Professional Documents
Culture Documents
USA Catalog DWKL
USA Catalog DWKL
JEREMIAS CONTENTS
DW - Double-wall chimneys
Introduction 3-4
Installation instructions 8
DW-KL Products 9 - 56
Adapters 9
Supports 12
Straight lengths 15
Adjustable lengths 17
Elbows 20
Tees 24
Grease tees 27
Wye tees 29
Tee caps 31
Increasers 32
Reducers 38
Flashings 44
Terminations 47
Accessories 54
Offset tables 57
Sample systems 59
Warranty statement 64
Notes 65
2
INTRODUCTION
JEREMIAS
EXHAUST SYSTEMS
Jeremias Models DWKL and SWKL are factory built stainless steel venting systems for various types of appliances. The
Model DWKL is Double Wall and Model SWKL is Single Wall. The KL is derived from the original spelling of Konical, for
the Conical Joint. Each may be intermixed in the same vent system assuming proper clearances and other installation
guidelines are maintained for each system.
All DWKL Models and variations are intended for use in exhausting various appliances to the outdoors. There are also
many other applications and uses including, but not limited to the following: boiler stacks, engine exhausts, turbines,
commercial kitchen exhausts, grease ducts, pizza ovens, coffee roasters, chimney liners, fireplace chimneys, laundry dryer
vents, fume venting, industrial oven and process stacks, incinerator exhausts, paint booth exhausts, particle conveying,
chutes, and ventilation ducts.
With over 40 years of experience in the venting and component exhaust industries, Jeremias has seven (7) manufacturing
plants in six (6) different countries worldwide. Jeremias today has more than 1,000 employees and is proud of its German
engineering origins, and fortunately is now also manufactured in the USA from 100 % local materials!
Here is North America, Jeremias Inc. focuses primarily on high pressure exhaust systems for commercial and industrial
applications.
3
INTRODUCTION
JEREMIAS
EXHAUST SYSTEMS
Opened in 2013, the Jeremias R&D Lab in Logan, OH has the industry’s most experienced lab technicians on staff and
incorporates the latest equipment and technologies. This laboratory enables Jeremias to provide industry leadership
with a continued focus on new factory-built exhaust applications and unique listings. Jeremias is constantly bringing new
innovations to the marketplace and our Logan laboratory enables us to accomplish these changes quickly and effectively.
4
TECHNICAL SPECIFICATIONS
TECHNICAL
SPECIFICATIONS
Model and Part Identifications Outer Jacket:
DWKL, Double Wall, universal, for all applications > 0.025” thick Type 304 stainless steel ; 3”Ø through 18”Ø
(5ӯ-36ӯ) Available in many thicknesses of insulation
Insulation:
DWKL-Lt, Double Wall Light, universal, for all applications
(3”Ø-18”Ø) SuperWool- 1.5” blanket 8 PCF Fiber compressed to 1.25”
thick (9.6 PCF net effective)
DWKL-Rx, Double Wall, Roxul, for 1200°F Max applications
(5ӯ-36ӯ) Available in many thicknesses of insulation
DWKL- Rx
DWKL-Vt, Double Wall Vent, Roxul Insulation, for 1200°F
Max applications (3ӯ-18ӯ) Inner Liner:
Example 1: > 0.035” thick Type 444 stainless steel ; 5”Ø through 36”Ø
(under 5ӯ use -Vt)
DWKL8-36L for an 8 inch diameter Model DWKL double
wall, 36 inches in length Outer Jacket:
Example 2: > 0.025” thick Type 304 stainless steel ; 5”Ø through 24”Ø
DWKL12-90BT-Vt for a 12 inch diameter Model DWKL-Vt > 0.035” thick Type 304 stainless steel ; 26”Ø through 36”Ø
double wall 90 degree Boot Tee
Insulation:
DWKL- Lt
Inner Liner:
> 0.020” thick Type 444 stainless steel ; 3”Ø through 18”Ø
(over 18ӯ use regular DWKL)
5
TECHNICAL SPECIFICATIONS
TECHNICAL
SPECIFICATIONS
Underwriters Laboratories Listings UL & ULC Listings Matrix:
UL-1738 Special
DWKL-Vt & DWKL - RX Gas Vents with cut mineral wool Gas Vent
ULC-S636 Gas Vent
X X
insulation
Operating Pressures
All Jeremias Inc. models have been evaluated and Listed
by UL for positive pressures up to 90” W.C. internal static
pressure with exposure up to 1400°F internal continuous
temperatures.
6
TECHNICAL SPECIFICATIONS
TECHNICAL
SPECIFICATIONS
Code and Standards Joint Detail
When installed per their instructions, all Jeremias Inc. All Jeremias Inc. models are cylindrical, factory-built,
models are code compliant with the following codes and modular venting systems that incorporate a steel to steel
standards: conical joint and clamp system for quick and easy assembly
in the field.
> NFPA 31 > CMC
> NFPA 37 > CSA-B139 A Jeremias supplied high temperature ceramic lubricating
> NFPA 54 > CSA-B149 and assembly paste is applied on the inner wall conical joint
> NFPA 96 > IMC to assure the best steel to steel connection.
> NFPA 211 > IFGC
> UMC > ULC-S650 The double wall models are insulated with 1½” thick fiber
(compressed to 1¼”) or 1¼” cut mineral wool which allows
The following agencies or associations produce codes, the inner and outer pipes to stay aligned.
standards, or guidelines by which all Jeremias Inc. Models
may be installed and used: Models DWKL/DWKL-Lt/DWKL-Vt Joint Assembly Detail
STEEL TO STEEL
CRITERIA PERMITTED TEMPERATURES SURFACE JOINING
Additional UL-103 Type HT 2100°F (1150°C) for 10 Minutes Further features of the Jeremias double wall insulated
systems include:
UL-2561 1400°F Chimney
ULC/ORD-C959 Industrial
1400°F (760°F) Continuous a) Reduced clearance to combustibles
1800°F (980°C) Intermittent b) Reduced outer pipe skin temperatures
Type 760°C Chimney
c) Reduced building heat gain
500°F (260°C) Continuous
UL-1978 Grease Duct
2000°F (1093°C) for 30 Minutes d) Increased efficiencies of energy recovery systems
e) Reduced noise levels caused by high velocity exhausts
UL-1738 Special Gas Vent f) Enhanced chimney draft
550°F (288°C) Continuous
ULC-S636 Gas Vent
Optional 400°F UL-1738
400°F (204°C) Continuous
Special Gas Vent
Sizing/Pressure Calculations
Optional Plastic (PVC, 148°F (64°C) Continuous for PVC
CPVC, 194°F (90°C) Continuous for CPVC
PP) Special Gas Vent 248°F (120°C) Continuous for PP Jeremias’ engineering uses its own software based upon
the “Chimney, Gas Vent, and Fireplace Systems” chapter
UL-441 Gas Vents of the ASHRAE Handbook to assure that the exhaust and
480°F (249°C) Continuous
ULC-S605 Gas Vents
chimney system is sized in accordance with the appliance
UL-641 Type L Vent manufacturers’ installation instructions.
