This document provides guidance on safely operating bench grinders. It outlines procedures for machine details like displaying RPM and emergency stop buttons. It also covers guarding, ensuring guards are fixed and replaced after maintenance. Rest brackets must be properly secured and maintained with a 3mm gap from the wheel. Only trained workers should operate grinders after receiving instruction. Appropriate personal protective equipment like face shields must be provided and worn. Worn abrasive wheels should be replaced and dropped or cracked wheels must not be used.
This document provides guidance on safely operating bench grinders. It outlines procedures for machine details like displaying RPM and emergency stop buttons. It also covers guarding, ensuring guards are fixed and replaced after maintenance. Rest brackets must be properly secured and maintained with a 3mm gap from the wheel. Only trained workers should operate grinders after receiving instruction. Appropriate personal protective equipment like face shields must be provided and worn. Worn abrasive wheels should be replaced and dropped or cracked wheels must not be used.
This document provides guidance on safely operating bench grinders. It outlines procedures for machine details like displaying RPM and emergency stop buttons. It also covers guarding, ensuring guards are fixed and replaced after maintenance. Rest brackets must be properly secured and maintained with a 3mm gap from the wheel. Only trained workers should operate grinders after receiving instruction. Appropriate personal protective equipment like face shields must be provided and worn. Worn abrasive wheels should be replaced and dropped or cracked wheels must not be used.
GN # 12 – Bench Grinders Ports, Customs & Free Zone Corporation
DETAILS OF MACHINE GURADING REST BRACKETS
RPM to be displayed on the Ensure that the guard is fixed to Rest bracket should be properly machine. the machine. secured & must be adjustable. Emergency stop button must be Guard must be replaced after Maintain a gap of 3mm located on the machine. carrying out any maintenance between the rest bracket and the Keep the area around machine work if any. face of abrasive wheel. clear of all materials. Cover the abrasive wheels after Keep the rest bracket in Keep the machine switched off work is completed. horizontal position. when not in use.
ABRASIVE WHEELS SAFETY NOTICES / PPE TRAINING & USE
Select the correct wheel for Display safety notices in the Provide appropriate training to the job to be grinded. languages easily understood by the workers. Ensure that the safe peripheral the operators. Do not apply excessive pressure speed of the wheel is not Display names of the operators on to the wheels. exceeded. authorized to operate the Never grind on sides of the Abrasive wheels shall be machine. wheel. mounted, balanced & dressed by It is the responsibility of the Do not try to stop the rotating trained and experienced person. contractor to provide wheel by hand. Ensure that wheels are mounted appropriate PPE like face shield Any person mounting, using washers / blotters. or safety goggles. balancing or dressing an Do not use wheels that have been Area supervisors will ensure abrasive wheel must be trained dropped or cracked. It should that the operator uses the issued & appointed in writing. give clear ringing sound. PPE. Worn out wheels must be replaced immediately.