MIDTERM EXAM II/2019 - 2020: HCM City University of Technology

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

HCM CITY UNIVERSITY OF TECHNOLOGY MIDTERM EXAM II/2019 – 2020

FACULTY OF ELECTRICAL & ELECTRONICS ENGINEERING


DEPARTMENT OF TELECOM. ENGINEERING Subject: Analog Signal Processing-405401
Date: 04/06/2020 – Duration: 90 minutes
Instructions:
- ONE A4 PAPER (2 SIDES) OF NOTES IS ALLOWED
- Number of Questions: 4

Question 1 (2.5 marks)


a) Consider the signal x(t ) = 2e−t [u(t ) − u(t − 3)] . Sketch the signal and calculate the energy of
the signal x(t ) . Then, sketch the signals y(t ) = x(t − 2) and y(t ) = x(−t − 2)
b) Consider the triangle periodic signal as in Figure below where A = 5 , T = 2 . Determine the
power of the signal x(t ) .

Figure Q1

Question 2 (2.5 marks)


Consider the circuit in Figure Q2 with R1=5 k, R2=10 k, C=10 µF, vs=6 V. The switch was
closed for a long time. At t=0, the switch is open. Determine vc(t) and ic(t) for t < 0. Then, determine
vc(t) and ic(t) for t > 0.

ic(t)

Figure Q2

Question 3 (2.5 marks)


An LTI analog system has the following unit impulse response

h(t ) = e−2tu(t )
+
By using the convolution formula y (t ) = x(t )  h(t ) =
−
 x( )h(t −  )d
a) Find the zero-state response for y(t) for the input x(t ) = e−3tu(t )
b) find the zero-state response for the input x(t ) = u(t ) − u(t − 1)

Question 4 (2.5 marks)


Consider the below circuit with R1=1 K, R2=2 K, R3=2 K, R4=2 K , R5=2 K, R6=5 K,
v1=0.2 V, v2=0.5 V, v3=0.4 V. Find the voltage vo and i1, i2 , i3 , i4 , i5 , i6.

R5

R1 i5
V1 -
V- Vo
i1 R2 V+
V2 +

i2 R3
V3
i6 R6
i3
R4
i4

You might also like