Professional Documents
Culture Documents
Module 7 and 8 Chemistry
Module 7 and 8 Chemistry
Organic Chemistry
CHEMISTRY MODULE 7 – ORGANIC CHEMISTRY
NOMENCLATURE
● investigate the nomenclature of organic chemicals, up to C8, using IUPAC conventions, including
simple methyl and ethyl branched chains, including: (ACSCH127)
– alkanes
– alkenes
– alkynes
– alcohols (primary, secondary and tertiary)
– aldehydes and ketones
– carboxylic acids
– amines and amides
– halogenated organic compounds
● explore and distinguish the different types of structural isomers, including saturated and
unsaturated hydrocarbons, including: (ACSCH035)
– chain isomers
– position isomers
– functional group isomers
HYDROCARBONS
Inquiry question: How can hydrocarbons be classified based on their structure and reactivity?
● construct models, identify the functional group, and write structural and molecular formulae for
homologous series of organic chemical compounds, up to C8 (ACSCH035) :
– alkanes
– alkenes
– alkynes
● conduct an investigation to compare the properties of organic chemical compounds within a
homologous series, and explain these differences in terms of bonding (ACSCH035)
● analyse the shape of molecules formed between carbon atoms when a single, double or triple bond
is formed between them
● explain the properties within and between the homologous series of alkanes with reference to the
intermolecular and intramolecular bonding present
● describe the procedures required to safely handle and dispose of organic substances (ACSCH075)
● examine the environmental, economic and sociocultural implications of obtaining and using
hydrocarbons from the Earth
Inquiry question: What are the products of reactions of hydrocarbons and how do they react?
● investigate, write equations and construct models to represent the reactions of unsaturated
hydrocarbons when added to a range of chemicals, including but not limited to:
ALCOHOLS
Inquiry question: How can alcohols be produced and what are their properties?
Inquiry question: What are the properties of organic acids and bases?
● model and compare the structure, properties and uses of addition polymers of ethylene and related
monomers, for example:
– polyethylene (PE)
– polyvinyl chloride (PVC)
– polystyrene (PS)
– polytetrafluoroethylene (PTFE) (ACSCH136)
● model and compare the structure, properties and uses of condensation polymers, for example:
– nylon
– polyesters
HYDROCARBONS
Hydrocarbons are compounds that contain only carbon and hydrogen. They are the main constituents of natural gas
and crude oil.
Hydrocarbons can be saturated (in hydrogen) or unsaturated, depending on whether they contain just single bonds
or double/triple bonds, respectively.
ALKANES
Alkanes are called saturated hydrocarbons because no more hydrogen atoms can be added to the carbon atoms.
Alkanes are a homologous series: family of compounds that can be represented by one general molecular formula.
BRANCHED ALKANES
Methyl
Ethyl
Propyl
Butyl
Pentyl
1 Meth- 5 Pent-
2 Eth- 6 Hex-
3 Prop- 7 Hept-
4 But- 8 Oct-
1) Find the longest continuous chain of carbon atoms. Assign a parent name based on this number.
2) Find whatever groups that are not part of the longest continuous chain. Name these as prefixes and put
them in alphabetical order.
3) Assign numbers to groups by counting from one end of the chain. A chain has two ends, and the end we
start from is the one that gives the lowest set of numbers to the groups.
eg: 3-methylhexane
2 Di 5 Penta
3 Tri 6 Hexa
4 Tetra 7 Hepta
1) Work out the numbers for the two possible names (going along the longest carbon chain in both directions)
2) List the numbers in each name in increasing order
3) Compare the first number of each name
a. If there is a difference, the name with the lower number is correct
b. If the numbers are the same, move onto the second number and so on until there’s a difference
Carbon atoms with double and triple bonds can accept more hydrogen therefore alkenes and alkynes are
unsaturated hydrocarbons.
The double bond carbon atoms are called functional groups because they are sites of chemical activity.
- A functional group is an atom, or group of atoms, which give a compound some characteristic physical and
chemical properties.
It is necessary to assign a number to describe the location of the double bond. The bonds are numbered much like
carbons. The lowest number is assigned to the bond.
ALKYNES
SHAPE
Bonds around Carbon Angle between Bonds Number of VSEPR groups Shape
around carbon
Hydrocarbon compounds in which the carbon atoms have joined to form closed ring structures are called cyclic (or
alicyclic) hydrocarbons. They may also be saturated or unsaturated:
Due to the extra C-C bond that closes the ring structure, there are always two less hydrogen atoms than the
respective straight chain.
Cyclohexane 3-methylcycloheptene
EXTENSION: AROMATIC HYDROCARBONS
A unique type of cyclic structure is the aromatic hydrocarbons. These structures contain a ring of carbon atoms
linked together such that they have delocalised electrons. Delocalised electrons are not held within bonds but are
free to move around a structure.
Benzene
- The electrons of the double bond are free to move around the entire ring, forming a “cloud” of delocalised
electrons above and below the plane of the ring.
- The delocalisation is shown by drawing a circle around the inside of the ring. This depiction represents the
equivalent nature of the six carbon-carbon bonds.
The delocalisation of the electrons in aromatic compounds gives them significantly different properties to alkenes.
They have much greater stability and are often unreactive.
- A similar structure and the same general formula and functional group (each member of a homologous
series differs by a −𝐶𝐻2 − unit from the previous member)
- A pattern to their physical properties
- Similar chemical properties
The melting and boiling points are measures of the thermal energy required to overcome intermolecular forces.
The packing of molecules also affects the boiling and melting point.
- Packing depends on molecular shape. Molecules that are small, symmetrical or unbranched tend to be able
to pack more closely together. This results in stronger intermolecular forces.
- The effect of packing on intermolecular forces strength is more significant for molecules in solid states
(melting point).
Alkane molecules are nonpolar, the only intermolecular force is dispersion forces. As the length of the carbon chain
increases, the overall force of attraction between molecules also increase. (Dispersion forces is proportional to
molar mass). Because boiling and point is determined by the strength of intermolecular forces, boiling point
increases as alkane chain length increases.
Molecular shapes also influence the strength of dispersion forces. Straight-chained alkanes are able to fit together
more closely and tend to have higher boiling points than their corresponding chain isomers.
Melting point is affected by the strength of the dispersion forces, size and shape of the molecule.
Melting points of hydrocarbons follow the same general patterns as boiling points, with a few exceptions. The
melting points of straight-chain hydrocarbons increase as the number of carbon increases. However, there are
deviations in this trend, relating to whether the molecules have an even or odd number of carbon atoms.
Chains with even numbers of carbon atoms pack slightly more efficiently in the solid state than chains with odd
numbers. The more efficient packing requires more energy to melt the compound resulting in a higher melting
point.
Alkenes and alkynes, like alkanes, are nonpolar hydrocarbons. Their molecules are also nonpolar so the forces of
attraction between them are only weak dispersion forces. Members of these homologous series have relatively low
boiling points similar to those observed for alkanes with the same number of carbon atoms.
- The boiling points of alkenes are slightly lower than alkanes with the same number of carbon atoms.
- Alkynes have higher boiling points than both alkenes and alkanes that have the same number of carbon
atoms. This is due to the increase packing because of its linear shape.
Since alkenes have lower molecular mass compared to alkanes with the same number of carbon atoms, the strength
of the dispersion forces is weaker. Hence the boiling points are lower.
Alkenes, alkynes and haloalkanes follow the similar pattern to alkanes. As the length of the carbon chain increases,
the melting point increases. The alkenes ethene, propene and butene are all gases at room temperature, alkenes
with 5-14 carbons are liquid, and longer-chained molecules are solid.
Alkynes follow the same general trend for melting points seen in alkanes and alkenes. The position of the triple
bond can greatly affect the melting points as the shape of the molecule changes.
The solubility of a substance depends on the strength of the IMF within the solute and within the solvent (cohesive
forces), in comparison to the IMF between the solute and solvent (adhesive forces).
The generalisation is that polar compounds tend to only dissolve well in polar compounds and non-polar
compounds only dissolve in non-polar compounds.
Hydrocarbons are soluble in each other as well as in non-polar organic compounds such as benzene, diethyl ether
and carbon tetrachloride (tetrachloromethane). This is because the cohesive forces within the solvent are also weak
dispersion forces that are similar in strength to the dispersion forces within hydrocarbons.
DENSITY
The density of a substance is a measure of its mas per unit volume. (𝑔/𝑚𝐿 or 𝑔/𝑐𝑚 3)
Alkanes are immiscible with water (cannot mix). When mixed, two layers form and the alkane will float on water.
This occurs as the density of all alkanes < water.
Volatility is the ability of a liquid (or solid) to escape and form a vapour. ↑ BP → ↑ IMF Strength → ↑ Volatility
Volatility is measured by vapour pressure, which is a measure of concentration in the gas phase above the liquid. It
is constant at a constant temperature.
Hydrocarbons are non-polar and hence have dispersion forces as their only intermolecular force. Since the
intermolecular forces are relatively weak, their bonds are easily overcome and hence the BP is relatively low.
Therefore, hydrocarbons will be volatile.
VISCOSITY
Viscosity refers to a substance’s resistance to fluid flow. Liquids with a relatively high resistance to flow have high
viscosity. For a substance to flow, particles must flow over each other. Viscosity depends on:
Viscosity decreases with increasing temperature. At higher temperatures, molecules have greater kinetic energy.
Thus, the molecules move around more which increases the space between molecules. This causes the
intermolecular forces to be weaker and hence viscosity decreases.
A functional group is an atom or group of atoms which give a compound some characteristic physical and chemical
property.
A homologous series is a family of organic compounds with the same general formula or functional groups with
similar chemical properties.
ALCOHOLS (ALKANOLS)
Alcohols are formed when a H atom on a hydrocarbon has been replaced with an -OH group.
For naming:
1) Find longest continuous chain of carbon atoms that contain the functional group. Assign a stem name and
use the suffix “-ol”.
2) Name the substituents as prefixes in alphabetical order.
3) Number the chain so that the functional group at the end of the name gets the lowest possible number.
eg: 2-ethylbutan-1-ol
- A primary (1°) alcohol is one in which the carbon bearing the -OH group is bonded to one other carbon
atom.
- A secondary (2°) alcohol is one in which the carbon bearing the -OH group is bonded to two other carbon
atoms.
- A tertiary (3°) alcohol is one in which the carbon bearing the -OH group is bonded to three other carbon
atoms.
These three types of alcohols have different physical and chemical properties.
A carbonyl functional group consists of carbon attached to an oxygen atom by a double bond.
The difference between aldehydes (alkanals) and ketones (alkanone) is the position of the carbonyl group along the
carbon chain:
- If the carbonyl group is on a terminal carbon (at the end of a chain), it is called an aldehyde, which is given
the suffix “-al”.
- If the carbonyl group is in the middle of the carbon chain, it is called a ketone, which is given the suffix “-
one”.
Aldehyde: Ketone:
- When the ketone is the suffix, the carbon chain is numbered so that the ketone is assigned the lowest
number. (“-one”) eg. Pentan-3-one.
Carboxylic acids contain the carbonyl group, C=O, connected to a hydroxyl group. The carboxyl group is abbreviated
as -COOH, and is given by the suffix “-oic acid”.
- Since the carboxylic acid uses up 3 bonds on the carbon atom, it must be situated at the end of the chain
(terminal carbon).
Amines and amides both contain nitrogen. Amides contain the group. They use the suffix “-amine” or the
prefix “amino-”.