570°F (300°C) Continous
ULC-S609 Vents Type L
7
TECHNICAL SPECIFICATIONS
SPECIFICATIONS
3“ (76 mm) DNA 3.0 (4.4)
4“ (102 mm) DNA 3.8 (5.7)
5“ (127 mm) 5.3 (7.9) 4.4 (6.5)
6“ (152 mm) 6.3 (9.3) 5.4 (8.0)
7“ (178 mm) 7.2 (10.7) 6.1 (9.1)
Pipe Weight per Foot 8“ (203 mm) 8.1 (12.1) 6.8 (10.1)
9“ (229 mm) 9.1 (13.5) 7.6 (11.3)
The approximate installed weight of the DWKL exhaust
10“ (254 mm) 10.0 (14.9) 8.4 (12.5)
system can be found using this table. This table does
11“ (249 mm) 10.9 (16.3) 9.1 (13.5)
not include accessories such as supports and guides, nor
shipping packaging or palletizing weight (LBS per foot). 12“ (305 mm) 11.9 (17.7) 10.0 (14.9)
13“ (330 mm) 12.8 (19.1) 10.7 (15.9)
14“ (456 mm) 13.8 (20.5) 11.6 (17.3)
KL Paste 16“ (406 mm) 15.6 (23.2) 13 (19.3)
18“ (457 mm) 17.5 (26.0) 14.6 (21.7)
KL Paste is a ceramic lubricating and assembly paste. The 20“ (508 mm) 19.4 (28.8) 16.2 (24.1)
purpose is to help guide the pipe connections to assure the
22“ (559 mm) 21.3 (31.6) 17.8 (26.5)
best steel to steel connection. It also seals the joint
by allowing the ceramic to fill any microscopic steel 24“ (610 mm) 23.1 (34.3) 19.2 (28.6)
imperfections. On fittings it will help the installer rotate to 26“ (660mm) 23.7 (35.3) DNA
the correct position before tapping in place. 28“ (711mm) 25.5 (37.9) DNA
30“ (762mm) 27.2 (40.5) DNA
Use 1 teaspoon of paste per 24” length of joint perimeter.
32“ (812mm) 29.0 (43.2) DNA
Example: 10 inch diameter has 31” of perimeter length, so
use about 1.3 teaspoons per each 10 inch joint connection. 34“ (863mm) 30.7 (45.7) DNA
Below table allows for a 20% waste (About ½” wide smear). 36“ (914mm) 32.5 (48.4) DNA
12345
C lean the inner
U se your hands to
U se the wood plate
I nstall and fix the
F inish
QUICK & EASY INSTALLATION
side of the center both pipes in (supplied with Locking Band (LB). To
female end and the alignment. Connect both shipment) and place it on ensure the connection is
outer side of the pipes and press them the end of the assembly. secure, the Locking Band
NO
male end of each together as much as must be perfectly fitted SI
pipe. Apply the possible by hand. Tap 2-3 times. Make sure in both grooves. GAS LICONE
KL Paste to the to press both inner and SEA KET O
L R
female end. outer pipes together; the (ON ANT US
LY K E D
inner should not be more LUB L PAST
than 1/8” longer than the RICA E
NT)
outer pipe once the
male/female conical
ends are engaged.
8
DWKL PRODUCTS
ADAPTERS
Raw Collar Adapter - Inside - Start / DWKLØ-RCIS Raw Collar Adapter - Inside - End / DWKLØ-RCIE
Ø ØA ØB ØC Ø ØA ØB ØC
3 3 5.5 3 3 5.5
4 4 6.5 4 4 6.5
5 5 7.5 5 5 7.5
6 6 8.5 6 6 8.5
7 7 9.5 7 7 9.5
8 8 10.5 8 8 10.5
9 9 11.5 9 9 11.5
10 10 12.5 10 10 12.5
11 11 13.5 11 11 13.5
12 12 14.5 12 12 14.5
13 13 15.5 13 13 15.5
Ø A-0.315
Ø A-0.315
14 14 16.5 14 14 16.5
16 16 18.5 16 16 18.5
18 18 20.5 18 18 20.5
20 20 22.5 20 20 22.5
22 22 24.5 22 22 24.5
24 24 26.5 24 24 26.5
26 26 28.5 26 26 28.5
28 28 30.5 28 28 30.5
30 30 32.5 30 30 32.5
32 32 34.5 32 32 34.5
34 34 36.5 34 34 36.5
36 36 38.5 36 36 38.5
* Installed length * Installed length
Raw Collar Adapter - Outside - Start / DWKLØ-RCOS Raw Collar Adapter - Outside - End / DWKLØ-RCOE
Ø ØA ØB Ø ØA ØB 0.06
Thickness
3 3 5.5 3 3 5.5
4 4 6.5 4 4 6.5
5
5 5 7.5 5 5 7.5
6 6 8.5 6 6 8.5
7 7 9.5 7 7 9.5
8 8 10.5 8 8 10.5
9 9 11.5 9 9 11.5
10 10 12.5 10 10 12.5
11 11 13.5 11 11 13.5
12 12 14.5 12 12 14.5
0.06
13 13 15.5 Thickness 13 13 15.5
14 14 16.5 14 14 16.5
16 16 18.5 16 16 18.5
18 18 20.5 18 18 20.5
20 20 22.5 20 20 22.5
22 22 24.5 22 22 24.5
24 24 26.5 24 24 26.5
26 26 28.5 26 26 28.5
28 28 30.5 28 28 30.5
