Professional Documents
Culture Documents
JDM A24 Spec For Electric-Resistance Welded Steel Mechanical Tubing
JDM A24 Spec For Electric-Resistance Welded Steel Mechanical Tubing
= JDM A24
Specification for Electric-Resistance-Welded
Steel Mechanical Tubing
TABLE OF CONTENTS
,,
Page
SCOPE ................................................................................... 2
DESIGNATIONS .......................................................................... 2
REQUIREMENTS .......................................................................... 2
REFERENCES ............................................................................. 5
—------ . . . .
Fht Issued: Feb 52 Revised: Aug 84 l’ermCodtx 7960-00 Design Control: DT Page: 1 of 5
Superaedax Jun 69.
Readws are rermmdad IFSI the mfomnehon and Ideas ctmwyad in Ilw Slawrd, os WI -S IM @@ICSl tiurnanI itself, are the pr~rly of Deere & Company This maler!a! si?w$d co: be
&wl~ WIS* cl 1~ ~rporal~ wlhusl aullmrmatkm,
Oaare & Q3(5Wny EwnaeIIng Slandafd9 OS@ IIMOnt Jolwr Oaare W Mine, Ii!ids 61265 CqyrI@I C) 19S4 by Deere & Cc+mpany Lilho m U.S A.
1-
.. . .—
M W80J”4b” OO05b87 8“75”h
JDM A24
1. SCOPE
JDM A24 specifies the standard requirements of electric resistance welded steel round, square, rect-
angular, and special shape mechanical tubing made from hot rolled or cold rolled carbon or alloy steel
of the types shown in Table 1.
JDM A24 Annex A provides information on sizes and shapes for which the dimensional tolerances are
specified.
JDM A24 Annex B provides information on availability of the newest types, JDM A24C and A24F.
2. DESIGNATIONS
2.1 TYPE”. The type and flash condition of tubing conforming to this specification are designated by
the JDM number shown in Table 1.
2.2 COMPOSITION. If a specific composition is required, the grade designation from ASTM A513
(ASTM A512 for JDM A24C and A24F) is shown following the type designation.
2.3 THERMAL TREATMENT. If a final thermal treatment is required, the treatment is shown follow-
ing the composition grade designation.
Examples: JDM A24B3 (MT 1020 Normalized) or JDM A24B3 (MT 1020 NORM)
Examples: JDM A24B4 (1 026 Stress Relieved) or JDM A24B4 (1 026 SR)
3. REQUIREMENTS
Unless otherwise specified, the standard requirements of the latest relevant ASTM standard shall
apply for all points not taken up in this JDM specification. Supplementary and special requirements,
if any, shall be as specified.
3.1 CHEMICAL COMPOSITION. The heat analysis or the product analysis, and the methods used
for analysis, shall be reported to the purchaser,
3.1.1 JDM A24A, A24B, A24D and A24E. The chemcial composition shall conform to ASTM A513.
If no grade is specified, grades MT 1010 to MT Xl 020 or 1010 to 1026 maybe furnished at the option
of the supplier.
3.1.2 JDM A24C and A24F. The chemical composition shall conform to ASTM A512. Unless other-
wise specified, grade 1020 shall be furnished.
-2-
.. 4,.,., ,.,,, ,., ,,
... ,. --.4 .,,..... - . .
. . . . .- . . . . . . .
;“-n
f== ~R@’ED
~ SUPPLIER
FOR
DIST. ~
JDM A24
A24C Normalized & Sink Drawn conforming to ASTM A5~ 2 except for
electric resistance weld and mechanical properties
ASTM A513 Type 3 Sink Drawn from Hot Rolled Steel, S. D.H.R.
A24D1 A24AI C ● Flash-In
A24D2 A24A2C ● Flash Controlled to 0.25 mm (0.01 O in) Max
A24D3 A24A3C . Flash Controlled to 0.13 mm (0.005 in) Max
ASTM A513 Type 4 Sink Drawn from Cold Rolled Steel, S. D.C.R.
A24E1 A24B1 C ● Flash-In
A24E2 A24B2C ● Flash Controlled to 0.25 mm (0,01 O in) Max
A24E3 A24B3C ● Flash Controlled to 0.13 mm (0.005 in) Max
-3-
.. . . .
ES 47190J9h 0005L87 hqd ii
.
JDM A24
-
3. REQUIREMENTS (continued)
3.2.1 JDM A24A, A24B, A24D and A24E. Unless otherwise specified, the tubing is to be furnished
with no final thermal treatment.
3.2.2 JDM A24C and A24F. Unless otherwise specified, the tubing may be furnished unannealed
or stress relieved.
3.3 MECHANICAL PROPERTIES OF ROUND TUBING. The test data and the methods of testing for
required mechanical properties shall be reported to the purchaser.
3.3.1 JDM A24A, A24B, A24D and A24E. Round tubing with specified composition grade shall con-
form to the tensile requirements (and not necessarily the hardness limits) shown in ASTM A513 for
the specified type, grade, and condition.
3.3.2 JDM A24C and A24F. Grade 1020 round tubing, either unannealed or stress relieved, shall
meet or exceed the following minimum mechanical properties.
3.4 ENDS OF ROUND TUBING. Unless otherwise specified, round tubing shall have square cut ends
within the tolerance for squareness of cut specified in ASTM A513, and shall have burrs removed from
one end.
3.5.1 JDM A24A, A24B, A24D and A24E. Round, square and rectangular tubing shall conform to
the permissible variations in dimensions specified in ASTMA513. For round JDM A24A or A24B tubing
with specified intermediate wall thickness, the wall thickness tolerance shown for the next thicker
standard wall shall apply. For special shape tubing, and for tubing outside the size range specified in
ASTM A513, the dimensional limits shall be as agreed between the purchaser and the supplier,
3.5.2 JDM A24C and A24F. Round, square and rectangular tubing shall conform to the permissible
variations in dimensions specified in ASTM A512. For special shape tubing, the dimensional limits
shall be as agreed between the purchaser and the supplier.
3.6 PROTECTIVE COATING. Unless otherwise s~ecified, the tubing shall be coated to prevent ex-
cessive rusting for 100 hours when tested per ASTM D1 748. The coating shall be removable by an
alkaline or organic solvent cleaner.
4. REFERENCES
ASTM A512 Standard Specification for Cold Drawn Butt Weld Carbon Steel Mechanical
Tubing
ASTM A513 Standard Specification for Electric-Resistance-Welded Carbon and Alloy Steel
Mechanical Tubing
ASTM D1 748 Test Method for Rust Protection by Metal Preservatives in the Humidity Cabinet
-5-
.
I