Amides are carboxylic acids where the OH group has been replaced with an amine. They use the suffix “amide”.
When they quoted as the prefix, the carbonyl and the amine are named separately (using the prefixes “oxo” and
“amino” respectively).
Eg. 3-methylpentan-2-amine
Halogenated organic compounds have hydrogen atoms replaced with a halogen (Group 17 element).
The halogen functional groups are named using prefixes placed in front of their name of the alkane:
• Br: bromo
• Cl: chloro
• F: fluoro
• I: iodo
Eg. 1,2-dibromo-3,4-difluoropentan-3-one
The highest priority functional group takes the suffix, and the other functional groups are placed earlier in the name.
Structural isomers are molecules that have the same molecular formula, but their atoms are arranged in different
ways, giving rise to different structural formulae.
Although isomers have the same molecular formula, they are different compounds with different chemical and
physical properties, as well as different names.
CHAIN ISOMERS
Chain isomers involve rearrangement of the carbons in the backbone, resulting in a different number of carbons in
the longest chain or different branching in the carbon chain.
EXAMPLE – HEXANE
An alkane with the molecular formula 𝐶6 𝐻14 has 5 chain isomers. Each isomer has the same molecular formula but
has a different arrangement and a different name.
Hexane
2-methylpentane 3-methylpentane
2,2-dimethylbutane 2,3-dimethylbutane
Position isomers result when molecules have the same carbon chain but the functional group is at a different
location.
Position isomers only exist for molecules that contain functional groups, where the chain is long enough for the
functional group to occupy different positions. (Eg. Not possible for ethene or ethane).
EXAMPLE – BUTENE
But-1-ene But-2-ene
Functional group isomers result when the atoms in the molecules are arrange in different ways that lead to the
isomers having different functional groups.
EXAMPLE
Propanoic acid and 1-hydroxypropan-2-one are functional group isomers as both molecules have the formula
𝐶3 𝐻6 𝑂2 , but propanoic acid contains a carboxyl functional group while 1-hydroxypropan-2-one contains carbonyl
and hydroxyl functional groups.
Two atoms joined by a single bond can rotate freely around the single bond. Geometric isomers can occur when
there is restricted rotation somewhere in the molecule. Restricted rotation can occur about a C=C or a ring.
For complete combustion to occur, excess oxygen must be readily available, and the products are always carbon
dioxide and water.
25
𝐶8 𝐻18(𝑙) + 𝑂 → 8𝐶𝑂2(𝑔) + 9𝐻2 𝑂(𝑙)
2 2(𝑔)
Incomplete combustion occurs when there is insufficient oxygen. The products are water and three different
oxidations of carbon, soot, carbon monoxide and carbon dioxide.
Incomplete combustion results in less energy being produce per mole of fuel combustion, making it less efficient.
This is due to the reduction of C=O bonds being formed. The formation of C=O releases a large amount of energy.
Alkenes and alkynes tend to burn with a more sooty flame compared to alkanes due to the higher percentage of
carbon atoms. Some of the carbon may not combine with oxygen.
The bond energies dictate the overall reactivity of hydrocarbon compounds. Subsequent carbon-carbon bonds in a
multiple bond are less stable and weaker than the original single covalent bond.
- This means that double and triple bonds are highly reactive and can break open more easily and allow
atoms to join (saturate).
- This makes the alkenes and alkynes highly reactive compared to alkanes.
- Alkenes and alkynes are able to react with a number of chemical reactions called addition reactions.
HYDROGENATION
Alkenes react with hydrogen gas in the presence of a metal catalyst to form a saturated alkane.
𝑁𝑖
𝐴𝑙𝑘𝑒𝑛𝑒 + 𝐻2(𝑔) → 𝑆𝑎𝑡𝑢𝑟𝑎𝑡𝑒𝑑 𝐴𝑙𝑘𝑎𝑛𝑒
Bromine adds to almost all alkenes very rapidly at RTP to give a compound that has two bromines on adjacent
carbons. The reaction occurs spontaneously at RTP.
ADDITION OF HX (HYDROHALOGENATION)
Any of the hydrogen halides (HF, HCl, HBr and HI) can add to the double bond of an alkane to give the corresponding
alkyl halide. The double bond is converted into a single bond.
When an asymmetric reagent, such as HBr is added to an asymmetric alkene, more of one isomer is produced than
the other.
- The predominant isomer is called the major product and the other isomer(s) is called the minor product(s).
- In some reactions, only the major product will be formed.
The major product obtained from an addition reaction can be predicted using Markovnikov’s rule.
In addition reactions involving unsymmetrical alkenes, the hydrogen atom will predominantly bond to the carbon
atom bearing the greater number of hydrogen atoms.
Water alone does not react with alkenes, but if an aqueous acid catalyst (eg. Dilute H 2SO4) is added and the mixture
is heated, water adds to the C=C double bond to give an alkanol.
- One of the three bonds in the triple bond is broken, and two new bonds form. The original triple bond is
converted into a double bond.
- The second addition reaction can be stopped by controlling equivalents of reagent used or by using a
specialised reagent.
- Alkynes do not react with water with only an acid catalyst. A mercury(II) catalyst, such as mercury(II) sulfate,
must also be present.
- A carbonyl (ketone or aldehyde) is produced instead of an alcohol. The alcohol forms as an intermediate
which quickly rearranges to form the carbonyl.
A substitution reaction occurs when an atom or functional group in a molecule is replaced or substituted by another
atom or group.
Alkanes are far less reactive than alkanes and alkynes as C-C single bonds are relatively strong. However, their
hydrogen atoms can be substituted by halogens. These reactions do not occur spontaneously at RTP.
Substitution of alkanes can only be carried out with chlorine and bromine (fluorine reacts too explosively, and iodine
does not react) and required energy in the form of ultraviolet (UV) radiation.
OUTCOME
● describe the procedures required to safely handle and dispose of organic substances (ACSCH075)
All organic waste should be discarded into appropriately labelled waste containers.
Alcohols contain a highly electronegative oxygen atom. This creates a polar bond in the molecule.
- The hydrocarbon chain of the alcohol is non-polar (alkyl chain) and can form dispersion forces. It is
hydrophobic (repelled from water).
- The -OH functional group is polar and can form hydrogen bonds, dipole-dipole and ion-dipole bonds. It is
hydrophilic (attracted to water).
As the chain length of an alcohol increases, the strength of the dispersion force increases. However, the extent of
hydrogen bonding does not change.
- The strength of the hydrogen bonding depends primarily on the molecule’s shape and the number of
hydrogen bond donors and acceptors available.
Thus the length of the hydrocarbon chain influences the properties within the homologous series of alcohols, and
the hydroxyl group influences the differences in properties between alcohols and other homologous series.
Alkanol Molecular Mass (g/mol) Melting Point (℃) Boiling Point (℃)
Tertiary 2-methylpropan-2-ol 82
Secondary and tertiary alcohols have lower boiling points than primary alcohols with the same number of carbon
atoms.
- Since the three alcohols are isomers, their dispersion forces will be the same.
- However, the hydrogen bonding is weaker in secondary and tertiary alcohols. The alkyl group adjacent to
the OH group hinders the OH groups from getting closer together, restricting their ability to form strong
hydrogen bonds.
- Hence the lower boiling points arise from weaker hydrogen bonding in secondary and tertiary alcohols.
- Hydrogen bonding allows the alkanols to have a higher boiling point than similar molecular mass alkanes.
SOLUBILITY IN WATER
Methanol Miscible
Ethanol Miscible
Propan-1-ol Miscible
Butan-1-ol 7.9
Pentan-1-ol 2.3
Hexan-1-ol 0.59
Small alcohols dissolve well in water. However, solubility in water decreases with increasing carbon chain length.
The solubility of alcohols in water is dictated by size because the opposing effects of the polar and non-polar
portions of the molecule.
- The polar hydroxyl group is hydrophilic (“water loving”) and the non-polar hydrocarbon chain is
hydrophobic (“water-hating”)
- The -OH group can form hydrogen bonds with water, allowing solvation of this portion of the molecule.
- However, to solvate the large non-polar carbon chain, many strong hydrogen bonds between water
molecules need to be broken. Since the alkyl chain has no strong attraction to water, these cohesive
hydrogen bonds cannot be broken.
- Thus, the alkyl end remains unsolvated, and solubility in water is drastically decreased.
A very general rule for solubility in water, if it has less than a 4:1 carbon : oxygen ratio, it is soluble.
Small alcohols are good solvents for dissolving both polar and non-polar substances due to the presence of both
polar and non-polar areas in the molecule.
- The polar hydroxyl group can form polar interactions such as ion-dipole, hydrogen bonding and dipole-
dipole forces with other polar and ionic substances
- The non-polar hydrocarbon chain can form dispersion forces with other non-polar substances.
Alcohols become more soluble in non-polar organic solvents such as hexane, benzene and toluene, as the length of
the carbon chain increases.
- The large alkyl chain can form strong dispersion forces with other non-polar substances. These are strong
enough to disrupt hydrogen bonds holding the alcohol together.
- Therefore, the alcohol molecules separate and disperse throughout the solvent.
DEHYDRATION
When alcohols are heated with concentrated sulfuric or phosphoric acid as a catalyst, an OH and a H atom on the
adjacent carbon will be eliminated from the alcohol to give an alkene and water.
The reactivity and rate of reaction varies depending on the type of alcohol.
- Tertiary alcohols are the most reactive and always react the fastest. Dehydration occurs readily at room
temperature.
- Primary and secondary alcohols require higher temperatures. Primary alcohols are less reactive and react
slower than secondary alcohols.
Alcohols undergo substitution in the presence of a hydrogen halide (HCl, HBr, HI) to give the corresponding alkyl
halide and water.
OXIDATION
Alcohols can be oxidised with strong oxidising agents, such as acidified solutions of permanganate (MnO4-) or
dichromate (Cr2O72-) to give carbonyl compounds. A change in oxidation states can be seen for the carbon atoms.
- The oxidation of alcohols is driven by a simultaneous reduction reaction, usually of inorganic reagents.
Either acidified permanganate (MnO4- purple in colour) or dichromate (Cr2O72- orange in colour) can be used
as the oxidant.
- The oxidation occurs stepwise: the alcohol is first oxidised to the aldehyde, which is then oxidised into the
carboxylic acid.
Aldehydes are very reactive and the second oxidation generally occurs too rapidly for it to be separated practically.
- Either acidified permanganate (MnO4- purple in colour) or dichromate (Cr2O72- orange in colour) can be used
as the oxidant.
- Since there are no hydrogen atoms attached to the ketone carbon, no further oxidation can occur.
- Secondary alcohols are generally less reactive than primary alcohols, thus require higher temperatures and
longer reaction times to be oxidised.
Tertiary alcohols cannot be oxidised to give any carbonyl compound. The carbon bearing the hydroxyl group has no
hydrogen atoms, thus it cannot be oxidised.
COMBUSTION
Alcohols can readily combust in the same manner as hydrocarbons. They can undergo complete and incomplete
combustion.
Alcohols are good fuels as the combustion of alcohol is highly exothermic and since they are already oxygenated,
they are more prone to complete combustion.
Water alone does not react with alkenes, but if an aqueous acid catalyst (eg. Dilute H 2SO4) is added and the mixture
is heated, water adds to the C=C double bond to give an alkanol.