30 30 32.5 30 30 32.5
32 32 34.5 32 32 34.5
34 34 36.5 34 34 36.5
36 36 38.5 36 36 38.5
* Installed length * Installed length
9
DWKL PRODUCTS
ADAPTERS
Flange Collar Adapter - Start / DWKLØ-FCS Flange Collar Adapter - End / DWKL-FCE
Ø ØA ØB ØC Ø ØA ØB ØC ti/ta
3 3 5.5 4 3 3 5.5 4
4 4 6.5 5 4 4 6.5 5
5 5 7.5 6 5 5 7.5 6
6 6 8.5 7 6 6 8.5 7
*
*
7 7 9.5 8 7 7 9.5 8
8 8 10.5 9 8 8 10.5 9
9 9 11.5 10 9 9 11.5 10
10 10 12.5 11 10 10 12.5 11
11 11 13.5 12 11 11 13.5 12
12 12 14.5 13 12 12 14.5 13
0.035/0.024
13 13 15.5 14 13 13 15.5 14
14 14 16.5 15 14 14 16.5 15
16 16 18.5 17 16 16 18.5 17
18 18 20.5 19 18 18 20.5 19
20 20 22.5 21 20 20 22.5 21
22 22 24.5 23 22 22 24.5 23
24 24 26.5 25 24 24 26.5 25
26 26 28.5 27 26 26 28.5 27
28 28 30.5 29 28 28 30.5 29
30 30 32.5 31 30 30 32.5 31
32 32 34.5 33 32 32 34.5 33
34 34 36.5 35 34 34 36.5 35
36 36 38.5 37 36 36 38.5 37
* Installed length * Installed length
Fan Plate Adapter - Start / DWKLØ-FPS Fan Plate Adapter - End / DWKLØ-FPE
Ø ØA ØB ØC Ø ØA ØB ØC
3 3 5.5
3 3 5.5 *
4 4 6.5
4 4 6.5
5 5 7.5 * 5 5 7.5
6 6 8.5
6 6 8.5
7 7 9.5
7 7 9.5
8 8 10.5
8 8 10.5
9 9 11.5
9 9 11.5
10 10 12.5
10 10 12.5
11 11 13.5
11 11 13.5
12 12 14.5
12 12 14.5
min Ø A + 3“
13 13 15.5
min Ø A + 3“
13 13 15.5
14 14 16.5
14 14 16.5
16 16 18.5
16 16 18.5
18 18 20.5
18 18 20.5
20 20 22.5
20 20 22.5
22 22 24.5
22 22 24.5
24 24 26.5
24 24 26.5
26 26 28.5
26 26 28.5
28 28 30.5
28 28 30.5
30 30 32.5
30 30 32.5
32 32 34.5
32 32 34.5
34 34 36.5
34 34 36.5
36 36 38.5
36 36 38.5
* Installed length * Installed length
10
DWKL PRODUCTS
ADAPTERS
DWKL to SWKL Adapter / DWKLØ-D2S 125/150 Lb. ANSI Flange - Start / DWKLØ-AFS
Ø ØA ØB ti/ta lb Ø ØA ØB ØC ØD ØE n.holes
0.187
3 3 5.5 6.0
3 3 5.5 6.00 7.50 0.75 4 Thickness
4 4 6.5 7.3
4 4 6.5 7.50 9.00 0.75 8
5 5 7.5 8.6
5 5 7.5 8.50 10.00 0.88 8
6 6 8.5 9.9
6 6 8.5 9.50 11.00 0.88 8
7 7 9.5 11.2 6.40* 7 7 9.5 11.75 13.50 0.88 8
8 8 10.5 12.5
8 8 10.5 11.75 13.50 0.88 8
9 9 11.5 13.8
9 9 11.5 14.25 16.00 1.00 12
10 10 12.5 15.1
10 10 12.5 14.25 16.00 1.00 12
11 11 13.5 16.4
11 11 13.5 16.00 18.00 1.00 12
12 12 14.5 17.7
12 12 14.5 17.00 19.00 1.12 12
0.04 / 0.024
13 13 15.5 19.0
13 13 15.5 18.75 19.00 1.12 12
14 14 16.5 20.3
14 14 16.5 21.25 21.00 1.12 12
16 16 18.5 22.9
16 16 18.5 22.75 23.50 1.25 16
18 18 20.5 25.6
18 18 20.5 22.75 25.00 1.25 16
20 20 22.5 27.7
20 20 22.5 25.00 27.50 1.38 20
22 22 24.5 30.3
22 22 24.5 29.50 32.00 1.38 20
24 24 26.5 32.9
24 24 26.5 29.50 32.00 1.38 20
26 26 28.5 35.4
26 26 28.5 31.50 34.00 1.38 20
28 28 30.5 38.0
28 28 30.5 33.50 36.00 1.38 20
30 30 32.5 40.6
30 30 32.5 35.50 38.00 1.38 20
32 32 34.5 43.1
32 32 34.5 37.50 40.00 1.38 20
34 34 36.5 45.7
34 34 36.5 39.50 42.00 1.38 20
36 36 38.5 48.3
36 36 38.5 41.50 44.00 1.38 20
* Installed length * Installed length
125/150 Lb. ANSI Flange - End / DWKLØ-AFE SWKL to DWKL Adapter / SWKLØ-S2D
Ø ØA ØB ØC ØD ØE n.holes Ø ØA ØB t lb
3 3 5.5 6.00 7.50 0.75 4 3 3 5.5 4.3
11
DWKL PRODUCTS
SUPPORTS
Anchor Support Plate / DWKLØ-APS Heavy Duty Base / DWKLØ-HDB
Ø ØA ØB D Ø ØA ØB C 0.438
Wall Brackets for Support / Ring / DWKLØ-WB Full Angle Ring / DWKLØ-FAR
Ø A B Ø A ØA ØB ØC
3 21.06 11.81 3 5.5 A+1/8 ØA+2.3 ØA +4
12
DWKL PRODUCTS
SUPPORTS
Half Angle Ring / DWKLØ-HAR Light Support Band / DWKLØ-LSB
Ø A ØA ØB ØC Ø ØA
3 5.5 A+1/8 ØA+2.3 ØA +4 3 5.5
0.438
4 6.5 A+1/8 ØA+2.3 ØA +4 0.187 4 6.5
Thickness
5 7.5 A+1/8 ØA+2.3 ØA +4 5 7.5
Guy Wires Band / DWKLØ-GWB Elbow 90° with support leg / DWKLØ-90ES
Ø ØA Ø A B C D E
13
DWKL PRODUCTS
SUPPORTS
Support Base Plate / DWKLØSBP
Ø B C
3 5.5 8.16
4 6.5 9.16
5 7.5 10.16
6 8.5 11.16
7 9.5 12.16
8 10.5 13.16
9 11.5 14.16
