This document is a mill test certification for ASTM A325 Type 1 heavy hex structural bolts. It provides the chemical composition, dimensions, surface properties, and mechanical properties test results of the bolts. The bolts met the specifications for chemical composition, dimensions, appearance, coating, hardness, tensile strength, elongation, reduction of area, and decarburization depth. The certificate confirms that 30,600 bolts from heat number G320002252 passed all tests and meet the purchase order requirements.
This document is a mill test certification for ASTM A325 Type 1 heavy hex structural bolts. It provides the chemical composition, dimensions, surface properties, and mechanical properties test results of the bolts. The bolts met the specifications for chemical composition, dimensions, appearance, coating, hardness, tensile strength, elongation, reduction of area, and decarburization depth. The certificate confirms that 30,600 bolts from heat number G320002252 passed all tests and meet the purchase order requirements.
This document is a mill test certification for ASTM A325 Type 1 heavy hex structural bolts. It provides the chemical composition, dimensions, surface properties, and mechanical properties test results of the bolts. The bolts met the specifications for chemical composition, dimensions, appearance, coating, hardness, tensile strength, elongation, reduction of area, and decarburization depth. The certificate confirms that 30,600 bolts from heat number G320002252 passed all tests and meet the purchase order requirements.
Supplier: HISENER INDUSTRIAL CO., LTD Certificate No.: MTCI 8030701023009 Invoice No.: 18HS03070F Product ASTM A325 TYPE 1, HEAVY HEX STRUCTURAL BOLT UNC - FULL THREAD - MARK "MSK" Description: 1/2-13 x 2"Shipped Qty: 30.600 MPCS Product Size: ASME B18.18/ASTM F1470 Lot No.: Ll 8030700831009 Quality Acceptance: SWRCH35K Heat NO.: G320002252 RAW MATERIAL Element cu s Spec. 0.32 0.38 0.10 0.60 0.035 0.030 max 0.35 0.90 max Result 0.34 0.15 0.71 0.003 0.008 SURFACE & THREAD Test Item Standard Remark Test Item Standard Remark Appearance Flawless ASTM F78B OK Go gauge 0K ASME Bl .1 Coating HDG ASTM F2329 OK NO Go gauge 2A OK DIMENSION MEASUREMENT UNIT: MM Accordin to : ASME B18.6.2
Test Item Spec. Sampling Remark NOTE
MAJOR DIAMETER (D) 124. 12.65 80 OK SHANK DIAMETER (ds) 12.3 12.7 80 OK WIDTH ACROSS FLATS (s) 21 .6 22 2 80 OK WIDTH ACROSS CORNERS (e) 24.63 80 OK HEIGHT OF HEAD (k) 7.72 8.16 80 OK LENGTH(L) 47.75 50.80 80 OK LENGTH OF THREAD (b) 32.0 min 80 0K MACHANICAL PROPERTIES Accordin to : ASTM A325
Test Item Spec. Sampling Remark NOTE
TENSILE STRENGTH Rm (Mpa\Ksi) min 120 Ksi 3 OK HARDNESS (HR/HV) HRC 25 HRC 34 8 OK ELONGATION (A%) min 14 3 OK REDUCTION OF AREA (Z%) min 35 OK NON-DECARBRURIZATION OF THREAD (E) min 0.0 mm 8 OK COMPLETE DECARBURIZATON OF THREAD max 0.0 mm 8 OK (G) We hereby certify that all the above material were manufactured , sampled, tested, and tion and any supplementary requirements or other requirements designated in the purchase order