PRODUCTION BY SUBSTITUTION
This reaction occurs by heating the haloalkane with a solution of sodium hydroxide or potassium hydroxide. The
hydroxide ion from the aqueous base replaces the halogen atom to generate an alcohol and halide salt.
X: Cl, Br, I. Fluoroalkanes will not react as the C-F bond requires too much energy to break.
This reaction occurs due to the highly polarised carbon-halogen bond, which produces a partial positive charge on
the carbon atom.
- The partially positive carbon atom can be easily “attacked” by a negatively charged hydroxide ion.
- This results in the formation of a covalent carbon-oxygen bond. In the process, the negative charge is
donated to the electronegative halogen atom, which leaves as a halide ion.
The rate of this reaction is dependent on the type of haloalkane and the halogen atom that leaves the molecule.
- Haloalkanes can be categorised as primary, secondary and tertiary. The reactivity is highest for primary,
followed by secondary and then tertiary.
- This is because the presence of alkyl groups greatly hinders the ability of the hydroxide ion to approach the
partially positive carbon and thus slows the reaction.
C-F 485
C-Cl 338
C-Br 276
C-I 238
- The lower the bond energy, the easier it is to break the bond.
It is also possible for haloalkanes to undergo substitution reactions with water to form alcohols. This reaction occurs
much more slowly, and the reactivity is highest for tertiary.
PRODUCTION BY FERMENTATION
Fermentation is a process that involves the conversion of carbohydrates into simple alcohols by the action of
enzymes. This is a natural process used by microorganisms to extract energy.
Carbohydrates have the molecular formula of: 𝐶𝑥 (𝐻2 𝑂)𝑦 . Carbohydrates are abundant in plant material. They are
also called saccharides.
- The simplest carbohydrates are monosaccharides. They are the building blocks of more complex
carbohydrates, such as disaccharides like sucrose and polysaccharides like cellulose.
The fermentation of monosaccharides, such as glucose and fructose is the simplest form of fermentation which
process ethanol and carbon dioxide.
The primary source of hydrocarbons is from petroleum. Petroleum is a mixture of hundreds and thousands of
different alkanes, ranging from methane up to alkanes with 40 or more carbons.
- The mixture of gases found in petroleum is called natural gas and the mixture of liquid components is called
crude oil.
- Petroleum is found within pores of rocks deep in the ground.
The complex mixture is separated into fractions according to their boiling points using fractional distillation.
- The petroleum is heated to about 400℃ to produce hot liquid/vapour mixture that enters the fractioning
tower.
- Inside the tower are horizontal trays, each which contains many bubble caps upon which alkanes condense
- Fractions which have lower boiling points will rise higher in the column before condensing. Fraction which
have higher boiling points will not rise as high and will condense towards the bottom of the column.
Some of the longer alkanes are further processed through cracking, which involves heating alkanes to high
temperatures in the absence of oxygen. This causes them to split and form shorter, more useful alkanes as well as
alkenes.
- A zeolite catalyst, which consists of Al, Si and O, may be employed to allow this reaction to be carried at
lower temperatures.
USES OF HYDROCARBONS
The major use of petroleum is transport. Hydrocarbons are excellent fuels and the combustion of hydrocarbons is
the primary source of energy production globally.
Unsaturated hydrocarbons are highly reactive and can undergo addition reactions. This makes them extremely
important as raw materials for the production of other organic chemicals, such as haloalkanes and alcohols, and
commercially valuable goods such as plastic.
Petroleum deposits in the ground are formed by the burial and decomposition of prehistoric living organisms over
millions of years. Thus, petroleum is a finite and non-renewable resource.
As the world’s crude oil diminishes, there will be enormous negative economic and sociocultural consequences.
Such as the instability of world markets and increase costs of goods.
Another huge problem that arises is that the combustion of petroleum releases huge amounts of carbon dioxide
into the atmosphere.
- Carbon dioxide is a greenhouse gas, so it absorbs infrared radiation from the atmosphere and keeps our
Earth warm.
- The extra carbon dioxide produces through combustion is a major contributor to the enhanced greenhouse
effect which causes global warming.
- The consequences for global warming include rising sea levels which in the long term will result in land loss
and flooding, more frequent and intense extreme weather events, warming of the oceans and disruptions
to the feeding behaviour of wildlife.
The higher concentrations of carbon dioxide has also resulted in the acidifications of oceans which is threatening the
survival of aquatic life.
A possible solution to the reliance on non-renewable crude oil is to use biofuels. Biofuels are fuels derived from
biomass, which is biological material from living or recently living organisms such as wood, crops, wet waste and
animal waste.
BIOETHANOL
Bioethanol is ethanol produced from the fermentation of monosaccharides such as glucose and fructose.
Monosaccharides are the building blocks of more complex carbohydrates which make up plant material. Thus
monosaccharides can be sourced from:
Fermentation usually involves mashing up grains, sugarcanes or fruits with water to create an aqueous solution of
sugar to which yeast is added.
- Sucrose (𝐶11 𝐻22 𝑂11 ) and starch are readily hydrolysed into monosaccharides during the fermentation
process as yeast contains the necessary enzymes required to catalyse the breakdown.
- Hydrolysis: 𝐶11 𝐻22 𝑂11(𝑎𝑞) + 𝐻2 𝑂(𝑙) → 2𝐶6 𝐻12 𝑂6(𝑎𝑞)
𝑦𝑒𝑎𝑠𝑡
- Fermentation: 𝐶6 𝐻12 𝑂6(𝑎𝑞) → 2𝐶2 𝐻5 𝑂𝐻(𝑎𝑞) + 2𝐶𝑂2(𝑔)
- Cellulose is difficult to break down to its component sugars as the enzyme cellulase is not readily available
for industrial use.
Bioethanol has been developed as a substitute for petroleum-based ethanol and as an alternative to petrol. It has
the potential to be used as standalone fuel to completely replace petrol but is usually used as an additive to petrol.
- In Australia, most cars post-1986 can use up to 10% ethanol (E10 fuel).
BIOGAS
Biogas consists of mixtures of gases, such as methane, carbon monoxide and hydrogen, released from the natural
breakdown of organic matter by anaerobic bacteria.
- The organic matter is sourced from natural wastes from agriculture and households, such as manure,
human sewage, food processing wastes and crop wastes.
- To produce biogas, the waste is placed in a large enclosed tank, called the digester, containing anaerobic
bacteria. The gas released from the decay is collected by gas outlets.
The biogas collected can be combusted as a fuel to generate electricity or to heat boilers from industrial processes
and for cooking and heating water in homes.
The use of biogas also helps reduce the enhanced greenhouse effect as methane is a greenhouse gas that has a
larger effect than carbon dioxide. By collecting it and using it to produce electricity, less is released into the
atmosphere. Another environmental benefit is that bioethanol and biodiesel are cleaner fuels than petroleum fuels.
- They are oxygenated, so complete combustion is more likely to occur and they do not contain sulfur
impurities.
- They are non-toxic and biodegradable, thus do not pose as severe a threat to the environment in the event
of a spill.
- Bioethanol is made from sugar cane molasses (waste) and waste from starch and red sorghum production.
- Biogas is generated from the treatment of waste water
- Biodiesel is produced from waste vegetable oil from restaurants and industrial food producers
However, this only produces a small percentage of Australia’s fuel needs. It is not possible to manufacture enough
biofuel from these sources to replace all petroleum fuels used today.
The potential of biofuels lies in making it financially viable compared to conventional petroleum-based fuels.
Organic acids are acids that have a carbon-based structure. The most common type of carboxylic acids are alkanoic
acids. They occur abundantly in nature.
All carboxylic acids are weak acids thus they will partially ionise in water to produce hydrogen or hydronium ions.
Different carboxylic acids will have different strengths, ionising to different extents. Their strengths can be compared
by comparing their acid dissociation constant Ka.
- Substituting a highly electronegative atom, such as a halogen, onto the hydrocarbon chain increases the
strength of the acid. The strong electron-withdrawing power of the substituent helps weaken the oxygen-
hydrogen bond. This makes it easier for the hydrogen to be dissociated.
- As the number of electronegative atoms increases, so does the strength of the acid.
- Fluorine has the biggest electron-withdrawing effect, then chlorine, bromine and iodine.
Organic bases are organic compounds that are characterised by the presence of an atom with a lone pair of
electrons that can accept an H+.
- Nitrogen containing compounds such as amines are the most common organic bases.
Many amine bases exist in nature. The most important being the four nitrogenous DNA bases: adenine, cytosine,
guanine and thymine, and the 20 natural amino acids used to make proteins in living organisms.
Amines act as a base in an analogous manner to ammonia. The lone pair of electrons on the nitrogen can accept a
proton, forming an ammonium ion. Like ammonia, they are weak bases.
The base dissociation constant Kb can be used to compare the strength of different amine bases.
Base Formula Kb
Alkyl groups are capable of donating electron density. This results in a build-up of partial negative charge on the
electronegative nitrogen atom, allowing it to pick up H+ more readily and also stabilise the positive charge on the
ammonium ion. The longer the chain, the greater the electron density donate.
- Amides are neutral compounds. The presence of the highly electronegative oxygen atom in the C=O group
pulls electron density away from the nitrogen atom, which makes it more difficult to accept a H + and
stabilise a positive charge if nitrogen was to accept it.
When carboxylic acids react with amines, the product formed will depend on the conditions. At low temperatures, a
proton transfer (neutralisation reaction) proceeds between the carboxylic acid and amine, forming a carboxylate ion
(acid) and an alkyl (base).
At higher temperatures or in the presence of a suitable catalyst, an amide is produced with the elimination of water
(condemnation reaction), which forms the OH group on the acid and a hydrogen from the amine.
- Condensation reaction: Where two or more molecules combine to form a larger molecule with the
simultaneous elimination of a small molecule such as water or methanol.
Carboxylic acids, amines and amides are all polar molecules. They can form hydrogen bonds with other molecules.
Amides do not exhibit a linear relationship between boiling point and molecular weight. This is because the hydrogen
bonding exhibited by the amides is extensive and are more complex.
Amides exhibit the highest boiling points compared to carboxylic acids and amines. Carboxylic acids have higher
boiling points than amines.
- Carboxylic acids and amines have less atoms that can form hydrogen bonds. Each carboxylic acid molecule
can form two hydrogen bonds with another acid molecule through the double bonded oxygen and OH group,
forming a dimer (existing in pairs).
- Each amine molecule can only form one hydrogen bond with another amine molecule.
- Primary amines have the highest boiling points, followed by secondary and then tertiary amines. The same
trend occurs with amides.
SOLUBILITY
Small amines, amides and carboxylic acids dissolve completely in water. However, solubility decreases as the
hydrocarbon chain increases.
- ↑ Carbon chain length → ↑ Non-polar nature of compound → ↑ Dispersion forces domination → Water
cannot solvate the long hydrocarbon chain due to cohesive bonds → ↓ Solubility
Similar to alcohols, the trend is reversed for their solubility in organic solvents.
Esters are formed from the reaction of a carboxylic acid and an alcohol. The OH group on the acid is replaced with
an OR group from the alcohol. This reaction is called esterification (a condensation reaction).
The reaction is extremely slow. Concentrated H2SO4 (dehydrating agent) is used to remove the water and catalyse
the reaction.
[𝐻 𝑂][𝑒𝑠𝑡𝑒𝑟]
Because it is all liquids, it has a equilibrium constant: 𝐾𝑒𝑞 = [𝑎𝑙𝑘𝑎𝑛𝑜𝑖𝑐2
𝑎𝑐𝑖𝑑][𝑎𝑙𝑘𝑎𝑛𝑜𝑙]
Esters are everywhere in nature and are used in a number of industrial applications.