10 12.5 15.16
11 13.5 16.16
12 14.5 17.16
13 15.5 18.16
14 16.5 19.16
16 18.5 21.16
18 20.5 23.16
20 22.5 25.16
22 24.5 27.16
24 26.5 29.16
26 28.5 31.16
28 30.5 33.16
30 32.5 35.16
32 34.5 37.16
34 36.5 39.16
36 38.5 41.16
14
DWKL PRODUCTS
STRAIGHT LENGTHS
9“ Fixed Length / DWKLØ-9L 12“ Fixed Length / DWKLØ-12L
Ø ØA ØB C D Ø ØA ØB C D
3 3 5.5 9.0 6.8 3 3 5.5 12.0 9.8
15
DWKL PRODUCTS
STRAIGHT LENGTHS
30“ Fixed Length / DWKLØ-30L 36“ Fixed Length / DWKLØ-36L
Ø ØA ØB C D Ø ØA ØB C D
3 3 5.5 30.0 27.8 3 3 5.5 36.0 33.8
16
DWKL PRODUCTS
ADJUSTABLE LENGTHS
18“ Adjustable Length / DWKLØ-18AL 30“ Adjustable Length / DWKLØ-30AL
Ø ØA ØB Ø ØA ØB
3 3 5.5 3 3 5.5
4 4 6.5 4 4 6.5
5 5 7.5 5 5 7.5
6 6 8.5 6 6 8.5
7 7 9.5 7 7 9.5
8 8 10.5 8 8 10.5
9 9 11.5 9 9 11.5
10 10 12.5 10 10 12.5
11 11 13.5 11 11 13.5
12 12 14.5 12 12 14.5
13 13 15.5 13 13 15.5
14 14 16.5 14 14 16.5
16 16 18.5 16 16 18.5
18 18 20.5 18 18 20.5
20 20 22.5 20 20 22.5
22 22 24.5 22 22 24.5
24 24 26.5 24 24 26.5
26 26 28.5 26 26 28.5
28 28 30.5 28 28 30.5
30 30 32.5 30 30 32.5
32 32 34.5 32 32 34.5
34 34 36.5 34 34 36.5
36 36 38.5 36 36 38.5
* Installed length - range * Installed length - range
18“ Adjustable Length w/Gasket / DWKLØ-18AG 30“ Adjustable Length w/Gasket / DWKLØ-30AG
Ø ØA ØB Ø ØA ØB
3 3 5.5 3 3 5.5
4 4 6.5 4 4 6.5
5 5 7.5 5 5 7.5
6 6 8.5 6 6 8.5
7 7 9.5 7 7 9.5
8 8 10.5 8 8 10.5
9 9 11.5 9 9 11.5
10 10 12.5 10 10 12.5
11 11 13.5 11 11 13.5
12 12 14.5 12 12 14.5
13 13 15.5 13 13 15.5
14 14 16.5 14 14 16.5
16 16 18.5 16 16 18.5
18 18 20.5 18 18 20.5
20 20 22.5 20 20 22.5
22 22 24.5 22 22 24.5
24 24 26.5 24 24 26.5
26 26 28.5 26 26 28.5
28 28 30.5 28 28 30.5
30 30 32.5 30 30 32.5
32 32 34.5 32 32 34.5
34 34 36.5 34 34 36.5
36 36 38.5 36 36 38.5
* Installed length - range (min - max) * Installed length - (min - max)
17
DWKL PRODUCTS
ADJUSTABLE LENGTHS
18“Adjustable Length with Graphite Packing / DWKLØ-18ALG 30“Adjustable Length with Graphite Packing / DWKLØ-30ALG
Ø ØA ØB Ø ØA ØB
3 3 5.5 3 3 5.5
4 4 6.5 4 4 6.5
5 5 7.5 5 5 7.5
6 6 8.5 6 6 8.5
7 7 9.5 7 7 9.5
8 8 10.5 8 8 10.5
9 9 11.5 9 9 11.5
10 10 12.5 10 10 12.5
11 11 13.5 11 11 13.5
12 12 14.5 12 12 14.5
13 13 15.5 13 13 15.5
14 14 16.5 14 14 16.5
16 16 18.5 16 16 18.5
18 18 20.5 18 18 20.5
20 20 22.5 20 20 22.5
22 22 24.5 22 22 24.5
24 24 26.5 24 24 26.5
26 26 28.5 26 26 28.5
28 28 30.5 28 28 30.5
30 30 32.5 30 30 32.5
32 32 34.5 32 32 34.5
34 34 36.5 34 34 36.5
36 36 38.5 36 36 38.5
* Installed length - range (min - max) * Installed length - (min - max)
4 4 6.5 4 4 6.5
5 5 7.5 5 5 7.5
6 6 8.5 6 6 8.5
7 7 9.5 7 7 9.5
8 8 10.5 8 8 10.5
9 9 11.5 9 9 11.5
10 10 12.5 10 10 12.5
11 11 13.5 11 11 13.5
12 12 14.5 12 12 14.5
13 13 15.5 13 13 15.5
14 14 16.5 14 14 16.5
16 16 18.5 16 16 18.5
18 18 20.5 18 18 20.5
20 20 22.5 20 20 22.5
22 22 24.5 22 22 24.5
24 24 26.5 24 24 26.5
26 26 28.5 26 26 28.5
28 28 30.5 28 28 30.5
30 30 32.5 30 30 32.5
32 32 34.5 32 32 34.5
34 34 36.5 34 34 36.5
36 36 38.5 36 36 38.5
* Installed length - (min - max) * Installed length - (min - max)
18
DWKL PRODUCTS
ADJUSTABLE LENGTHS
18“ Lined Bellows Length / DWKLØ-LBL
Ø ØA ØB
3 3 5.5
4 4 6.5
5 5 7.5
6 6 8.5
7 7 9.5
8 8 10.5
9 9 11.5
10 10 12.5
11 11 13.5
12 12 14.5
13 13 15.5
14 14 16.5
16 16 18.5
18 18 20.5
20 20 22.5
22 22 24.5
24 24 26.5
26 26 28.5
28 28 30.5
30 30 32.5
32 32 34.5
34 34 36.5
36 36 38.5
* Installed length
19
DWKL PRODUCTS
ELBOWS
1.5° Elbow / DWKLØ-1.5EL 3° Elbow / DWKLØ-3EL
Ø ØA ØB C D Ø ØA ØB C D
3 3 5.5 4.37 2.18 3 3 5.5 4.40 2.41
20
DWKL PRODUCTS
ELBOWS
45° Elbow / DWKLØ-45EL 70° Elbow / DWKLØ-70EL
Ø ØA ØB C D Ø ØA ØB C D
3 3 5.5 5.49 3.21 * 3 3 5.5 7.24 4.97
