Professional Documents
Culture Documents
Recegrout Sl10: Product Data Sheet
Recegrout Sl10: Product Data Sheet
RECEGrout SL10
High Strength, Non-Shrink, Pumpable Cementitious Grout
APPLICATIONS
USAGES The surface to receive the grout must be clean and free from all
traces of loose materials, old coatings, curing membranes, release
RECEGROUT SL10 in addition to those listed for RECEGROUT
agents laitance, oil and grease, etc. Substrate compression
SL10, are:
• Grouting into details and voids with narrow width strength should be atleast 20 MPa (3,000 psi). Place the mixed grout
dimensions (3-4mm). into forms immediately after mixing, taking care to ensure no
air is trapped by pouring continuously. If formwork type repair
• Grouting under base plates, tanks, etc., where
is used, leave the formwork in place for at least 5 days. Upon
dimensions are minimal.
• Grouting around pipe sleeves and liners. removal of the formwork, cure the expose surface immediately
by spraying with RECEKURE S or use other curing methods. Clean all
• Grouting of rock anchors, tensioning cables, etc.
tools and application equipment with water immediately after
use.
TECHNICAL DATA
Form Powder/Grey
Packaging 25 kg / bag