- Short chain esters are known for their distinctive, fruit like odours and many occur naturally in fruits and the
essential oils for plants.
- Due to their pleasant odours, they are commonly used as flavouring (banana lollies) agents in processed
foods, as well as fragrances in perfumes and cosmetics.
- Fats and oils are also naturally occurring triesters derived from glycerol and fatty acids.
1) The alkanol is changed to “alkyl” and is the first word of the esters name
2) The alkanoic acid becomes the alkanoate and is the second word of the esters name
ESTERIFICATION
- ↑ Temperature
- ↑ Acid catalyst
To increase yield:
- Remove water
- Concentrated H2SO4 (catalyst and dehydrating agent)
REFLUX
Reflux is a technique that involves heating a reaction mixture in a vessel fitted with a cooling condenser so that the
volatile reactants and products are returned to the reaction mixture without any loss.
Component Purpose
Condenser Prevents the volatile reactant or product from escaping before the reaction has reached
equilibrium by cooling the reactant vapour into a liquid. Water enters at the base and leaves
from the top
Boiling chips To provide a surface upon which bubbles form, promoting even boiling
Soaps are surfactants which, when dissolve in water, help to remove dirt, oil and foreign matter from surfaces.
- Fatty acids are carboxylic acids with long hydrocarbon chains (10+)
- The salt of a fatty acid consists of a negatively charged carboxylate ion (called the head) with a long
hydrocarbon chain (called the tail) and a positively charged ion.
In water the sodium or potassium ions float free and do not play a part in the cleaning actions of soaps. It is the
negatively charged fatty acid ion which is responsible for the cleaning action.
- The charged head is hydrophilic (water loving) due to its polar nature
- The tail is hydrophobic (water hating) due to its non-polar nature
SAPONIFICATION
Soaps are produced from the hydrolysis of fats and oils (lipids) in a basic solution such as NaOH.
- This reaction is known as saponification. It is a type of hydrolysis reaction, involving the breaking of a
chemical bond by the addition of water
- This means it functions by reducing the surface tension of water and binding to grease and dirt to emulsifies
them.
The hydrophobic part of the soap molecule is long, non-polar hydrocarbon chain. It is strongly repelled by water
molecules.
When soap molecules are added into water, they form an oriented monolayer (with tails sticking out of the water)
at the surface in order to satisfy the interaction of both the hydrophobic and hydrophilic portions of the soap
molecule. This effectively breaks the hydrogen bonding between molecules of water and thus reduces the surface
tension of water.
The components self-assemble into the most stable arrangement, which consists of spherical structures with the
carboxylate groups forming a negatively-charged spherical surface, with the hydrocarbon chains inside the core of
the sphere.
Soap molecules must be first dissolve in water. The hydrophilic head of a soap ion interacts with water molecules via
ion-dipole interactions and hydrogen bonding.
2. ADSORPTION
- The hydrophobic tails of the soap ions dissolve in the grease due to dispersion forces and orientates
themselves.
Surfactant molecules continue to absorb into the grease, decreasing the surface tension of water at the interface
between the grease and water.
The hydrophilic heads interacting with water via ion-dipole forces effectively pull the grease off the surface.
3. EMULSIFICATION
With agitation, the grease layer breaks into smaller, spherical droplets (micelles), with the hydrophilic surfactant
head groups interacting with the water via ion-dipole forces, and the hydrophobic surfactant tails adsorbed into the
grease. This forms a dispersion of grease droplets in water (an emulsion).
The negative charged heads on the soap repel each other, preventing the grease and dirt from joining together and
keeping them dispersed throughout the solution. Therefore, the grease and oil can be simply rinsed away, leaving a
clean surface.
𝐶𝐻3 (𝐶𝐻2 )16 𝐶𝑂𝑂− 𝑁𝑎+ (𝑎𝑞) + 𝐻𝐶𝑙(𝑎𝑞) → 𝐶𝐻3 (𝐶𝐻2 )16 𝐶𝑂𝑂𝐻 (𝑠) + 𝑁𝑎𝐶𝑙(𝑎𝑞)
Soluble fatty acid ion + acid → Insoluble fatty acid molecule + ionic salt
- Soaps can also form insoluble salts (scum) in hard water (water with high concentration of divalent metal
ions such as Ca2+ and Mg2+)
2𝐶𝐻3 (𝐶𝐻2 )16 𝐶𝑂𝑂− 𝑁𝑎 + (𝑎𝑞) + 𝑀𝑔2+ (𝑎𝑞) → [𝐶𝐻3 (𝐶𝐻2 )16 𝐶𝑂𝑂− ]2 𝑀𝑔 2+ (𝑠) + 2𝑁𝑎+ (𝑎𝑞)
Soluble fatty acid ion + divalent metal ion → insoluble salt + sodium or potassium ion
SYNTHETIC DETERGENTS
ANIONIC DETERGENTS
Anionic detergents don’t form insoluble precipitates. They form salts that are all soluble. However, the
effectiveness is still reduced in hard and acidic water. The positive ions in hard water/acidic water will attract the
negative head of the detergent.
CATIONIC DETERGENTS
All cationic detergents have a positively charged polar head. The positive head is usually a quaternary ammonium
ion. They are also known as fatty amine salts.
Generally cationic detergents are not very good cleaning agents due to the strong attraction of cationic detergents
to negatively charged surfaces. (Most surfaces are negatively charged).
- Many fabrics acquired acquire a negative charge when they become wet.
- Cationic detergents are used in fabric softeners and hair conditioners.
The strong attraction of cationic detergents to negatively charged surfaces can be detrimental in other situations.
- Cationic detergents are particularly toxic to microorganisms. They are attracted to the negative surface of
bacteria and damage or kill bacteria that are involved in their decomposition. They therefore have very low
biodegradability.
All non-ionic detergents have uncharged polar heads. The polar heads consists of polar groups such as ethoxylates.
Although these surfactants are uncharged, the polar head groups are still attracted to the highly polar water
molecules forming numerous hydrogen bonds.
Non-ionic detergents don’t foam as much as other detergents. Hence, they can be used in dish washers.
Detergents are synthetic, whereas soaps are made from naturally occurring biological materials (fats and oils). Thus
detergents are less biodegradable.
- The enhanced stability of detergents means they persist in the environment, causing damage to the mucus
membrane in wildlife and resulting in excessive frothing in the water ways. This leads to less sunlight
penetration.
- Toxic to aquatic life.
Anionic detergents often contain builders such as sodium triphosphate (𝑁𝑎5 𝑃3 𝑂10).
- The builders react with minerals in hard water and form soluble molecules.
- High levels of phosphates entering the rivers and waterways can lead to eutrophication (turning a lake into
swamp, algae etc)
A polymer is a long chain molecule made up of repeating units, called monomers joined by covalent bonds. The
process of linking monomer units is called polymerisation.
- Natural polymers are made by living organisms. Eg. Hair, starch, cellulose, DNA and silk
- Synthetic polymers are manufactured. Eg. Plastics like polyethylene, polyvinyl chloride and nylon.
ADDITIONAL POLYMERS
Addition polymers are polymers made by adding unsaturated molecules to each other, without the elimination of
any atoms.
- Additional polymerisation is a type of addition reaction, in which one of the bonds in the C=C double bond is
broken to form two new single bonds.
A simple way of representing polymers is by writing the repeat units in square brackets followed by the subscript n
where n is the number of monomer units in the polymer.
CONDENSATION POLYMERS
Condensation polymers are polymers formed through the condensation reaction of difunctional monomers with
the elimination of a small molecule such as water or methanol in the process.
- Polysaccharides such as cellulose and starch are condensation polymers made from glucose monomers.
POLYESTERS
Polyesters are condensation polymers in which the repeating units are joined by ester links.
Polyamides are condensation polymers in which the repeating units are joined by amide links.
The nylon class refers to polyamides that have linear carbon chains in the repeating units.
PROPERTIES OF POLYMERS
Physical properties of polymers are important in determining their uses. These include:
This is due to the chemical structure of the polymers which leads to different strengths of intermolecular forces that
is dependent on:
CHAIN LENGTH
Polymers are extremely large covalent molecules. The dominant intermolecular force is dispersion.
The length of a polymer (and its molecular weight) depends on the number of monomers the polymer contains. The
melting point, rigidity and hardness of a polymer increases with an increase in chain length.
CHAIN BRANCHING
Polymers are able to form branched and unbranched chains. Unbranched chains are able to pack more closely in an
orderly fashion, forming a rigid crystalline solid.
If the polymer chains have few branches, as in the case with HDPE, the molecules can sometimes line up in a regular
arrangement, creating crystalline regions. The regular arrangements brings the polymer chains closer together. The
IMF between closely packed chains are stronger, and the presence of crystalline regions strengthens the material
overall.
Crystalline regions in a polymer prevents the transmission of light through the material, making it appear cloudy or
opaque.
Amorphous region will form where the polymer chains are randomly tangled and unable to pack very closely. In
some polymer materials, the entire solid is amorphous. Amorphous polymers are usually more flexible and weaker
and are often transparent. (LDPE) Increasing the percentage crystallinity of a material makes it stronger and less
flexible. This also makes the material less transparent because crystalline regions scatter light. There are more
crystalline regions in unbranched polymers
SIDE GROUPS
Side groups can be introduced to make a material more rigid and brittle. This results in a harder polymer.
CROSS-LINKING
Polymer chains are held together by intermolecular forces or they can be linked by covalent bonds called cross-links
to form a large extended network.
Polymers with cross-links are called thermosetting polymers. Since covalent bonds are very string, cross links limit
movement between polymer chains, making the polymer more rigid, hard and heat resistant. These polymers
cannot be remoulded (like XLDPE).
Polyethylene (polyethene) is the most popular plastic in the world. It has a very simple structure.
Ethene is an unsaturated molecule because a double carbon-carbon bond. When ethene polymerases, the double
bond breaks and new covalent bond are formed between carbon atoms on nearby monomers. The polyethene
formed does not contain any double bonds.
Ethene is one of the most simple and versatile monomers. It is easily able to undergo addition polymerisation
LDPE is produced under high temperatures and pressures. Under these harsh conditions, the polymer is formed too
rapidly for the molecules to be neat and symmetrical. The products usually contain too many small chains (branches)
that divide off the main polymer.
The molecules in the polymer cannot pack closely together thus reducing the dispersion forces.
Used in: Milk carton lining, bowls, flexible water pipes, bottles
Highly specialised transition metal catalyst, known as Ziegler-Natta catalysts are used to avoid the need for high
pressure. Due to the polymer being produced under a lower pressure, the conditions are milder and there are fewer
branches.
The lack of branches allows the molecules to pack together tightly increasing the density and the hardness of the
polymer formed. The arrangement of the polymer molecules is more ordered, resulting in crystalline sections.
PVC (polychloroethene) is made out of vinyl chloride monomers. The chlorine atoms introduce dipoles into the long
molecules. This increases the IMF between molecules, which leads to a higher melting point. A PVC item burning in
a flame will not continue to burn when it is removed from the flame. It is used in products such as conveyor belts,
cordial bottles, water pipes and the covering of electrical wires.
Pure PVC is very hard and brittle. Additives are incorporated into PVC to improve its flexibility, thermal stability and
UV stability. In a fire, PVC decomposes to form toxic and corrosive hydrogen chloride.
