specified up to the E96 series, for most applications a
comparatively few number of resistor values is needed. By choosing from E3 or E6 series of
standard resistor values, and not going to some of the higher order series, it can reduce the
stock holding as there is a greater chance the same values may be used elsewhere in a
design. Only where close tolerance types are required should resistors from the E24, or even
E48 or E96 series of standard resistors should be used.