21
DWKL PRODUCTS
ELBOWS
30° Elbow with/Knock Plate / DWKLØ-30EK 45° Elbow with/Knock Plate / DWKLØ-45EK
Ø ØA B C D E Ø ØA B C D E F
3 3 10.52 8.41 5.08 9.07 3 3 5.5 6.13 6.43 5.49 4.77
*
4 4 11.26 9.41 5.21 9.93 4 4 6.5 7.11 7.40 5.70 5.94
70° Elbow with/Knock Plate / DWKLØ-70EK 87° Elbow with/Knock Plate / DWKLØ-87EK
Ø ØA B C D Ø A B C D *
3 3 5.5 8.81 4.63
*
3 3 5.5 7.75 5.32
22
DWKL PRODUCTS
ELBOWS
90° Elbow with/Knock Plate / DWKLØ-90EK Elbow 90° with support leg / DWKLØ-90ES
Ø A B C Ø A B C D E
3 3 5.5 7.63 3 3 5.5 8.24 7.1 15.34
23
DWKL PRODUCTS
TEES
45° Tee / DWKLØ-45T 45° Reduction Tee / DWKLØ-45TØ
Ø ØA ØB E F G H Ø ØA ØB ØC ØD E F G H I
3 3 5.5 11.1 8.9 16.6 11.1 3 3 5.5
Customer Dimension
Customer Dimension
Customer Dimension
Customer Dimension
Customer Dimension
Customer Dimension
Customer Dimension
12 12 14.5 21.9 19.7 29.3 21.9 12 12 14.5
Costumer Dimension
Customer Dimension
Customer Dimension
24
DWKL PRODUCTS
TEES
90° Tee / DWKLØ-90T 90° Reduction Tee / DWKLØ-90TØ
Ø ØA ØB C D E Ø ØA ØB ØC ØD E
3 3 5.5 7.10 7.10 14.21 3 3 5.5 7.0
Costumer Dimension
Costumer Dimension
12 12 14.5 11.60 11.60 23.21 12 12 14.5 11.5
Customer Dimension
Customer Dimension
Customer Dimension
Customer Dimension
25
DWKL PRODUCTS
TEES
90° Boot Tee / DWKLØ-90BT 90° Boot Reduction Tee / DWKLØ-90BTØ
Ø ØA ØB ØC D E F G Ø ØA ØB ØC ØD E F G H
3 3 5.5 6.17 10.12 7.85 14.0 16.2 3 3 5.5
Customer Dimension
Customer Dimension
Customer Dimension
Customer Dimension
Customer Dimension
Customer Dimension
12 12 14.5 10.67 18.35 16.08 26.8 29.0 12 12 14.5
4 4 6.5
5 5 7.5
6 6 8.5 *
7 7 9.5
8 8 10.5
9 9 11.5
10 10 12.5
11 11 13.5
Customer Dimension
Customer Dimension
Customer Dimension
Customer Dimension
Customer Dimension
Customer Dimension
Customer Dimension
12 12 14.5
13 13 15.5
14 14 16.5
16 16 18.5
18 18 20.5
20 20 22.5
22 22 24.5
24 24 26.5
26 26 28.5
28 28 30.5
30 30 32.5
32 32 34.5
34 34 36.5
36 36 38.5
* Installed length
26
DWKL PRODUCTS
GREASE TEES
90° Grease Duct Tee / DWKLØ-90GT 87° Grease Duct Tee / DWKLØ-87GT
Ø ØA ØB C Ø ØA ØB C D E F
3 3 5.5 7.15 3 3 5.5 7.9 7.4 6.9 14.3
45° Grease Duct Tee / DWKLØ-45GT 90° Grease Duct Boot Tee / DWKLØ-90GBT
Ø ØA ØB C D E F G Ø ØA ØB C D E F
3 3 5.5 7.7 3.2 8.7 16.4 5.4 3 3 5.5 6.2 8.0 10.2 16.4
4 4 6.5 8.6 3.5 9.9 17.8 5.6 4 4 6.5 6.7 8.9 11.1 17.8
5 5 7.5 9.5 3.9 11.1 19.2 5.8 5 5 7.5 7.2 9.8 12.0 19.2
6 6 8.5 10.3 4.3 12.3 20.6 6.0 6 6 8.5 7.7 10.7 12.9 20.6
7 7 9.5 11.2 4.6 13.5 22.1 6.2 7 7 9.5 8.2 11.6 13.8 22.0
8 8 10.5 12.0 5.0 14.8 23.5 6.4 8 8 10.5 8.7 12.5 14.7 23.4
9 9 11.5 12.9 5.3 16.0 24.9 6.6 9 9 11.5 9.2 13.5 15.7 24.8
10 10 12.5 13.7 5.7 17.2 26.3 6.8 10 10 12.5 9.7 14.4 16.6 26.3
11 11 13.5 14.6 6.0 18.4 27.5 7.0 11 11 13.5 10.2 15.3 17.5 27.7
12 12 14.5 15.4 6.4 19.6 29.1 7.2 12 12 14.5 10.7 16.2 18.4 29.1
13 13 15.5 16.3 6.7 20.8 30.5 7.4 13 13 15.5 11.2 17.1 19.3 30.5
14 14 16.5 17.1 7.1 22.0 32.0 7.6 14 14 16.5 11.7 18.0 20.2 31.9
16 16 18.5 18.8 7.8 24.4 34.8 8.1 16 16 18.5 12.7 19.9 22.1 34.7
18 18 20.5 20.6 8.5 26.8 37.6 8.5 18 18 20.5 13.7 21.7 23.9 37.6
20 20 22.5 22.3 9.2 29.2 40.5 8.9 20 20 22.5 14.7 23.5 25.7 40.4
22 22 24.5 24.0 9.9 31.6 43.3 9.3 22 22 24.5 15.7 25.3 27.5 43.2
24 24 26.5 25.7 10.6 34.1 46.1 9.7 24 24 26.5 16.7 27.2 29.4 46.1
26 26 28.5 27.4 11.3 36.6 48.9 10.1 26 26 28.5 17.7 29.5 31.4 49.8
28 28 30.5 29.1 12 39.1 51.7 10.5 28 28 30.5 18.7 31.4 33.5 52.9
30 30 32.5 30.8 12.7 41.6 54.5 10.9 30 30 32.5 19.7 33.5 35.6 55.7
32 32 34.5 32.5 13.4 44.1 57.5 11.3 32 32 34.5 20.7 35.4 37.4 58.7
34 34 36.5 34.2 14.1 46.6 60.1 11.7 34 34 36.5 21.7 37.4 39.4 61.8
36 36 38.5 35.9 14.8 49.1 62.9 12.4 36 36 38.5 22.7 39.5 41.6 64.9