POLYSTYRENE (PS)
First commercial production by IG Farben; used in disposable household products, plastic model kits, laboratory
containers, insulation and packaging.
Benzene rings are covalently bonded to every second carbon atom in the polymer chain. This causes polystyrene to
be a hard but quite brittle plastic with a low density. It is used to make food containers, picnic sets, refrigerator
parts, and CD and DVD cases. Polystyrene is made from styrene (ethylbenzene monomers).
Polystyrene (polyethylbenzene) is commonly manufactured as a foam. Foamed polymers are formed by blowing a
gas through melted polymer materials. Foaming can drastically change the physical properties of a polymer
material. 95-98% air
Polystyrene foam is produced by introducing pentane into melted polystyrene beads. The beads swell up to produce
the lightweight, insulating, shock-absorbing foam that is commonly used for takeaway hot drink containers, bean
bag beans, packaging materials and safety helmet linings. Once polystyrene has been converted to a foam, it is
difficult to recycle.
Polytetrafluoroethene is used in cookware fabrics, wiper blades, nail polish, industrial coatings. (aka Teflon, or
Fluon). Made out of tetrafluoroethene monomers.
Tetrafluoroethene is formed when all the hydrogen atoms in ethene are replaced by highly electronegative fluorine
atoms.
It has quite exceptional properties that are very different from those of polyethene. It can be used to make non-stick
frying pans, medical implants, gears and clothing. The electronegative fluorine atoms reduce the strength of
intermolecular bonds with other substances.
- Non-stick
- Heat resistant
- Chemical resistant
- Good mechanical properties
- Low friction coefficient
- Flame resistant
- High melting point
POLYETHYLENE TEREPHTHALATE (PET)
Polyesters are a class of polymers that are formed through the process of condensation polymerisation. Polyesters
are formed by combining monomers that contain carboxylic acid and hydroxyl functional groups. They are typically
formed by reacting a dicarboxylic acid monomer with a diol monomer.
This is the most often polymer used to make polyester fabric. PET is synthesised by reacting benzene-1,4-dioic acid
monomers with ethane-1,2-diol monomers.
PET has a range of uses including recyclable drink bottles and food packaging. PET is a strong material because the
ester groups are polar, so that there are dipole-dipole attractions between the polymer chains. Benzene rings make
it stiff and strong, resistant to deformation.
Nylon stockings created shopping frenzy in the USA in the 1940s. It is also used in clothing, parachutes, kitchen
utensils, toothbrushes, fishing lines, guitar strings, seatbelts.
Nylon is formed when a monomer containing an anime group on each end reacts with a monomer with a carboxyl
group on each end, a polyamide can form.
The term ‘nylon’ refers to the group of polyamides, in which the monomers are linear carbon chains. A common
example is nylon-6,6 which is named so because the dicarboxylic acid monomer has a chain of 6 carbons and the
diamine monomer also has a chain of 6 carbon atoms.
Nylon can be easily drawn into fibres that have high tensile strength. These fibres are used to produce strong
lightweight material for clothes.
Inquiry question: How are the ions present in the environment identified and measured?
Inquiry question: How is information about the reactivity and structure of organic compounds obtained?
● conduct qualitative investigations to test for the presence in organic molecules of the following functional
groups:
– carbon–carbon double bonds
– hydroxyl groups
– carboxylic acids (ACSCH130)
● investigate the processes used to analyse the structure of simple organic compounds addressed in the course,
including but not limited to:
– proton and carbon-13 NMR
– mass spectroscopy (ACSCH19)
– infrared spectroscopy (ACSCH130)
Inquiry question: What are the implications for society of chemical synthesis and design?
● evaluate the factors that need to be considered when designing a chemical synthesis process, including but not
limited to:
– availability of reagents
– reaction conditions (ACSCH133)
– yield and purity (ACSCH134)
– industrial uses (eg pharmaceutical, cosmetics, cleaning products, fuels) (ACSCH131) environmental, social
and economic issues
Chemical monitoring and management are needed to ensure the health and wellbeing of both plants and animals.
Monitoring also allows for more effective management.
For example, the destruction of UV-protective ozone, caused by widespread use of chlorofluorocarbons (CFCs)
- Hazardous ions in the environment such as mercury have also been identified and monitored using chemical
techniques.
- Nutrients required by humans and other living organisms have also been discovered through environmental
monitoring.
OUTCOMES
● conduct qualitative investigations – using flame tests, precipitation and complexation reactions as appropriate –
to test for the presence in aqueous solution of the following ions:
– cations: barium (Ba2+), calcium (Ca2+), magnesium (Mg2+), lead(II) (Pb2+), silver ion (Ag+), copper(II) (Cu2+),
iron(II) (Fe2+), iron(III) (Fe3+)
– anions: chloride (Cl–), bromide (Br–), iodide (I–), hydroxide (OH–), acetate (CH3COO–), carbonate (CO32–),
sulfate (SO42–), phosphate (PO43–)
QUALITATIVE ION ANALYSIS
- Precipitate: Insoluble ionic salt formed when 2 ionic solutions are mixed together.
- Qualitative analysis: Identification of the constituents of components in a sample.
- Quantitative analysis: Measurement/determination of the amount (expressed in a concentration) of the
constituent.
- Destructive testing: Test that irreversibly alter the composition of a sample.
SOLUBILITY RULES
Rule Exceptions
All Group 1 (Li+, Na+, K+, Rb+, Cs+) and ammonium (NH4+) are NONE
soluble
All nitrate (NO3-) and acetate (CH3COO-) salts are soluble NONE
All chloride (Cl-) and bromide (Br-) salts are soluble Ag+, Pb+ (Hg+)
All sulfate (SO42-) salts are soluble Ag+, Pb2+, Ba2+, Ca2+, Sr2+, Hg+
All hydroxide (OH-) salts are insoluble Group 1 and NH4+ salts are soluble. Ba2+, Ca2+ are slightly
All carbonate (CO32-) and phosphate (PO43-) are insoluble Group 1 and NH4+ salts are soluble
- 𝐴𝑔+ halides precipitates decompose with exposure to light to form 𝐴𝑔(𝑠) . This is observed as darkening of
the solid.
Complexation reactions are commonly used to identify transition metal cations (due to their d orbitals).
- These consist of a central metal ion (typically a transition metal) coordinated to molecules or ions (polar &
lone pair of electron molecules).
- The coordinating species are called ligands. They are typically neutrally or negatively charged. (E.g.
𝐻2 𝑂, 𝑁𝐻3 , 𝐶𝑙 − , 𝐶𝑁 − )
Coordination complexes are usually coloured and are indicated by the formula being enclosed in square
brackets. E.g. [𝐶𝑢(𝑂𝐻2 )6 ]2+ and [𝐶𝑢𝐶𝑙4 ]2− .
Complexation reactions can be also used in conjunction with precipitation reactions to identify ions.
Sliver halides can be distinguished due to their different complexation reactions with ammonia:
This test can be used to distinguish between Ag+ and Pb2+. (𝑃𝑏𝐶𝑙2 does not dissolve in ammonia)
- Iron (III) ions react with thiocyanate (SCN-) to produce blood red [Fe(SCN)]2+
- Copper (II) ions react with ammonia to form pale blue Cu(OH)2(s) which then dissolves to form deep blue
[Cu(NH3)4]2+
o Ammonia initially reacts with water to produce the OH-: 𝑁𝐻3(𝑎𝑞) + 𝐻2 𝑂(𝑙) → 𝑁𝐻4+(𝑎𝑞) + 𝑂𝐻−(𝑎𝑞)
FLAME TESTING
A flame test is used to qualitatively identify some metal ions in a sample. It can be used to distinguish between
cations that undergo similar precipitation reactions. For example, Ba2+ and Ca2+ or Group 1 metals. However, not all
metals produce a diagnostic flame colour.
ATOMIC EMISSION
ℎ𝑐
𝐸=
𝜆
The colour of the flame produced in the flame test results from a
combination of the most intense wavelengths emitted in the visible
regions.
𝑃𝑏2+ Grey-blue
𝐹𝑒 2+ /𝐹𝑒 3+ Orange-brown
SOLUTION PH
Conjugates of strong acids/bases will dissolve to produce a solution with neutral pH. Conjugate bases of weak
acids/bases will produce a non-neutral pH.
Carbonate anions (CO32-) can be identified through the addition of an acid. Bubbles will be observed. A lime water
test can be used to confirm the presence of CO2(g).
CATIONS
Gravimetric analysis uses the mass of product (precipitate) formed through a precipitate reaction to quantify a
target ion. It is used in applications such as monitoring water quality, determining the mineral composition of soil
and product testing.
The reagent used in the precipitation reaction must react selectively with the target ion and form a highly insoluble
precipitate in order to give accurate results. The selective reagent can be chosen using the solubility rules, while the
solubility of the resulting precipitate can be found by examining the solubility product constant (Ksp).
The amount of the target ion present is usually expressed as a mass percentage of the original sample.
Fertilisers (a solid mixture) commonly contain ammonium sulfate (NH4)2SO4, as a sulfur source for plants. The sulfate
content of fertiliser can be determined gravimetrically through the addition of Ba2+ to form a highly insoluble BaSO4.
Barium can precipitate with CO32-, Cl-, PO43- and OH- anions as well. To precipitate out:
If other anions precipitate with Ba, the mass of the residue collected will increase. Therefore, a higher w/w % will be
calculated than actually present.
EXAMPLE QUESTION 1
The following results were obtained for the gravimetric analysis of sulfate ions in several fertiliser samples
Sample A B
A B
𝑚(𝐵𝑎𝑆𝑂4 ) = 1.642 𝑔 𝑚(𝐵𝑎𝑆𝑂4 ) = 0.0870 𝑔
𝑛(𝐵𝑎𝑆𝑂4 ) = 0.00703663719 𝑚𝑜𝑙 𝑚𝑚(𝑆𝑂4 ) 96.07
% 𝑜𝑓 𝑆𝑂4 𝑖𝑛 𝐵𝑎𝑆𝑂4 = = = 41.17%
𝑛(𝑆𝑂4 ) = 𝑛(𝐵𝑎𝑆𝑂4 ) = 0.00703663719 𝑚𝑜𝑙 𝑚𝑚(𝐵𝑎𝑆𝑂4 ) 233.37
𝑚(𝑆𝑂4 ) = 0.679520932 𝑔 𝑚(𝑆𝑂4 ) = 0.0870 × 41.17% = 0.035814768 𝑔
𝑚(𝑆𝑂4 ) 𝑚(𝑆𝑂4 )
% 𝑜𝑓 𝑆𝑂4 𝑖𝑛 𝑓𝑒𝑟𝑡𝑖𝑙𝑖𝑠𝑒𝑟 = = 5.01% % 𝑜𝑓 𝑆𝑂4 𝑖𝑛 𝑓𝑒𝑟𝑡𝑖𝑙𝑖𝑠𝑒𝑟 = = 2.4%
13.5 1.5
ADVANTAGES
- It is very accurate, if the gravimetric analysis is carefully designed (assumptions) and conducted.
- It does not require speciality equipment to perform.
- It does not require the construction of a calibration curve, which can be time consuming
DISADVANTAGES
- The target ion of interest must be able to form a sufficiently insoluble precipitate for accurate results (A
limitation of the technique)
PRECIPITATION TITRATIONS
OUTCOMES
● conduct investigations and/or process data involving:
– gravimetric analysis
– precipitation titrations
TITRATION
Precipitation titration are commonly used in the quantification of halides (Cl-, Br-, I-). In these procedures, silver ions
are usually the titrant and consequently they are known as argentometric titrations.
