Professional Documents
Culture Documents
Airbag Steering Wheel Module Replacement
Airbag Steering Wheel Module Replacement
3. Using a blunt-ended tool, push the spring fastener inward through the access hole (1) located
on the rear of the steering wheel by pulling the tool outwards.
4. Keeping the tool inserted, repeat the step for other opening.
5. Keeping the upper step pull the steering wheel inflatable restraint module out of the steering
wheel.
© 2019 General Motors. All rights reserved.
https://gsi.ext.gm.com/gsi/showDoc.do?pubCellSyskey=5579547&from=sm&cellId=57810&doc... 07/03/2019
Document ID: 2510500 Página 2 de 2
Installation Procedure
2. Align the steering wheel module fasteners to the steering column fastener holes.
Warning: After installation of the steering wheel airbag module to the steering wheel, slightly
pull the module outward. If there is no give on the airbag module then it is secured
correctly. If the airbag module is not fully attached personal injury could result.
3. Push the steering wheel module (1) firmly into the steering column in order to engage the
fasteners.
4. Enable the SIR system. Refer to SIR Disabling and Enabling.
5. Refer to Inflatable Restraint Module Handling and Scrapping.
https://gsi.ext.gm.com/gsi/showDoc.do?pubCellSyskey=5579547&from=sm&cellId=57810&doc... 07/03/2019