* Installed length * Installed length
27
DWKL PRODUCTS
GREASE TEES
87° Grease Duct Boot tee / DWKLØ-87GBT
Ø ØA ØB C D E F G
3 3 5.5 5.9 7.9 10.1 10.4 16.3
28
DWKL PRODUCTS
WYE TEES
90° Wye Tee / DWKLØ-90WT 90° Reduction Wye Tee / DWKLØ-90WTØ
Ø ØA ØB C D Ø ØA ØB
3 3 5.5 3.12 7.03 3 3 5.5
90° Reduction Wye Tee / DWKLØ-90WTØ Type 1 90° Reduction Wye Tee / DWKLØ-90WTØ Type 2
Ø ØC ØD E Ø ØC ØD E
4 4 6.5 8.29 5 5 7.5 7.08
36 36 38.5 22.59
29
DWKL PRODUCTS
WYE TEES
90° Reduction Wye Tee / DWKLØ-90WTØ Type 3 90° Reduction Wye Tee / DWKLØ-90WTØ Type 4
Ø ØC ØD E Ø ØC ØD E F
6 6 8.5 5.81 7 7 9.5 4.62 9.50
36 36 38.5 15.75
30
DWKL PRODUCTS
TEE CAPS
Drain Tee Cap - Bottom / DWKLØ-DCB Drain Tee Cap - Side / DWKLØ-DCS
Ø ØA ØB Ø ØA ØB
3 3 5.5 3 3 5.5
4 4 6.5 4 4 6.5
5 5 7.5 5 5 7.5
6 6 8.5 6 6 8.5
7 7 9.5 7 7 9.5
8 8 10.5 8 8 10.5
1/2 N.P.T. Nipple
9 9 11.5 9 9 11.5
10 10 12.5 10 10 12.5
12 12 14.5 12 12 14.5
13 13 15.5 13 13 15.5
14 14 16.5 14 14 16.5
16 16 18.5 16 16 18.5
18 18 20.5 18 18 20.5
20 20 22.5 20 20 22.5
22 22 24.5 22 22 24.5
24 24 26.5 24 24 26.5
26 26 28.5 26 26 28.5
28 28 30.5 28 28 30.5
30 30 32.5 30 30 32.5
32 32 34.5 32 32 34.5
34 34 36.5 34 34 36.5
36 36 38.5 36 36 38.5
4 4 6.5 4 4 6.5
5 5 7.5 5 5 7.5
6 6 8.5 6 6 8.5
7 7 9.5 7 7 9.5
4,47 4,17
8 8 10.5 8 8 10.5
9 9 11.5 9 9 11.5
10 10 12.5 10 10 12.5
11 11 13.5 11 11 13.5
12 12 14.5 12 12 14.5
13 13 15.5 13 13 15.5
14 14 16.5 14 14 16.5
16 16 18.5 16 16 18.5
18 18 20.5 18 18 20.5
20 20 22.5 20 20 22.5
22 22 24.5 22 22 24.5
24 24 26.5 24 24 26.5
26 26 28.5 26 26 28.5
28 28 30.5 28 28 30.5
30 30 32.5 30 30 32.5
32 32 34.5 32 32 34.5
34 34 36.5 34 34 36.5
36 36 38.5 36 36 38.5
31
DWKL PRODUCTS
INCREASERS
Tapered Increaser / DWKLØ-TIØ Increase to next standard Ø Tapered Increaser / DWKLØ-TIØ Two standard Ø increase
Ø ØA ØB ØC ØD E Ø ØA ØB ØC ØD E
3 3 5.5 4 6.5 3 3 5.5 5 7.5
13 13 15.5 14 16.5
* 13 13 15.5 16 18.5
*
14 14 16.5 16 18.5 12.5 14 14 16.5 18 20.5 12.5
36 36 38.5 36 36 38.5
* Installed length * Installed length
Tapered Increaser / DWKLØ-TIØ Three standard Ø increase Tapered Increaser / DWKLØ-TIØ Four standard Ø increase
Ø ØA ØB ØC ØD E Ø ØA ØB ØC ØD E
3 3 5.5 6 8.5 3 3 5.5 7 9.5
13 13 15.5 18 20.5
* 13 13 15.5 20 22.5
*
14 14 16.5 20 22.5 12.5 14 14 16.5 22 24.5 12.5
32 32 34.5 32 32 34.5
34 34 36.5 34 34 36.5
36 36 38.5 36 36 38.5
* Installed length * Installed length
32
DWKL PRODUCTS
INCREASERS
Tapered Increaser / DWKLØ-TIØ Five standard Ø increase Tapered Eccentric Increaser / DWKLØ-TEIØ
Ø ØA ØB ØC ØD E Ø ØA ØB E
3 3 5.5 8 10.5 3 3 5.5
13 13 15.5 22 24.5
* 13 13 15.5
28 28 30.5 28 28 30.5
30 30 32.5 30 30 32.5
32 32 34.5 32 32 34.5
34 34 36.5 34 34 36.5
36 36 38.5 36 36 38.5
* Installed length * Installed length
Tapered Eccentric Increaser / DWKLØ-TEIØ Increase to next standard Ø Tapered Eccentric Increaser / DWKLØ-TEIØ Two standard Ø increase
Ø ØC ØD E Ø ØC ØD E
4 4 6.5 5 5 7.5
5 5 7.5 6 6 8.5
6 6 8.5 7 7 9.5
7 7 9.5 8 8 10.5
8 8 10.5 9 9 11.5
9 9 11.5 10 10 12.5
10 10 12.5 * 11 11 13.5 *
11 11 13.5 12 12 14.5
12 12 14.5 13 13 15.5
13 13 15.5 14 14 16.5
18 18 20.5 20 20 22.5
20 20 22.5 22 22 24.5
22 22 24.5 24 24 26.5
24 24 26.5 26 26 28.5
26 26 28.5 28 28 30.5
28 28 30.5 30 30 32.5
30 30 32.5 32 32 34.5
32 32 34.5 34 34 36.5
34 34 36.5 36 36 38.5
36 36 38.5
33
DWKL PRODUCTS
INCREASERS
Tapered Eccentric Increaser / DWKLØ-TEIØ Three standard Ø increase Tapered Eccentric Increaser / DWKLØ-TEIØ Four standard Ø increase
Ø ØC ØD E Ø ØC ØD E
6 6 8.5 7 7 9.5
7 7 9.5 8 8 10.5
8 8 10.5 9 9 11.5
9 9 11.5 10 10 12.5
10 10 12.5 11 11 13.5
11 11 13.5 12 12 14.5
12 12 14.5 * 13 13 15.5 *