- Mohr’s method
- Volhard’s method
- Fajan’s method
Mohr’s method quantifies chloride, bromide and cyanide ions using direct titration with a standard silver nitration
solution.
The presence of multiple anions in a sample can lead to invalid results. Carbonate and phosphate ions will
precipitate with silver.
2𝐴𝑔+(𝑎𝑞) + 𝐶𝑂3(𝑎𝑞)
2−
→ 𝐴𝑔2 𝐶𝑂3(𝑠)
3𝐴𝑔+(𝑎𝑞) + 𝑃𝑂4(𝑎𝑞)
3−
→ 𝐴𝑔3 𝑃𝑂4(𝑠)
- At pH < 6.5, the chromate ion (a weak base) accepts H+ to become HCrO4-, so there will not be enough
chromate in solution to produce the end point colour change. HCrO4- is also bright orange, which obscures
the endpoint.
- At pH > 9.0, the concentration of OH- is too high. It will form a precipitate with Ag to produce AgOH which is
a brown precipitate. It also obscures the endpoint and increases the silver needed to reach it.
Mohr’s method is suitable for the analysis of chloride and bromide ions, but not iodide or thiocyanate ions. This is
because the chromate ions are strongly adsorbed to the surface of AgI and AgSCN precipitates, making the endpoint
indistinct.
In this precipitation titration, the concentration of the indicator used is quite low as adding too much chromate
indicator will lead to an intense yellow colour which masks the end point. Hence the excess titrant required to cause
a colour change is relatively large.
- 2𝐴𝑔+(𝑎𝑞) + 𝐶𝑟𝑂4(𝑎𝑞)
2−
⇌ 𝐴𝑔2 𝐶𝑟𝑂4(𝑠)
- Small concentrations of CrO42- means that equilibrium lies towards the LHS. To shift equilibrium towards the
RHS, a relatively large amount of Ag+ needs to be added.
This excess silver required to reach the end point leads to a systematic error, which can be corrected using a blank
titration.
- The same quantity of chromate indictor is to be used in the titration is added to a suspension of calcium
carbonate (which imitates the white AgX precipitate).
- AgNO3 is added to the solution until a colour change occurs.
- The volume of AgNO3 required to cause the colour change in the blank is the excess volume required. This
volume is subtracted from the titration volumes.
- A known excess quantity of AgNO3 is added to the sample to precipitate all of the analyte anions:
o 𝐴𝑔+(𝑎𝑞) + 𝑋 −(𝑎𝑞) → 𝐴𝑔𝑋(𝑠)
- The excess AgNO3 is determined by back titration against KSCN(aq) standard solution
o 𝐴𝑔+(𝑎𝑞) + 𝑆𝐶𝑁 − (𝑎𝑞) → 𝐴𝑔𝑆𝐶𝑁(𝑠)
- A small amount of Fe3+ is added as the indictor. When excess SCN- is present, there will be a permanent
colour change.
o 𝐹𝑒 3+ − 2+
(𝑎𝑞) + 𝑆𝐶𝑁 (𝑎𝑞) → [𝐹𝑒(𝑆𝐶𝑁)] (𝑎𝑞)
The Volhard titration must be performed in low pH to prevent the precipitation of Fe3+ indictor as Fe(OH)3. At low
pH, there is a relatively low [OH-], therefore the precipitate Fe(OH)3 will not form.
The Volhard method is less valid if the first precipitate formed is more soluble than AgSCN.
- The first precipitate can be removed via filtration before titration. However, this can lead to inaccuracies
and is less convent .
- A dense organic liquid like nitrobenzene or chloroform can be added to the conical flask to act as a barrier
between the precipitate and aqueous layer.
The Fanjan’s method relies on a large precipitate surface area, to allow sufficient dye to adsorb so the colour change
is easily visible.
- Dextrin (starch) can be added to prevent silver halide precipitates from aggregating
- A high concentration of spectator ions can also caused aggregation, so this method cannot be used with all
samples.
- The analyte must also be concentrated enough, as the colour will not be seen if there is too little precipitate.
The pH of the titration reaction must be carefully controlled as anionic dye indicators are conjugate bases of weak
acids. This means it will react with free H+ and will not adsorb onto the surface of the precipitate.
The Bohr model of the atom where electrons are contained in shells around the nucleus of the atom:
- The further away from the nucleus, the higher the energy level of the shell
- These shells have discrete or quantised energy levels
- The lowest energy electronic configuration of an atom is called the ground state
When electrons in the ground state (gas) absorb light energy (photons) corresponding to a difference between
levels, they are excited to a higher energy level.
The light that passes through the sample without being absorbed can be collected as an absorption spectrum.
- The absorbed wavelengths of light can be seen as black lines on a bright background.
- The energies of the absorbed wavelengths match energy gaps between two shells.
As each element has a unique set of energy levels, the wavelengths of light absorbed by each element is
characteristic.
Atomic absorption spectroscopy is a sensitive and highly selective technique that can be used to measure small
concentrations of metal ions. It has an important role in the detection of toxic heavy metals.
In AAS, the concentration of the analyte is calculated from the amount of wavelength of light absorbed by the
sample.
- The wavelength used in the analysis is based on atomic absorptions of the analyte.
- The amount of light absorbed is called the absorbance. It is determined from the relative intensities of light
before and after the sample
𝐼0
𝐴 = log10
𝐼
Where:
The measured absorbance is directly proportional to the concentration of analyte present in the sample.
1) An aqueous solution of sample is drawn up through a fine capillary tube into a nebuliser which turns it into
a fine mist.
2) Carrier gases (air and acetylene) sweeps the droplets into the furnace, which burns the solvent off and
atomises the sample (to their ground states).
3) The hollow cathode lamp emits wavelengths of light matching the energy gaps of the element being
analysed through the atomised sample
4) Analyte atoms in the sample with absorb a fraction of light
5) The remaining light passes to a monochromator which selects a wavelength of light for analysis.
6) The photomultiplier detector measures the intensity of light and replays the data to the analysis software.
The hollow cathode lamp contains the element which being tested. It emits a certain spectral pattern – unique to
each metal.
The calibration curve is used to establish the relationship between measured absorbance and the analyte
concentration for a particular instrument. It is produced by measuring the absorbance of standard solutions.
- It is quick, easy, accurate and highly sensitive and is commonly used to determine the concentrations of
over 65 elements.
- AAS provides a means of investigating phenomena which could not be studied before, such as trace
nutrients and heavy metal pollution.
o Trace elements work in organisms by helping enzymes to function
o Concentration normally range between 1 – 100 ppm
o The discovery of cobalt deficiency in seemingly good pastureland in coastal south-western Australia
where animal health could not be maintained.
o The discovery of a molybdenum deficiency in the soils of arid parts of Victoria where legumes crops
could not be supported.
Advantages
- Simple procedure
- Very sensitive technique (can measure ppb)
- Extremely accurate
- Specific (can analyse a single ion in a mixture)
- Although destructive, uses a very small sample size
- Very fast analysis (1 minute per element)
- Little sample preparation required
Disadvantages
Some elements produce very intense spectral lines that serve as a unique characteristic marker for their presence.
This can be used as a qualitative indicator. When a flame is looked at through a spectrometer it can be further
analysed to determine the concentration of the substance.
AAS is a technique used to identify the presence and concentration of substances by analysing the spectrum
produced when a sample is vaporised and absorbs certain frequencies of light. It is primarily used to determine the
concentrations of cations.
Colourimetry is a technique for determining the analyte concentration based on the absorbance of a coloured
solution.
- The amount of light that is absorbed by a sample is compared to the amount absorbed by a blank or
reference
- The blank contains all components of the measured sample except the analyte
A coloured solution mostly absorbs its complementary colour, which is directly opposite in the colour wheel.
The wavelength of light used in colourimetry corresponds to the strongest absorption of the analyte of interest,
known as the absorption maximum (𝜆𝑚𝑎𝑥 )
- This wavelength is used as sensitivity increases with the intensity of absorption, allowing for more accurate
data to be collected
- Requires an intensely coloured analyte
The main coloured species analysed by colourimetry are transitional metal complexes. Transition metal ions are
often weakly coloured in solution, so they are commonly converted to intensely coloured transition metal
complexes to allow for quantitative analysis. The colour of complex ions depends on:
1) A light source provides a continuous source of white light which is narrowed and aligned into a beam using a
slit.
2) A coloured filter allows a small range of wavelengths to pass through the sample, and blocks the other
wavelengths
3) The light beam passes through the sample, which absorbs a fraction of the light
4) The remaining light is transmitted through the sample and reaches the detector, which converts the
amount of light into an electrical signal.
The calculation of absorbance is similar to the method used in atomic absorption spectroscopy (AAS).
- However, the amount of light absorbed by the sample is calculated relative to the amount of light absorbed
by a blank sample.
- This is to remove the influence of the solvent and other substances present in the sample on the measured
absorbance
𝐼0
𝐴 = log10
𝐼
- A: Absorbance which has no units as its dimensionless. Typically, between 0.3 and 2.5 (AU)
- I0: The intensity of light passing through the blank sample
- I: The intensity of light passing through the analyte sample
𝐴 = 𝜀𝑙𝑐
Many factors can influence the absorbance readings therefore, it is always more accurate to construct a calibration
curve by measuring the absorbance of standard solutions under the sample experimental conditions. This helps to
reduce systematic error.
Similar to AAS, absorbance is proportional to concentration for samples with moderate absorbances (0.3 – 2.5).
Samples should be concentrated or diluted so that measured absorbances are in the range where the relationship is
linear.
Due to the pale green colour of Fe3+(aq), it cannot be directly measured using colourimetry, and requires conversion
to the intensely coloured [Fe(SCN)]2+ complex.
2𝐹𝑒 2+ + 3+
(𝑎𝑞) + 2𝐻 (𝑎𝑞) + 𝐻2 𝑂2(𝑎𝑞) → 2𝐹𝑒 (𝑎𝑞) + 4𝐻2 𝑂(𝑙)
- Fe3+ is then reacted with thiocyanate (SCN-) to form the deep red iron (III) thiocyanate complex:
− 2+
𝐹𝑒 3+
(𝑎𝑞) + 𝑆𝐶𝑁 (𝑎𝑞) → [𝐹𝑒(𝑆𝐶𝑁)] (𝑎𝑞)
The complex ion strongly absorbs blue light at a wavelength of 447 nm.
Colourimetry can be used to determine the stoichiometric ration of reactants in the formation of an ionic species
such as a coordination complex. The absorbances of a series of solutions containing different ratios of reactants are
measured at a wavelength absorbed by the product. The correct stoichiometry of reactants is given at the maximum
absorbance.
The measured absorbances of the solutions are plotted against the volume of a reactant used, and the maximum
absorbance is found using lines of best fit.
The ratio of the reactants in the product corresponds to the moles combined to achieve the maximum absorbance.
OUTCOMES
● conduct investigations and/or process data to determine the concentration of coloured species and/or metal
ions in aqueous solution, including but not limited to, the use of:
– ultraviolet-visible spectrophotometry
SPECTROSCOPY OF ORGANIC COMPOUNDS
The wavelengths absorbed by an organic molecule can be matched to its structural fragments. A structural fragment
that absorbs a characteristic wavelength is called a chromophore.
