Professional Documents
Culture Documents
PDS RECECoat FINE GREY
PDS RECECoat FINE GREY
PDS RECECoat FINE GREY
APPLICATIONS
USAGES Preparation of Substrate
• Standard grade color plaster where minor surface The substrate must be clean and free from dust oil, paint,
profile corrections are required in columns, beams and or grease. The substrate has to be pre-wetted, however water
precast walls. accumulation on the surface must be avoided.
• Minor holes 2 to 4 mm deep can be filled up resulting to Mixing
a very fine smooth finish. RECECOAT FINE GREY must be mixed with clean water at the site
by means of a powder drill whisk. Prepare the required water in
a suitable mixing container, and then add RECECOAT FINE GREY
into the mixing container while stirring continuously until a
smooth creamy consistency is obtained. The mixture can be
applied immediately after mixing. No stand-off time is
required, but ensure the entrapped air is avoided. (For water
consumption please refer to the Technical Data).
TECHNICAL DATA
Type Thin plastering mortar
Form / Color Powder / Cement Grey
Material Coverage 14 - 15 m2 at 3 - 4 mm thick (with smooth finish)
Wet Density (Freshly Mixed) 1.280 kg / litre (ASTM C172M)
Pull-Off Adhesion Strength @ 28 days approx. 0.5 - 0.8 MPa (ASTM D7234)
Mixing Water Consumption approx. 5.0 - 5.8 litres / 20 kg-bag
Storage Store in a cool dry place
Shelf Life 12 months (unopened)
Packaging 20 kg / bag