Professional Documents
Culture Documents
Evaluation Activity Second Term
Evaluation Activity Second Term
Evaluation Activity Second Term
Introduction:
A machine tool designed to manufacture parts in a fully automatic way is called a CNC lathe or numerical control lathe.
For this, these lathes have software installed that allows their control, automating the process. This software is known as
CNC or computer numerical control.
A thread is a notch with a certain profile that goes around in a spiral along a cylindrical wall - on the outside of a cylinder
or inside a cylindrical hole - in a continuous line.
Developing:
First I will open the program to be able to create the piece
Bar facing. It is the operation carried out on the lathe by means of which the end of the piece is machined, in the
plane perpendicular to the axis of rotation.
Me calculate the speed to take into account that the piece must be rotating and how fast it must go and its cutting speed is
200mm / minute with a diameter of 30.
We do the calculation with the data we have to know at what rpm the workpiece will be rotating
We make a conicity
I turn the piece. I will perform a turning
Make a groove, we change the burin