The overall spectrum can also be used as a signature or fingerprint of the whole molecule. By comparing the
collected spectrum with a database of standards, the compound can be identified.
UV-VISIBLE SPECTROPHOTOMETRY
UV-visible spectrophotometers can also be used to measure the absorbance of a sample over a range of
wavelengths.
- The prism is rotated so that different wavelengths (190 – 700 nm) pass through the monochromator to the
sample then to the detector.
- The absorbance at each wavelength is recorded.
- The UV-visible spectrum plots absorbance against wavelength
Conjugation is where molecules have alternating double or triple and single bonds.
The UV-Vis spectra of organic compounds arise as a result of electronic transitions, just as they do for metals and
transition metal complexes.
Organic compounds can absorb UV and visible radiation as the wavelength in these regions correspond to the
energy gaps between molecular orbitals.
- Similar to the absorption of light by electronic transitions between atomic orbitals in flame test and atomic
absorption spectroscopy (AAS).
- When a covalent bond forms, the atomic orbitals (the orbitals in the individual atoms) combine to produce
new molecular orbitals which contain the electron pair shared in the bond.
- When an appropriate wavelength of light matching the energy gap is absorbed by an organic compound, an
electron can be excited from a lower energy molecular orbital to a higher energy molecular orbital.
The energy gap, and consequently the wavelength required for an electronic transition, depends on the type of
bonding.
- If the conjugation is extended further, the energy gap will be small enough for the molecule to absorb
wavelengths in the visible region (400-800 nm), resulting in a highly coloured compound.
In practice, the range from 190 to 700 nm is detectable by a typical commercial UV-Vis spectrometer.
- UV-Vis spectroscopy of organic compounds is limited in the most part to conjugated systems
- For measurements below 190nm, a vacuum spectrometer and a suitable UV light source are required.
A UV-Vis spectrum is a plot of absorbance versus absorbed wavelengths. The diagram below is the UV-Vis spectrum
for buta-1,3-diene.
The interpretation of the UV-Vis spectrum of organic compounds is straightforward. By comparing 𝜆𝑚𝑎𝑥 with a
database of standards, the type of bonding in a compound can be identified.
𝐶 −𝐻 122
𝐶 −𝐶 135
𝐶=𝐶 162
𝐶 − 𝐶𝑙 173
𝐶 − 𝐵𝑟 208
The exact wavelengths absorbed depends on the rest of the molecule, hence compounds have distinctive UV-Vis
spectra.
The presence of strong absorption bands in the spectrum above 200nm can generally be used to indicate the
presence of conjugation in a molecule. The greater the extent of conjugation, the longer the wavelength absorbed.
All halogens are coloured (bromide, chloride, fluoride and iodide). The addition reaction, halogenation, can be used
as an indicator for alkenes and alkynes through the bromine test.
Once bromide is added to a substance, it is an alkene or alkyne when there is a rapid spontaneous decolourisation of
Br(l). This should be done in the absence of UV light.
Alcohols have hydroxyl (-OH) functional groups. The presence of the hydroxyl functional group can be detected by
reacting a dry sample of the alcohol with a small piece of active metal such as sodium.
- Alcohols react readily with metallic sodium, forming a sodium alkoxide salt and hydrogen gas.
- This occurs for all degrees of alcohol, with reactivity decreasing from primary to tertiary.
The evolution of a gas indicates a reaction has occurred. The gas evolved can be collected and tested with a lit splint.
If a ‘pop’ sound occurs, H2 has evolved and a hydroxyl group is present.
Alternatively, the pH of the alkoxide salt solution formed can be tested with an indicator. Alcohols are neutral. The
alkoxide ion produces a strong base.
−
𝑅𝑂(𝑎𝑞) + 𝐻2 𝑂(𝑙) → 𝑅𝑂𝐻(𝑎𝑞) + 𝑂𝐻−(𝑎𝑞)
The reduction of permanganate or dichromate in acidic solutions results in distinctive colour changes, which can be
used to distinguish between the types of alcohol
CARBOXYL GROUP
Carboxylic (alkanoic) acids contain the carboxyl (-COOH) functional group. They are weak acids as the hydrogen atom
bonded to the oxygen atom will partially dissociate in water.
- An aqueous solution of the carboxylic acid can be tested with blue litmus paper. The presence of the
carboxyl group will turn the litmus paper red.
Alternatively, a carbonate test can be performed. Carboxylic acids react with metal carbonates and metal hydrogen
carbonates to produce a salt, carbon dioxide and water. For example:
2𝐶𝐻3 𝐶𝐻2 𝐶𝑂𝑂𝐻(𝑎𝑞) + 𝑁𝑎2 𝐶𝑂3(𝑎𝑞) → 2𝑁𝑎𝐶𝐻3 𝐶𝐻2 𝐶𝑂𝑂(𝑎𝑞) + 𝐶𝑂2(𝑔) + 𝐻2 𝑂(𝑙)
Effervescence (bubbles) indicates that a reaction has occurred. The gas evolved can be collected and confirmed as a
carbon dioxide by bubbling it through limewater (calcium hydroxide).
INFRARED SPECTROSCOPY
Infrared spectroscopy analyses the interaction of molecules with IR light. It primarily gives information about the
bonds or functional groups present in a molecule and can be used for fingerprinting purposes.
The absorption of IR radiation by an organic compound is associated with a change in the vibrational energy levels
of the molecule. IR induces molecular vibrations.
A molecule can be thought of as a group of spherical masses (atoms) connected by strings (covalent bonds).
- At room temperature, the atoms within the molecules are constantly in motion, vibrating back and forth.
- The fundamental vibrational motions include stretching and bending.
However, unlike masses on a spring, the energy of molecular vibration is quantised. This means every vibration can
only occur at specific frequency that is characteristic to the type of motion, the atoms attached and the bond
strength.
When a molecule is irradiated with energy that matches the energy gap for one of its vibrational modes, it will
absorb the energy and be promoted to a higher vibrational energy level. This results in increased amplitude for the
vibration.
- The energy difference between the vibrational levels corresponds to the frequencies in the infrared region
Since different types of bonds give rise to different vibrational frequencies, each functional group will absorb in a
different IR range. This absorption frequency can be used as a diagnostic marker for the presence of functional
groups.
- IR active vibrations are those that cause a change in the dipole moments of a molecule.
- IR inactive vibrations do not cause changes in the dipole moment of the molecule. For example, vibrations of
symmetrical non-polar molecules like H2 do not result in the absorption of IR energy. Thus, no peak will be
observed for these vibrations.
- The reason for this requirement involves the mechanism by which the radiation transfer its energy to the
molecule.
INFRARED SPECTROMETER
- The IR radiation source is an inert solid that is heated electronically to cause thermal emission of radiation in
the infrared region.
- This incident light is split into two equivalent beams that are passed through a reference and the sample,
where some energy is absorbed, and some is transmitted.
- The beam chopper alternatively passes the beams to the monochromator which filters out a single
wavelength of light.
- The detector calculates the ratio between the intensities of the reference and sample beams to determine
the absorbance.
- The transmittance is plotted, hence absorbed wavelengths are shown by troughs pointing downwards.
- Infrared absorption wavelength is reported in wavenumbers which is a type of frequency measurement. It is
used because the numbers are more convenient.
- The x-axis is not a linear scale. It changes at 2000 cm-1
The exact frequencies absorbed depends on the rest of the molecule, hence
compounds have unique infrared absorption spectra. Infrared absorption beaks are
described qualitatively as strong (s), medium (m), or weak (w). Additionally, broad
(br) troughs may be observed.
ADVANTAGES
- Infrared spectroscopy requires milligram-sized samples, but these can usually be recovered, depending on
the technique used.
- Infrared spectra are very easy and quick to run, and are relatively inexpensive
- Infrared spectra can be used for fingerprinting purposes
DISADVANTAGES
- Functional groups can be identified from the spectrum, but other structural features cannot be determined.
- It can be difficult to resolve spectra from complex mixtures. The presence of multiple organic substances
can result in masking and distortion of characteristic absorptions.
- The sample must be very dry. Water present in samples will make it appear as if the compound contains O-H
bonds.
Elemental analysis of organic compounds is the determination of mass fractions or percentages of carbon, hydrogen
and heteroatoms in a sample. This information can be used to determine the empirical formulae of unknown
compounds.
The mass of each element in a compound can be obtained experimentally by means of combustion analysis.
- This process involves burning a weighed sample of the organic compound in excess oxygen, then collecting
and weighing the combustion products
- From these mass measurements, the percentage composition of the sample can be determined
A molecular formula can always be determined by multiplying the subscripts in the empirical formula by an integer.
To determine the molecular formula, the number of empirical units would need to be calculated. Therefore, you
need to know the approximate molar mass.
𝑀𝑜𝑙𝑎𝑟 𝑀𝑎𝑠𝑠
𝑁𝑜. 𝑜𝑓 𝑒𝑚𝑝𝑖𝑟𝑖𝑐𝑎𝑙 𝑢𝑛𝑖𝑡𝑠 (𝑥) =
𝐸𝑚𝑝𝑖𝑟𝑐𝑎𝑙 𝑀𝑎𝑠𝑠
MASS SPECTROMETRY
Mass spectrometry is an analytical technique for studying the chemicals present in samples, and for probing the
molecular structure of compounds. A mass spectrometer measures the masses of molecules and atoms by volatising
then ionising them.
The most common type of mass spectrometer is the electron ionisation magnetic sector instrument
- A very small (picogram to nanogram) sample is injected into the mass spectrometer and vaporised into its
gaseous state.
- The sample is then ionised by bombardment by a high energy stream of electrons, which knock valence
electrons from the molecules in the sample, creating cations.
− Many of these cations are unstable and will decompose into fragment (daughter) ions and radicals.
- The cations are then accelerated into a magnetic field which causes the ions to travel on a curved path.
Uncharged radicals cannot be accelerated
- The curvature depends on the mass-to-charge (m/z) ratio of the particles. The larger the ion, and the lower
the charge, the lower the deflection.
- By varying the strength of the magnetic field, ions of differing mass can be brought to focus on the detector
- The detector is composed of a conductive metal. Like an anode, it is a source of electrons. When the positive
ions collide with it, they gain an electron and become neutralised. A small current is produced, amplified and
recorded as a spectrum by a computer.
1) Vaporisation
2) Ionisation
3) Acceleration
4) Deflection
5) Detection
The mass spectrum records the abundances of the fragments of different m/z ratio relative to the most intense peak
(the base peak).
- Each peak represents an ion with a specific m/z ratio. Since the charge of these fragments are usually +1, the
value of m/z is usually the same as mass.
The mass spectrum can be used to determine the molecular formula of a substance.
- The ions with the greatest mass will correspond to a molecule that has only lost a single electron (parent
peak), giving relative molecular mass of the intact molecule
- This can be combined with data from elemental analysis to calculate molecular formula
The masses of the detected fragments can be used to deduce structural information about the molecule. Working
backwards, the identified fragments can be reassembled to generate the original molecule.
- The more stable the fragment ion, the higher its abundance
- The base peak represents the fragment ion with the highest stability
Different types of fragments have different stabilities, which result in unique fragmentation patterns. The overall
fragmentation pattern can be used for fingerprint purposes to identify the molecule by comparison with the spectra
of known compounds from a library.
