Professional Documents
Culture Documents
Farmer Ted: Difficulty: Advanced Beginner U.S. Terminology
Farmer Ted: Difficulty: Advanced Beginner U.S. Terminology
Farmer Ted: Difficulty: Advanced Beginner U.S. Terminology
thecozychipmunk.com/2018/09/24/farmer-ted
Just in time for the fall harvest comes Farmer Ted! He’s spent the spring
and summer plowing the fields and tending to his crops. He’ll point you in
the direction of the best pumpkin in the patch, but you might need to help
him lift it, he’s awfully tiny after all!
U.S. Terminology
1/13
Materials
Hook: 3.5 mm
Yarn: Worsted Weight: Approx. 100 yards- Fur Colour, Brown, Orange, small
amount of green and white (I used Impeccable by Loops and Threads)
Polyfill
Needle
Optional: Stitch Markers and pins, embroidery thread for overalls stitching,
ribbon and buttons
Other Notes:
Magic Ring alternative- if you do not feel comfortable doing a magic ring,
you can also chain 2 and work the indicated number of stitches into the first
chain
Pumpkin Stuffing: When stuffing the pumpkin, don’t stuff it too firmly
otherwise it will be hard to shape!
Body Stuffing– The hat and overalls are written to fit a head and body hat is
stuffed firmly. I suggest stuffing both, waiting a while then stuffing more.
Polyfill will naturally deflate over time, making your previously firm body
soft.
2/13
Colour Change– When changing from one colour to another, in your final SC
stitch after you have 2 loops on your hook, pull through with your new
colour. In the next stitch of the next row, a SL ST is worked as it creates a
more seamless colour change that is not as obvious.
Pattern:
Muzzle:
FO, leaving a long tail for weaving. Stitch on nose and mouth in shape that
you prefer. See full body below for nose and mouth stitching.
Head:
Start stuffing and continue stuffing for subsequent rounds (make sure it is
firm)
Pin muzzle between safety eyes, with the top of the muzzle in line with the
top of the eyes. Sew to the head and weave in ends.
Body:
Start stuffing, making sure to stuff firmly as you finish subsequent rounds
4/13
FO, leaving a long tail for sewing to the head. There should be the same
number of stitches (12) at the top of the body as the bottom of the head.
Line the stitches up and using a needle sew the head and body together.
Weave in ends.
Arms: (make 2)
R1: 5 SC in MR (5 st)
Overalls:
R1: 6 SC in MR (6 st)
R10: Row 10 is broken into segments to more easily follow along. Depending
on how firmly you stuffed your bear body, you may need to adjust up or down
the length of your suspenders. Check when chaining to see if they are the
5/13
correct length and adjust accordingly.
-Front Flap: 6 SC, CH1, turn. Repeat 4 more times, skipping the last CH1,
turn. SL ST down side of overall (we will later SL ST up the other side of the
overall so it looks even)
-Sides and Suspenders: 10 SC. CH 16, SC into second CH from hook and
down the remaining CH’s. SC into same stitch as the last stitch you made
before starting the first suspender. 5 SC. CH 16, SC into second CH from
hook and down the remaining CH’s. SC into same stitch as the last stitch
you made before starting the second suspender. 9 SC.
-Front Flap 2: You should now have reached the other side of the overall,
just before the front flap. SL ST up the remaining side of the overall and FO,
leaving a long tail for sewing the overalls to the body.
Overalls attachment
Before sewing on your overalls, if you want to add any embroidered details
such as pockets, do this first.
Pin your overalls in place, making sure the front flap is lined up evenly with
the front of your bear’s face. Make sure that when your suspenders cross
over the shoulders, they can reach the front flaps. Using a needle and yarn,
weave in and out every few stitches to attach to the body, working all the
way around the body.
Cross the suspenders over the back of the bear, pinning to the top of each
corner of the front flap. Sew in place using leftover yarn and weave in ends.
Add optional buttons using embroidery thread.
6/13
Legs: (make 2)
R1: 6 SC in MR (6 st)
Stuff at base of foot, and continue to lightly stuff up to halfway up the leg
Pin the legs to the base of the body and sew on. Make sure when sewing to
go through both the overall and actual body so it is well secured. Weave in
ends.
Tail:
7/13
Hat:
SL ST to 1st stitch of previous row. FO, leaving a long tail for sewing to the
head.
Using the yarn tail, sew up under the hat, coming out around row 10/11. Pin
the hat to the head in a position that you like. Using the yarn tail and needle,
sew in and out every few stitches. Sew close to the natural lines made from
working in the BLO so your stitches are not obvious. Be careful not to pull
too tight on the yarn so it does not make indentations in the hat. Weave in
ends.
Ears: (make 2)
FO, leaving tail of yarn for sewing. Flatten ears and pin to each side of the
hat, giving them a bit of a curve. Sew ears to hat, making sure to go through
8/13
both the hat and head so that they are firmly secured.
Pumpkin:
Start stuffing, making sure to not stuff too firmly so that you can shape the
pumpkin later (stiffer yarn will need even less stuffing)
FO, leaving long tail. Pull the yarn with a needle through the centre of the
pumpkin, around the outside of the pumpkin and down through the centre
again. Pull the yarn tight, creating an indentation. Repeat several times until
you have the number of indentations that you would like (I made 5). Run the
yarn and needle up and down through the centre several more times so the
yarn is secured and your indentations won’t come loose. Weave in ends.
Stem:
10/13
Thank you so much for making this pattern! If
you run into any problems or have any
questions, please do not hesitate to contact
me through Facebook or Instagram! Please
remember to tag me @thecozychipmunk
#thecozychipmunk so I can see your
completed creation! You can also add Farmer
Ted to your Ravelry projects here
11/13
12/13
13/13