Engine Final Drives
Engine oder Cat" 35088 EUI Diferenval Rate ZTE
Gross Powor ~ SAE ITO TER 1000 Planetary Ratio ToT
Net Power— SAE JT BOW sap Total Reduction Ratio TaI6:
Nat Power Cat BOW 838 hp + Planetary, fulfosting
Flywheol Powor BOR 88Bhp
Net Power 180 9249 Boo Behe _———————<<—__.
Not Powor ~ B0/T25uEEC BaoKW __838hp Brakes
Peak Toraua a7aNm 3476 R
Toque ise Bi, Brake Surface — Front Tere BL
aa oan aT Brake Surface—Reer _____10z IGem” 1582810"
Soke Ts0mm 75 + Meets 80 3450-1996 standards up to 163 283 k (350,000 Ib]
Displacement BL 2106 ‘1058 operating weight
+ Not power advertised is the powor avaitable at rated speed
cof 1760 rpm, measured atthe flywheel whan the engine is
‘equipped with fan, air cleaner, mutfier and alternator. Body Hoists
+ Rags asodon andr arcondtions 2" CUT" Fond Fagan =Hghae GTS gata
2 (29.32 Ha) dry barometer. Power based on uelhaving — eve ow High Ie —_ #8 min_1315 gatmin
API oravity of35 at 16°C (60°F and an LHV of 42780kifkg Role Valve Seting— Reiso Taeee Re, 2a el
{18:30 BTU) when engine used ata” C (86 F ela Valve Seting= Lower 18880kPa 5480 psi
+ No engine deratng required upto 220m 75008 aitude, Baa RelseTime—Wighidle _1Seconds___
+ Meets U.S. Environmental Protection Agency Tier 1 ee fel aL
eebeiavieas Body PowerDawn—HighTdle 13 Seconds
Capacity - Dual Slope - 100% fill factor
‘Target Gross Machine ‘163 360 kg 360,143 1b Struck 42.4 mm 55 yd
Operating Weight Heaped 2:1 (SAE) 60.1 m" 786 ya
Dperating Weight — empty B4670Kkg §— 142,573 Ib
Weight Distributions - Approximate
Operating Specifications a
m 9 Sp Front Axle — Empty a
Tominal Payload Capaciy We oaes TaOvons Front Ae Loaded we
Body Capacity - Stuck Bin B5.00yE Rear Ade Empty Ea
Body Capacity SAE wn Tas v6 ear Axl= Loaded ae
+ Refer to the Caterpillar 10/10/20 Payload Guidelines.
Suspension
Transmission Festive Gjinder Stoke—Fromt 318mm 125m
foward TOSkmhBSaph fective Cylinder Svoke—Reor 15mm __65in
Forward? TAS kh 89 mph ear Adie Oseilation oF
Forward TeSkn/h —_TEmph
Forwards Bm —_Te2 mph
Forward BS kmh__ AS mph
Forward ‘bk __BAmph
Forward? Se koh 38S mph
Reverse TSkwh 74 mph
‘+ Maximum travel speeds with standard 27.00-48 tires,Sound
Approximate Weights — Dual Slope
Emp venice BeTkg 2ST
Chass 0g TOT
Body T6OVORS— 3EAZBIb
Service Refill Capacities
uelTank TTL si gar
Cooking Sytem TEL Ti al
Grankeass 1 24a
Diforonnals and ral Drives 3061 er gal
‘Steering Tank 40 Vogal
Torque Converer/Brake7 250166 gl
Hoist Hydraulic Tank
Torque Converter” EL eal
Transmission Tank
Tires
Standard Tire 27.00-RAS [EAI Tire
+ Productive capabilities of the 777D truck are such that,
under certain ob conditions, TKPH (TMPH) capabilities of
standard or optional tires could be exceeded and, therefore,
limit production
* Caterpillar recommends the customer evaluate all job
conditions and consult the tire manufacturer for proper
tire selection,
ROPS
ROPSFOPS Standards ‘SAE T1040 MAYS
180 3471:1997
+ ROPS (Rollover Protective Structure) for cab offered by
Caterpillar meets SAE J1040 MAY and ISO 3471:1997
Level Il ROPS criteria,
Sound Standards ‘ANSI/SAE J1166 MAYS,
SAE J88 JUNG
+ The operator sound exposure Leq {equivalent sound
pressure lovel) measured according to work cycle
procedures specitiod in ANSI/SAE J1166 MAY90 is 78 dB(A}
for cab offered by Caterpillar, when properly installed and
‘maintained and tested with doors and windows closed
+ The exterior sound pressure level forthe standard machine
measured at a distance of 15 m (49 ft) according tothe test
procedures specified in SAE J88 JUNG, mid-gear moving
‘operation is 90 dB(A)
‘+ Hearing protection may be needed when operating with
‘an open operator station and cab (when not properly
maintained or daors/windows open) for extended periods.
or in a noisy environment,
ring
Stooring Standards SAE JIT OCTAO,
180 5010:19921)
+ Turning diameter on front wheel track with standard tres:
25.3 m (831
‘+ Machine clearance turning circle: 284 m (93 ft in).
+ Stooring anglo, loft or right: 30.5 dagroes.
+ Separate hydraulic system prevents cross contamination
TT1D Off-Highway Truck specifications 19