15 −𝐶𝐻3 31 −𝑂𝐶𝐻3
17 −𝑂𝐻 43 −𝐶𝐻2 𝑂𝐻
−𝐶𝑂𝐻
ISOTOPES IN MASS SPECTRA
Some elements have more than one isotope in high abundance. In particular, chlorine and bromine have isotopes
that differ by a mass of 2.
𝟑𝟕 24%
𝟏𝟕𝑪𝒍
𝟕𝟗 51%
𝟑𝟓𝑩𝒓
𝟖𝟏 49%
𝟑𝟓𝑩𝒓
The presence of these isotopes can be observed in the mass spectra of chlorinated or brominated compounds.
Due to the sensitivity of mass spectrometers, the mass spectra of compounds can be used as fingerprints for
identifying compounds.
- Mass spectrometry can be used to unambiguously identify a substance as no two substance produce the
same fragmentation pattern
- Experimentally obtained spectra can be compared with databases of known substances
Mass spectrometry is often used in conjugation with chromatographic separation and is routinely used to analyse a
wide range of industrial, environmental and forensic samples. It is also used for:
- When hundreds of compounds are present in a sample, there may be so many peaks present that it
becomes impossible to determine what fragments are present
- In these cases, mass spectrometry can be used to determine molecular masses and molecular formula, but
cannot be used to determine the structure of components
- Overshowed by the large quantity of structural information available in NMR spectroscopy.
Nuclear magnetic resonance (NMR) spectroscopy is one of the most powerful techniques for the analysis of organic
compounds.
If a nucleus contains an odd number of protons and/or odd number of neutrons, it can exhibit spin (similar toe
electron spin). This means that the nucleus will behave like a magnet in a magnetic field, and can be detected by
NMR (NMR-active or spin-active).
The spins of the nuclei in a sample are not oriented, and are initially degenerate (same energy). However, when
placed in an external magnetic field, the spin-active nuclei will adopt one of two states:
1) A higher energy spin state aligned against the magnetic field (antiparallel)
2) A lower energy spins state aligned with the magnetic field (parallel)
The difference in energy between the two spin states is Δ𝐸, and this amount of energy lies within the
radiofrequency region of the electromagnetic spectrum.
Most carbon atoms in a sample will usually be carbon-12, which cannot be analysed using NMR. However,
approximately 1% of a typical sample of carbon will consist of the carbon-13 isotope, which is spin-active and can be
detected in NMR spectroscopy.
A carbon-13 NMR spectrum gives information about the number and type of carbon environments in a molecule.
The frequencies that are absorbed in an NMR experiment are proportional to the size of Δ𝐸. Electrons are moving
charged particles, so they will create a small magnetic field around the nucleus which will change the size of Δ𝐸, and
hence the absorbed frequencies. This is known as electron shielding.
- Electron shielding changes depending on the atoms and bonds around the nucleus (indicated by the position
of the signal)
- The number of unique chemical environments for a particular type of nucleus will determine the number of
unique Δ𝐸, which will match the number of signals in an NMR spectrum.
CARBON ENVIRONMENTS
If the carbon nuclei can be interchanged via bond rotation or rotation in space, they will be in the same chemical
environment and produce the same signal.
The number of signals in the spectrum matches with the number of unique hydrogen environments.
- 0-1.5 ppm: protons on saturated carbon centres, or on carbons attached to saturated centres
- 1.5-2.5 ppm: protons on carbons attached to unsaturated centres (alkenes, alkynes)
- 2.5-4.5 ppm: protons on carbons attached to electronegative atoms
- 4.5-6.5 ppm: protons on alkene carbons
- 6.5-8.0 ppm: protons on aromatic rings (benzene)
Additional information can be obtained from higher resolution H-NMR spectra: from signal splitting and the area
under each integral.
HYDROGEN ENVIRONMENTS
Substitute ‘X’ a dummy atom and see how many different isomers there are.
The area under the signal corresponds to the number of hydrogen nuclei in that environment. Use a ruler to
measure the ratio.
SPLITTING (MULTIPLICITY)
In H-NMR each signal can be split into multiple peaks, called a multiplet. Splitting arises from the interaction of the
spins of nearby nuclei, called coupling.
Splitting follows the n + 1 rule: protons that have n protons in a different chemical environment on immediately
adjacent carbons show n + 1 peaks in their signal.
The heights of the peaks in multiplet matches Pascal’s triangle, with taller peaks in the middle and a symmetrical
structure.
0 1 Singlet 1
1 2 Doublet 1: 1
2 3 Triplet 1: 2: 1
3 4 Quartet 1: 3: 3: 1
4 5 Quintet 1: 4: 6: 4: 1
NMR spectroscopy by far is the most powerful technique for determining and confirming the structures of organic
compounds, due to the large amount of structural information given in a spectrum.
NMR is less sensitive than other techniques, so the sample sizes required are larger than for other techniques.
However, NMR spectroscopy is non-destructive for samples can be recovered.
Highly complex, large molecules will produce a spectrum that are difficult to interpret.
Chemical synthesis refers to the purposeful use of chemical reactions to obtain a desired product. A synthesis
reaction is when smaller compounds undergo a chemical reaction to produce a larger compound (product).
The development of chemical syntheses for desirable product compounds has been of fundamental importance to
our standard of living and has addressed issues such as:
Desired products typically cannot be produced in a single step from the available starting materials. Instead, a multi-
step chemical synthesis is required.
A reaction pathway is commonly designed by working backwards from the desired product and identifying the
intermediate products and reaction conditions that would result in the formation.
The analysis of a compound to devise a suitable reaction pathway is called a retrosynthetic analysis.
- A retrosynthetic analysis can often identify a number of alternative reactions pathway to produce a desired
product. This can be seen for the synthesis of butanone.
A number of factors are considered when selecting the most desirable reaction pathway:
- Hard to obtain
- ↓Supply → ↑Price → ↑Cost of production
The yield of a reaction is the amount of product obtained compared to the theoretical maximum expressed as a
percentage. The theoretical maximum amount of product that can be formed from a reaction is based on the
amount of the limiting reagent.
The amount of product that is obtained from a reaction (actual yield) is commonly expressed as a percentage of the
theoretical maximum (theoretical yield).
An additional consideration in the selection of a reaction pathway is the number of steps required to convert a given
starting material to the desired product compound.
- The overall yield of a reaction pathway typically decreases with the number of steps in the reaction
sequence
- A reaction pathway with a large number of single steps reactions will result in a low yield.
The overall yield for a multi-step reaction pathway can be calculated from the yield for each of the individual steps
A linear synthesis is where each intermediate product was the reactant for the next subsequent step.
One strategy to improve the overall product yield of a multi-step reaction pathways is convergent synthesis.
- A convergent synthesis reduces the number of linear steps in a sequence by using individual reaction
pathways to synthesis the intermediate products
- The intermediate products are then combined in a single step to generate the final desired product.
A convergent reaction pathway typically has a higher overall yield compared to the same reaction pathway
performed as a linear sequence.
An additional consideration in the selection of a reaction pathway is the selectivity of each of the individual steps to
form the desired product. TLDR: basically, consider the major and minor products.
PURITY
Product purity is continually monitored throughout chemical manufacture to ensure that the product meets
specifications. This process is commonly referred to as quality control.
REACTION CONDITIONS
- Conditions are adjusted to ensure the desired product can be obtained in high yield and at a reasonable
reaction rate.
- This is particularly important in the chemical industry, where small gains in yield and rate can dramatically
improve profitability.
- Maximise yield
- Maximise rate
- Minimise waste
o Use the by-product of the reaction for something else
o Recycle energy
- Safety
Reaction conditions that are commonly optimised to improve the yield and/or rate of a chemical process include:
However, there are other considerations in addition to product yield and reaction rate when selecting optimal
temperature and pressure conditions:
ENVIRONMENTAL ISSUES
Most industrial processes consume large amounts of energy. For example, the production of ammonia via the Haber
process accounts for around 1.2% of the global energy consumption each year. Issues of high energy consumption
may include:
Whenever possible, energy should be recycled to minimise environmental impact and reduce costs.
THERMAL POLLUTION
Many industrial processes use high temperatures processes, which means cooling the products is often necessary.
Water is commonly used as a coolant as there are huge water bodies and due to its high heat capacity.
Discharging warm water into the environment may cause thermal pollution. The temperature of water body may
increase, causing the concentration of oxygen to decrease. This potentially kills off aquatic life.
Holding ponds can be used to allow water to cool before it is discharged. Releasing warm water into the ocean is
also a feasible solution, as the ocean is large enough to dissipate heat quickly.
TOXIC EMISSIONS
Chemical processes should be designed to use substances that minimise hazards to users and the environment. For
example, the production of sulfuric acid is associated with fugitive emission of SO2(g). It is a toxic gas and forms an
acidic solution in water.
WASTE DISPOSAL
Depending on the chemical process, different types of waste are generated which must be appropriately handled.
Sulfuric acid is manufactured using the contact process (as the reaction occurs on the surface of the catalyst).
The key step in the contact process is the conversion of SO2 to SO3. It is the yield determining step as it is a
reversible process.
𝐻2 𝑆𝑂4 is used in many other chemical processes such as the production of fertilisers, synthetic detergents and HCl.
𝑆𝑂2(𝑔) 𝑎𝑛𝑑 𝑆𝑂3(𝑔) forms acidic rain in the atmosphere. They are both toxic gases as well.
TEMPERATURE
A moderate temperature is considered a compromise between rate a yield as it achieves an economically viable
rate and yield.
PRESSURE
- ↑ Pressure → Favours the side with the least gas mols (RHS) → ↑ Yield%
- A high pressure also benefits rate of reaction as there are significantly more collisions and potential
effective collisions resulting in reactions.
However, high pressures are expensive as energy is required to create high pressure, and equipment must be
reinforced to contain increased pressure. High pressure can also pose a safety risk
CATALYST
A magnetite catalyst containing iron (II/III) oxide (𝐹𝑒3 𝑂4 ) is used. The catalyst provides an alternative energy path
that is lower than the original. It increases the rate of reaction and does not affect yield.
REMOVAL OF PRODUCT
The ammonia can be separated from the unreacted reactants through liquifying it by cooling the system to −33℃.
The ammonia can be removed, and the unreacted gases are recycled back into the reaction chamber to reduce
waste.
YIELD
ENVIRONMENTAL IMPACTS
The production of ammonia via the Haber process accounts for around 1.2% of the global energy consumption per
year. The source of energy is from the combustion of fossil fuels/
Since the Haber process is an exothermic reaction, the heat produced from the reaction can be recycled.
When warm water is discharged into the environment it can be problematic as oxygen has a lower solubility at high
temperatures.
PRODUCTION OF ETHENE
The principle of atom economy seeks to design chemical reactions such that the greatest number of atoms from
reagents are incorporated into the desired product.
The atom economy of a process is calculated as a percentage based on the molecular mass of the desired product
and the sum of the molecular masses of the reactants
All Group 1 (Li+, Na+, K+, Rb+, Cs+) and ammonium (NH4+) are NONE
soluble
All nitrate (NO3-) and acetate (CH3COO-) salts are soluble NONE
All chloride (Cl-) and bromide (Br-) salts are soluble Ag+, Pb+ (Hg+)
All sulfate (SO42-) salts are soluble Ag+, Pb2+, Ba2+, Ca2+, Sr2+, Hg+
All hydroxide (OH-) salts are insoluble Group 1 and NH4+ salts are soluble. Ba2+, Ca2+ are slightly
All carbonate (CO32-) and phosphate (PO43-) are insoluble Group 1 and NH4+ salts are soluble