Professional Documents
Culture Documents
Slim Line: Motion Detectors
Slim Line: Motion Detectors
Motion detectors
www.satel.eu
SLIM LINE | MOTION DETECTORS
SLIM LINE is a line of PIR and dual-tech (PIR + MW) motion detectors
PIR motion detectors
SLIM-PIR / SLIM-PIR-PET
• EN 50131 Grade 2 compliance • detector configuration: on-board potentiometer • pet immunity function (SLIM-PIR-PET)
• sensitivity adjustment • detection area: • built-in EOL resistors: 1.1 kΩ
• selectable LED indicator color » 15 m x 20 m, 90° (SLIM-PIR)
(4 colors available) » 12 m x 13 m, 90° (SLIM-PIR-PET)
• remote LED indicator enable/disable
SLIM-PIR-LUNA / SLIM-PIR-LUNA-PET
• EN 50131 Grade 2 compliance • detector configuration: • pet immunity function (SLIM-PIR-LUNA-PET)
One enclosure, • sensitivity adjustment » on-board buttons • integrated cover for electronics board
many devices • possibility to switch between two specified » OPT-1 keyfob protection
sensitivity levels (SENS terminal) • detection area: • plug-in terminal block – dismounting
Elegant, slim
• selectable LED indicator color (7 colors available) » 20 m x 24 m, 90° (SLIM-PIR-LUNA) of electronics without unscrewing
enclosure is made • remote LED indicator enable/disable » 12 m x 13 m, 90° (SLIM-PIR-LUNA-PET) wire terminals
of high quality plastic. • creep zone protection (SLIM-PIR-LUNA) • built-in EOL resistors: 1.1 kΩ, 4.7 kΩ, 5.6 kΩ
• additional white LED illumination
» possibility of remote control or activation
Uniform appearance by movement detection
of all detectors
installed in the SLIM-PIR-PRO
• EN 50131 Grade 3 compliance • detector configuration: • integrated cover for electronics board
premises makes
• active IR antimasking (with delay: 1 s / 60 s) » on-board buttons protection
it difficult for an » OPT-1 keyfob
• sensitivity adjustment • plug-in terminal block – dismounting
intruder to identify • selectable LED indicator color (7 colors available) • detection area: 20 m x 24 m, 90° of electronics without unscrewing
the specific model • remote LED indicator enable/disable • creep zone protection wire terminals
• built-in EOL resistors: 1.1 kΩ, 4.7 kΩ, 5.6 kΩ
used in the system
because all of them Dual-tech motion detectors (PIR+MW)
look the same.
SLIM-DUAL / SLIM-DUAL-PET
• EN 50131 Grade 2 compliance • detector configuration: on-board • pet immunity function (SLIM-DUAL-PET)
• individual adjustment of PIR potentiometers • built-in EOL resistors: 1.1 kΩ
and MW sensors sensitivity • detection area:
• selectable LED indicator color for alarm » 15 m x 20 m, 90° (SLIM-DUAL)
signaling (4 colors available) » 12 m x 13 m, 90° (SLIM-DUAL-PET)
• remote LED indicator enable/disable
SLIM-DUAL-LUNA / SLIM-DUAL-LUNA-PET
• EN 50131 Grade 2 compliance • remote LED indicator enable/disable • creep zone protection (SLIM-DUAL-LUNA)
• individual adjustment of PIR • additional white LED illumination • pet immunity function (SLIM-DUAL-LUNA-PET)
and MW sensors sensitivity » possibility of remote control or activation • integrated cover for electronics board
• selectable operation modes: PIR+MW, by movement detection protection
PIR or MW • detector configuration: • plug-in terminal block – dismounting
• possibility to switch between two: » on-board buttons of electronics without unscrewing
levels of sensitivity and operation modes » OPT-1 keyfob wire terminals
(SENS terminal) • detection area: • built-in EOL resistors: 1.1 kΩ, 4.7 kΩ, 5.6 kΩ
• selectable LED indicator color » 20 m x 24 m, 90° (SLIM-DUAL-LUNA)
(7 colors available) » 12 m x 13 m, 90° (SLIM-DUAL-LUNA-PET)
SLIM-DUAL-PRO
• EN 50131 Grade 3 compliance • remote LED indicator enable/disable • integrated cover for electronics board
• active IR antimasking • detector configuration: protection
(with delay: 1 s / 60 s) » on-board buttons • plug-in terminal block – dismounting
• individual adjustment of PIR and MW sensors » OPT-1 keyfob of electronics without unscrewing
sensitivity • detection area: 20 m x 24 m, 90° wire terminals
• selectable LED indicator color • creep zone protection • built-in EOL resistors: 1.1 kΩ, 4.7 kΩ, 5.6 kΩ
(7 colors available)
SLIM LINE | MOTION DETECTORS
MW sensor
PIR sensor
WD CT LR
1 Practical enclosure
opening / closing mechanism
You can open the enclosure with a flat tip screwdriver, 90°
CLICK
while no tools are required to close it.
EOL resistors
2 Plug-in terminal block
The LUNA and PRO versions come with a plug-in terminal block.
When removing the electronics board, you do not have to unscrew
the wire terminals. It also allows you to quickly change the detector model.
The LUNA and PRO models are additionally provided with resistors for faster installation LUNA PRO
in systems based on other types of control panels (4.7 kΩ, 5.6 kΩ). Plug-in terminal block
Remote configuration
A very useful feature for the installer, available in the LUNA and PRO models, is the ability to remotely
change the detector operating parameters using the OPT-1 keyfob. Thus, the settings (including sensor
sensitivity, operating mode, indicator light and LED lighting) can be changed easily, without having to open
the detector enclosure each time. 20°