13 13 15.5 14 14 16.5
14 14 16.5 16 16 18.5
20 20 22.5 22 22 24.5
22 22 24.5 24 24 26.5
24 24 26.5 26 26 28.5
26 26 28.5 28 28 30.5
28 28 30.5 30 30 32.5
30 30 32.5 32 32 34.5
32 32 34.5 34 34 36.5
34 34 36.5 36 36 38.5
36 36 38.5
Tapered Eccentric Increaser / DWKLØ-TEIØ Five standard Ø increase Stepped Increaser / DWKLØ-SIØ
Ø ØC ØD E Ø ØA ØB E
8 8 10.5 3 3 5.5
9 9 11.5 4 4 6.5
10 10 12.5 5 5 7.5
11 11 13.5 6 6 8.5
12 12 14.5 7 7 9.5
13 13 15.5 8 8 10.5
14 14 16.5 * 9 9 11.5
16 16 18.5 10 10 12.5
18 18 20.5 11 11 13.5
12.5
20 20 22.5 12 12 14.5
22 22 24.5 13 13 15.5
26 26 28.5 16 16 18.5 *
28 28 30.5 18 18 20.5
30 30 32.5 20 20 22.5
32 32 34.5 22 22 24.5
34 34 36.5 24 24 26.5
36 36 38.5 26 26 28.5
28 28 30.5
30 30 32.5
32 32 34.5
34 34 36.5
36 36 38.5
* Installed length * Installed length
34
DWKL PRODUCTS
INCREASERS
Stepped Increaser / DWKLØ-SIØ Increase to next standard Ø Stepped Increaser / DWKLØ-SIØ Two standard Ø Increase
Ø ØC ØD E Ø ØC ØD E
4 4 6.5 5 5 7.5
5 5 7.5 6 6 8.5
6 6 8.5 7 7 9.5
7 7 9.5 8 8 10.5
8 8 10.5 9 9 11.5
9 9 11.5 10 10 12.5
10 10 12.5 11 11 13.5
11 11 13.5 12 12 14.5
12 12 14.5 13 13 15.5
13 13 15.5 14 14 16.5
18 18 20.5 * 20 20 22.5 *
20 20 22.5 22 22 24.5
22 22 24.5 24 24 26.5
24 24 26.5 26 26 28.5
26 26 28.5 28 28 30.5
28 28 30.5 30 30 32.5
30 30 32.5 32 32 34.5
32 32 34.5 34 34 36.5
34 34 36.5 36 36 38.5
36 36 38.5
Stepped Increaser / DWKLØ-SIØ Three standard Ø Increase Stepped Increaser / DWKLØ-SIØ Four standard Ø Increase
Ø ØC ØD E Ø ØC ØD E
6 6 8.5 7 7 9.5
7 7 9.5 8 8 10.5
8 8 10.5 9 9 11.5
9 9 11.5 10 10 12.5
10 10 12.5 11 11 13.5
11 11 13.5 12 12 14.5
12 12 14.5 13 13 15.5
13 13 15.5 14 14 16.5
14 14 16.5 16 16 18.5
20 20 22.5 22 22 24.5
22 22 24.5 * 24 24 26.5 *
24 24 26.5 26 26 28.5
26 26 28.5 28 28 30.5
28 28 30.5 30 30 32.5
30 30 32.5 32 32 34.5
32 32 34.5 34 34 36.5
34 34 36.5 36 36 38.5
36 36 38.5
35
DWKL PRODUCTS
INCREASERS
Stepped Increaser / DWKLØ-SIØ Five standard Ø Increase Stepped Eccentric Increaser / DWKLØ-SEIØ
Ø ØC ØD E Ø ØA ØB E
8 8 10.5 3 3 5.5
9 9 11.5 4 4 6.5
10 10 12.5 5 5 7.5
11 11 13.5 6 6 8.5
12 12 14.5 7 7 9.5
13 13 15.5 8 8 10.5 *
14 14 16.5 9 9 11.5
16 16 18.5 10 10 12.5
18 18 20.5 11 11 13.5
9.5
20 20 22.5 12 12 14.5
22 22 24.5 13 13 15.5
26 26 28.5 * 16 16 18.5
28 28 30.5 18 18 20.5
30 30 32.5 20 20 22.5
32 32 34.5 22 22 24.5
34 34 36.5 24 24 26.5
36 36 38.5 26 26 28.5
28 28 30.5
30 30 32.5
32 32 34.5
34 34 36.5
36 36 38.5
* Installed length * Installed length
Stepped Eccentric Increaser / DWKLØ-SEIØ Type 1 Stepped Eccentric Increaser / DWKLØ-SEIØ Type 2
Ø ØC ØD E Ø ØC ØD E
4 4 6.5 5 5 7.5
5 5 7.5 6 6 8.5
6 6 8.5 7 7 9.5
7 7 9.5 8 8 10.5
8 8 10.5 9 9 11.5
9 9 11.5 * 10 10 12.5 *
10 10 12.5 11 11 13.5
11 11 13.5 12 12 14.5
12 12 14.5 13 13 15.5
13 13 15.5 14 14 16.5
18 18 20.5 20 20 22.5
20 20 22.5 22 22 24.5
22 22 24.5 24 24 26.5
24 24 26.5 26 26 28.5
26 26 28.5 28 28 30.5
28 28 30.5 30 30 32.5
30 30 32.5 32 32 34.5
32 32 34.5 34 34 36.5
34 34 36.5 36 36 38.5
36 36 38.5
36
DWKL PRODUCTS
INCREASER
Stepped Eccentric Increaser / DWKLØ-SEIØ Type 3 Stepped Eccentric Increaser / DWKLØ-SEIØ Type 4
Ø ØC ØD E Ø ØC ØD E
6 6 8.5 7 7 9.5
7 7 9.5 8 8 10.5
8 8 10.5 9 9 11.5
9 9 11.5 10 10 12.5
10 10 12.5 11 11 13.5
11 11 13.5 * 12 12 14.5 *
12 12 14.5 13 13 15.5
13 13 15.5 14 14 16.5
14 14 16.5 16 16 18.5
20 20 22.5 22 22 24.5
22 22 24.5 24 24 26.5
24 24 26.5 26 26 28.5
26 26 28.5 28 28 30.5
28 28 30.5 30 30 32.5
30 30 32.5 32 32 34.5
32 32 34.5 34 34 36.5
34 34 36.5 36 36 38.5
36 36 38.5
Ø ØC ØD E
8 8 10.5
9 9 11.5
10 10 12.5
11 11 13.5
12 12 14.5
13 13 15.5 *
14 14 16.5
16 16 18.5
18 18 20.5
9.5
20 20 22.5
22 22 24.5
