Professional Documents
Culture Documents
Axial Control Valve Brochure
Axial Control Valve Brochure
Axial Control Valve Brochure
AXIAL
control VA LV E S
CB SERIES
www.goodwinflowcontrol.com
LEARN MORE
TAKIN G
FLOW
control
TO THE
NEXT LEVEL INNOVATIVE DESIGN
PATENTED (PENDING) FEATURES
3 PIECE BODY
RACK-PINION-RACK GEAR TRAIN
Goodwin can supply a diverse range of forged or cast With 40 years of valve manufacture and
valve body materials, including a wide selection of international sales, Goodwin has built an
Carbon Steel, Stainless Steel, Duplex Stainless Steel, enviable reputation for providing quality products
Nickel Alloy and Titanium Alloy. at internationally competitive prices.
Specified throughout the hydrocarbon, energy, and With valve sales in excess of 800 million USD
process industries, Axial Control Valves are used in a in the past 10 years, Goodwin International is
diversity of liquid, gas and multi-phase fluid applications: globally approved. Its high quality products are
supported by an organisation that has extensive
· Severe service control · Pressure let-down experience, knowledge and skill sets to meet
· Critical service control · Noise attenuation today’s stringent end-user specifications and their
· Anti-surge · Anti-cavitation quality management system expectations.
· Recycle control · Joules-Thomson
DEMONSTRATING THE
LEVELS OF TECHNICAL
EXCELLENCE AND RELIABILITY
www.goodwinflowcontrol.com OUR CUSTOMERS EXPECT
A NEW BREED O F Goodwin Axial Control Valves come equipped
axial control
with innovative features that set Goodwin
apart from its competition. Providing durability,
reliability and control, with the exceptional
F OR ENH A N CE D FLO W service that Goodwin is renowned for.
OPERATIONAL BENEFITS
ACCURATE CONTROL
HIGH CAPACITY
HIGH TURNDOWN
TIGHT SHUT-OFF
FAST OPENING/CLOSING
RELIABILITY
FLEXIBILITY
HIGH CAPACITY
6,000
Typical Globe Valve Cv
Typical Axial Valve Cv
Goodwin Axial Valve Cv
5,000
FULLY PRESSURE
BALANCED DESIGN
Capacity Cv
4,000
3,000
RACK-PINION-RACK
GEAR TRAIN
2,000
F U L LY T E S T E D
BODY DESIGN
LOW EMISSION 0
4” 6” 8” 10” 12” 14” 16”
Valve Size
www.goodwinflowcontrol.com
UNPRECE DEN TED
innovation
I N FLO W CO N TR O L
Metallic
Secondary
Sealing
3 PIECE SPLIT
BODY DESIGN
Flow Direction
PTFE
Primary
The Goodwin Axial Control Valve incorporates a novel 3
Sealing
RACK-PINION-RACK piece split body design which is widely accepted across the
GEAR TRAIN energy industries for other valve types providing:
LOW MAINTENANCE • Dual redundancy sealing with primary and secondary COST & TIME
www.goodwinflowcontrol.com SEIZURE FREE DESIGN sealing EFFECTIVE SOLUTIONS
T H E ONLY CHO ICE
VALVE S Y STEM With the Goodwin Axial Control Valve being a fully
pressure balanced design, actuation forces are
minimised, requiring much smaller actuators than
equivalent sized globe valves.
FULLY PRESSURE
BALANCED DESIGN All types of linear motion actuators can be
accommodated to meet control system requirements –
pneumatic, electric, electro-hydraulic.
BALANCED
Actuator image is
representative only. All
actuator manufacturers
and types are available.
The Goodwin Axial Control Valve is a fully • No need for a bypass or pilot valve to equalise FORWARD & REVERSE
pressure balanced design, avoiding imbalance in line pressure to open the valve PRESSURE BALANCED
the forces acting on the piston or the stem:
• Valve closure time in less than 2 seconds can
• Pressure balancing is equally effective in both be achieved
forward and reverse pressure conditions
Being fully pressure balanced, together with
• Stable operation permits high rangeability / the low frictional forces of the rack-pinion-rack
high turndown ratio mechanism, enables the use of compact and cost
effective actuation compared to other valve types.
