Professional Documents
Culture Documents
VMH 3 Cs
VMH 3 Cs
VMH 3 Cs
Power supply: 3 ea. 1.5 V standard batteries Search head (slim): 308 x 170 mm ±5 mm
D-size or 3 ea. 1.24 V
rechargeable battery KR35/62
UXO search head (Option):
Stick probe (Option):
615 mm Ø ±5 mm
40 mm Ø ±5 mm
¢ Highly effective automatic
Battery life:
approx. 30 hours
depending on battery type
Length of telescopic carrying bar
length: 445 mm ±5 mm
ground compensation
and SOIL program with slim search head: min. 920 mm ±5 mm
max. 1260 mm ±5 mm
Sweeping speed: 0.2 - 1.5 m/s — standard
0 - 0.2 m/s — pinpointing
with UXO search head (Option):
min. 984 mm ±5 mm
max. 1324 mm ±5 mm ¢ Metal alarm: audio, visual
Operation temperature: -31° C to +63° C
Storage temperature: -51° C to +71° C
with stick probe (Option):
min. 935 mm ±5 mm
max. 1278 mm ±5 mm and vibration
Environmental According to MIL STD 810F Backpack with slim search head: approx. 550 x 280 x150 mm
conditions: 501.4-II, 502.4-I, 502.4-II, 503.4, Carry bag UXO search
506.4-III, 514.5 C1 head (Option):
Hard case (Option):
approx. 660 x 700 x 110 mm
approx. 555 x 350 x 230 mm
¢ Length continuously adjustable
Search programs: 2 soil programs
(normal, mineralized) Weights:
Metal alarm:
acoustic via loudspeaker or
earphones
Complete detector set during operation (with batteries)
- with slim search head: approx. 2.5 kg
¢ Input for firmware upgrade
visual via LED-bargraph - with UXO search head (Option): approx. 2.9 kg
vibration alarm - with stick probe (Option): approx. 2.4 kg
Power line suppression: automatic Transport weight* in field
backpack: approx. 3.4 kg
¢ UXO firmware available
Waterproof: up to 4 meters
Transport weight* in hard case: approx. 9 kg
(incl. field backpack)
*) including operation manual, field manual and one set of
batteries
All technical data are subject to change without prior notice. NATO-STOCK-Number 6665-12-368-0519
Issue 07/2009
The modern DMPI technology (Digital Magnetic Pulse Trained operators can start in less than 30 seconds. An automatic continuous self check of six important
Induction), and the cable free design is the logical re- functions including cable damage and battery level
control is the life insurance for the deminer. System
sult from close cooperation with military, humanitar- Search Head with Telescopic Pole failures are immediately indicated by a special audio
ian and commercial mine clearance personnel. The rugged search head contains the Digital Pulse In-
and visual alarm.
duction Sensor with integrated noise reduction fea-
The operating length of the VMH3CS can be adjusted tures. The slim shape allows free view to the soil and
during operation in just a few seconds. The extreme The automatic detection level control guarantees a
easy operation in difficult and dense vegetation, rocks,
short length for prone position meets the special re- long-term constant sensitivity for hours of operation
shallow water and mud. This unique design provides
quirements of the professional deminers all over the independent of the battery level, temperature and
precise pinpointing and an excellent separation be-
world. other environmental conditions.
tween narrow placed targets without loss of detection
The front panel contains all controls.
speed.
Setting into Operation The inner and outer tube of the telescopic pole are
The VMH3CS has one mode selector in order to set
protected against twisting. The length of the telescop-
the main detection features:
The VMH3CS requires only minimal operator training. ic pole can be adjusted from 920 mm to 1260 mm in
• Remove the detector from the backpack just a few seconds.
off: OFF
volume
control Digital Output
For computer-aided detection of unexploded ordnanc-
es and for archiving
Ergonomic Operation the measuring data
The operation and indication elements are integrated of a survey field the
in the hand grip and can easily be operated with the front panel of the
thumb. VMH3CS contains
The LED-bargraph with 14 ele- a watertight data
position for kneeling ments is clearly visible even in output.
the sunlight. The length of the
bargraph is proportional to the Via the serial inter-
metal alarm. face, the VMH3CS
can be connected
A vibration alarm is complet- to the Vallon Data-
ing the acoustic and visual loggers or directly
alarm. to a Laptop, pro-
vided that the evaluation software VALLON EVA2000®
Fine adjustment of the detector is done by means of has been installed.
the four rigid push buttons:
-: decrease (volume, sensitivity) The same interface allows to update the firmware of
+: increase (volume, sensitivity) the VMH3CS respectively to realize your indivdual re-
C: compensation (ground balance) quirements.
: pinpointing