Vendor: Exam Code: Exam Name:: Dell Des-1241 Specialist - Platform Engineer, Powerstore Demo

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 7

Vendor:Dell

Exam Code:DES-1241

Exam Name:Specialist - Platform Engineer,


PowerStore

Version:Demo
QUESTION 1

During Dell EMC PowerStore startup, both appliance nodes have rebooted in service mode. What must be done first to
avoid management software conflicts?

A. Reboot node B

B. Clear the boot mode

C. Disable node B boot mode

D. Return node A to normal mode

Correct Answer: D

Reference: https://www.dell.com/support/manuals/pk/en/pkbsd1/powerstore-1000/pwrstr-isg/power-control-procedure-
considerations?guid=guid-4352c94e-0ae7-4a2e-8593-9ae135bb9e34andlang=en-us

QUESTION 2

What describes Dell EMC PowerStore X power down?

A. PowerStore X node, appliance, or cluster power down is done entirely with vCenter server commands

B. Powering down a PowerStore X node, appliance, or cluster is done in the same manner as a PowerStore T

C. PowerStore X node, appliance, or cluster power down utilizes the VSi plugin to perform the needed vCenter server
operations

D. Powering down a PowerStore X node, appliance, or cluster requires additional vCenter server commands

Correct Answer: D

QUESTION 3

A Storage Administrator has just installed PSTCLI on a Linux client. The administrator is unfamiliar with the PSTCLI
command list. How can the administrator get a list of all PSTCLI commands from the cli> prompt?

A. Type the +keys together

B. Press the key

C. Use the show all command

D. Use the help all command

Correct Answer: B

QUESTION 4
Refer to the exhibit.

A Storage Administrator is troubleshooting a Dell EMC PowerStore T hardware issue. They observe that the base
enclosure LED circled is blue. What does this indicate?

A. Base enclosure hardware is operating normally

B. Base enclosure has a component hardware fault

C. Cluster has only a single appliance

D. Appliance has a node in service mode

Correct Answer: A

Reference: https://www.dell.com/support/manuals/pk/en/pkbsd1/powerstore-9000t/pwrstr-isg/embedded-module-
leds?guid=guid-bc07892c-75cf-43b6-8f17-8a4c49001aebandlang=en-us

QUESTION 5

What is the maximum number of expansion enclosures that a single Dell EMC PowerStore appliance supports?

A. 2

B. 3

C. 4

D. 6

Correct Answer: B

Reference: https://www.dellemc.com/resources/en-us/asset/data-sheets/products/storage/h18143-dell-emc-powerstore-
family-spec-sheet.pdf (1)

QUESTION 6

A Storage Administrator wants to upgrade a two appliance Dell EMC PowerStore cluster. Which Commit options need
to be chosen to have all appliances upgraded in the last step?

A. Appliance, Cluster

B. Appliance, Appliance

C. Cluster, Appliance
D. Cluster, Cluster

Correct Answer: B

QUESTION 7

DRAG DROP

Match the correct non-disruptive upgrade process step (answer column) with the correct sub-step (match column).

Select and Place:

Correct Answer:
QUESTION 8

When planning for a Dell EMC PowerStore T implementation, how many IP addresses are required for the storage
network?

A. 2

B. 1

C. 3

D. 4

Correct Answer: C

Reference: https://topics-cdn.dell.com/pdf/pwrstr-ntwk-plang_en-us.pdf (22)

QUESTION 9

Under which condition does the Dell EMC PowerStore equipment in the rack require additional stability?

A. Low temperatures

B. Unstable humidity

C. Unstable environments

D. High temperatures

Correct Answer: C

QUESTION 10

What are the recommended number of network switches in a Dell EMC PowerStore T environment?

A. 1

B. 2

C. 3

D. 4

Correct Answer: A

Reference: https://www.dell.com/support/manuals/pk/en/pkbsd1/powerstore-9000t/pwrstr-ntwk-plang/powerstore-t-
model-appliance-networks?guid=guid-97a3e988-c1bc-4f51-a445-3af23f19da1bandlang=en-us

QUESTION 11
Which Dell EMC PowerStore model reserves the last two slots of the base enclosure for NVMe NVRAM?

A. 3000

B. 5000

C. 7000

D. 9000

Correct Answer: A

Reference: https://www.dellemc.com/en-us/collaterals/unauth/white-papers/products/storage/h18241-dell-emc-
powerstore-best-practices-guide.pdf (9)

QUESTION 12

What does the command "svc_journalctl | grep `Mar 25 23:00\\'" do?

A. Ignores log messages from the specified date

B. Retrieves log messages from the specified date

C. Deletes all logs before the specified date

D. Rotates the log based on the specified date

Correct Answer: B
To Read the Whole Q&As, please purchase the Complete Version from Our website.

Try our product !

100% Guaranteed Success

100% Money Back Guarantee

365 Days Free Update

Instant Download After Purchase

24x7 Customer Support

Average 99.9% Success Rate

More than 800,000 Satisfied Customers Worldwide

Multi-Platform capabilities - Windows, Mac, Android, iPhone, iPod, iPad, Kindle

Need Help
Please provide as much detail as possible so we can best assist you.
To update a previously submitted ticket:

Any charges made through this site will appear as Global Simulators Limited.
All trademarks are the property of their respective owners.

Powered by TCPDF (www.tcpdf.org)

You might also like