• The valve can be opened against full
differential pressure
www.goodwinflowcontrol.com
trim current scope of control
With control valves, energy conversion takes
place when pressure is reduced across the valve.
Noise can be generated from 3 sources: valve manufacture
Dependent on the fluid, the magnitude of the • Energy conversion over the trim
pressure let down and the ratio of the inlet to outlet • Turbulence within the valve body
• 2”-48” Valve Size range
pressure can give rise to problems which can be • Vibration and resonance
eliminated by correct valve sizing and trim selection. • ASME 150-2500lb, API 3000 – 15,000 pressure class range
Within the Goodwin Axial Control Valve, almost all
Such problems that can occur if correct trim energy conversion takes place within the trim. This • Carbon, Low Temperature Carbon, Stainless, Duplex, Super Duplex Steels,
selection is not made: is unlike the globe control valve, where part of the Low-High Alloy, Nickel Alloy and Titanium Alloy.
energy conversion takes place within the valve body
• Cavitation and Flashing - Liquids and, therefore, is not controllable. Turbulence is • Axial Valve fire tested design to API 6FA & ISO 10497 verified by
• Noise – liquids and gases minimal due to the unrestricted, streamlined, annular Lloyds register
flow path through the valve.
These problems, apart from being mechanically • Hydro tested to API 598, FCI 70-2, ASME B16.37
damaging to the valve, are environmentally The problems of vibration and resonance, together
• Control Valve Sizing in compliance with IEC 60534
unacceptable as noise is “pollution”, and a safety with the energy conversion, can be managed and
concern to responsible plant operators. controlled by correct valve sizing and trim selection. • Wall thickness in accordance with ASME B16.34
• Control Valve single and multi stage trims designed for compressible and
incompressible fluids, anti-cavitation, noise attenuation and high
pressure drop.
• Linear, Equal Percentage and Fast Opening control valve cage trim
Single Stage Single Stage Multi Stage characteristics available. Customised bespoke trim designs are also available.
www.goodwinflowcontrol.com
research & quality
development FM 00343
Goodwin International has
an excellent reputation as an
established and recognised
supplier to global industry.
Extensive research and testing has been
EMS 600979
Registered
www.goodwinflowcontrol.com
company overview global offices & agents
Goodwin International is globally recognised and approved
for its design, manufacture and supply of valves to the world’s
hydrocarbon, energy and process industries.
Goodwin International
The history and pedigree of Goodwin dates back to 1883. The Goodwin Office
initial company established in that year was an iron founders and Agent / Distributor
engineers, R Goodwin and Sons (Engineers) Ltd. The foundry
exists to this day operating under the name of Goodwin Steel
Castings, and is one of the foremost nickel alloy foundries in
Europe. It too is located in Stoke-on-Trent.
Publicly listed on the London Stock Exchange, Goodwin PLC Goodwin International Ltd - Goodwin Valve and Pump Co.,Ltd
UK Office & Manufacturing Facility
is family managed. Currently the group is headed by the fifth
Rua das Margaridas, 70
generation of the Goodwin family with members of the sixth Plantation Road Terra Preta - Mairiporã - SP
generation now in management positions within its operating Trentham, Stoke-on-Trent CEP 07600-000
ST4 8HU England Brazil
companies. www.goodwinflowcontrol.com www.goodwinlatina.com
Goodwin Steel Castings
With over 1.5 million valves in service from 40 years of supply to Tel +44 (0)1782 654000 Tel +55 11 4486 1429
Fax +44 (0)1782 208060 Fax +55 11 4486 3427
the global hydrocarbon, energy and process industries, Goodwin Email flowcontrol@goodwingroup.com Email rarmengou@goodwinlatina.com
International Ltd provides a comprehensive level of customer
service supported by a comprehensive representative network and Goodwin Korea Co., Ltd Goodwin International Ltd
its own overseas offices in Brazil, Dubai, South Korea, China and Japan Liaison Office
13-1, Jungbong-daero,
Japan.
396 Beon-Gil, Seo-gu, Incheon, Tel +81 904177391
South Korea Email kfuruzono@goodwingroup.com
www.goodwin.co.kr
www.goodwinflowcontrol.com
GIV-098 09.2017