24 24 26.5
26 26 28.5
28 28 30.5
30 30 32.5
32 32 34.5
34 34 36.5
36 36 38.5
* Installed length
37
DWKL PRODUCTS
REDUCERS
Tapered Reducer / DWKLØ-TRØ Tapered Reducer / DWKLØ-TRØ Reduction to the next standard Ø
Ø ØA ØB E Ø ØC ØD E
3 3 5.5 3 3 5.5
4 4 6.5 4 4 6.5
5 5 7.5 5 5 7.5
6 6 8.5 6 6 8.5
7 7 9.5 7 7 9.5
8 8 10.5 8 8 10.5
9 9 11.5 9 9 11.5
10 10 12.5 10 10 12.5
11 11 13.5 11 11 13.5
12 12 14.5 12 12 14.5
13 13 15.5 13 13 15.5
12.5
14 14 16.5 12.5 14 14 16.5
* *
16 16 18.5 16 16 18.5
18 18 20.5 18 18 20.5
20 20 22.5 20 20 22.5
22 22 24.5 22 22 24.5
24 24 26.5 24 24 26.5
26 26 28.5 26 26 28.5
28 28 30.5 28 28 30.5
30 30 32.5 30 30 32.5
32 32 34.5 32 32 34.5
34 34 36.5 34 34 36.5
36 36 38.5
* Installed length * Installed length
Tapered Reducer / DWKLØ-TRØ Two standard Ø reduction Tapered Reducer / DWKLØ-TRØ Three standard Ø reduction
Ø ØC ØD E Ø ØC ØD E
3 3 5.5 3 3 5.5
4 4 6.5 4 4 6.5
5 5 7.5 5 5 7.5
6 6 8.5 6 6 8.5
7 7 9.5 7 7 9.5
8 8 10.5 8 8 10.5
9 9 11.5 9 9 11.5
10 10 12.5 10 10 12.5
11 11 13.5 11 11 13.5
12 12 14.5 12 12 14.5
12.5
13 13 15.5 12.5 13 13 15.5
14 14 16.5 14 14 16.5
* *
16 16 18.5 16 16 18.5
18 18 20.5 18 18 20.5
20 20 22.5 20 20 22.5
22 22 24.5 22 22 24.5
24 24 26.5 24 24 26.5
26 26 28.5 26 26 28.5
28 28 30.5 28 28 30.5
30 30 32.5 30 30 32.5
32 32 34.5
38
DWKL PRODUCTS
REDUCERS
Tapered Reducer / DWKLØ-TRØ Four standard Ø reduction Tapered Reducer / DWKLØ-TRØ Five standard Ø reduction
Ø ØC ØD E Ø ØC ØD E
3 3 5.5 3 3 5.5
4 4 6.5 4 4 6.5
5 5 7.5 5 5 7.5
6 6 8.5 6 6 8.5
7 7 9.5 7 7 9.5
8 8 10.5 8 8 10.5
9 9 11.5 9 9 11.5
10 10 12.5 10 10 12.5
11 11 13.5 11 11 13.5
12.5
12 12 14.5 12.5 12 12 14.5
13 13 15.5 13 13 15.5
14 14 16.5 14 14 16.5
* *
16 16 18.5 16 16 18.5
18 18 20.5 18 18 20.5
20 20 22.5 20 20 22.5
22 22 24.5 22 22 24.5
24 24 26.5 24 24 26.5
26 26 28.5 26 26 28.5
28 28 30.5
Tapered Eccentric Reducer / DWKLØ-TERØ Tapered Eccentric Reducer / DWKLØ-TERØ Reduction to next standard Ø
Ø ØA ØB E Ø ØC ØD E
3 3 5.5 3 3 5.5
4 4 6.5 4 4 6.5
5 5 7.5 5 5 7.5
6 6 8.5 6 6 8.5
7 7 9.5 7 7 9.5
8 8 10.5 8 8 10.5
9 9 11.5 9 9 11.5
10 10 12.5 10 10 12.5
11 11 13.5 11 11 13.5
12 12 14.5 12 12 14.5
13 13 15.5 13 13 15.5
12.5
14 14 16.5 12.5 14 14 16.5
16 16 18.5 16 16 18.5
18 18 20.5 18 18 20.5
20 20 22.5 20 20 22.5
22 22 24.5 22 22 24.5
24 24 26.5 24 24 26.5
26 26 28.5 26 26 28.5
28 28 30.5 28 28 30.5
30 30 32.5 30 30 32.5
32 32 34.5 32 32 34.5
34 34 36.5 34 34 36.5
36 36 38.5
* Installed length * Installed length
39
DWKL PRODUCTS
REDUCERS
Tapered Eccentric Reducer / DWKLØ-TERØ Two standard Ø reduction Tapered Eccentric Reducer / DWKLØ-TERØ Three standard Ø reduction
Ø ØC ØD E Ø ØC ØD E
3 3 5.5 3 3 5.5
4 4 6.5 4 4 6.5
5 5 7.5 5 5 7.5
6 6 8.5 6 6 8.5
7 7 9.5 7 7 9.5
8 8 10.5 8 8 10.5
9 9 11.5 9 9 11.5
10 10 12.5 10 10 12.5
11 11 13.5 11 11 13.5
12 12 14.5 12 12 14.5
12.5
13 13 15.5 12.5 13 13 15.5
14 14 16.5 14 14 16.5
16 16 18.5 16 16 18.5
18 18 20.5 18 18 20.5
20 20 22.5 20 20 22.5
22 22 24.5 22 22 24.5
24 24 26.5 24 24 26.5
26 26 28.5 26 26 28.5
28 28 30.5 28 28 30.5
30 30 32.5 30 30 32.5
32 32 34.5
Tapered Eccentric Reducer / DWKLØ-TERØ Four standard Ø reduction Tapered Eccentric Reducer / DWKLØ-TERØ Five standard Ø reduction
Ø ØC ØD E Ø ØC ØD E
3 3 5.5 3 3 5.5
4 4 6.5 4 4 6.5
5 5 7.5 5 5 7.5
6 6 8.5 6 6 8.5
7 7 9.5 7 7 9.5
8 8 10.5 8 8 10.5
9 9 11.5 9 9 11.5
10 10 12.5 10 10 12.5
11 11 13.5 11 11 13.5
12.5
12 12 14.5 12.5 12 12 14.5
13 13 15.5 13 13 15.5
14 14 16.5 14 14 16.5
16 16 18.5 16 16 18.5
18 18 20.5 18 18 20.5
20 20 22.5 20 20 22.5
22 22 24.5 22 22 24.5
24 24 26.5 24 24 26.5
26 26 28.5 26 26 28.5
28 28 30.5
40
DWKL PRODUCTS
REDUCERS
Stepped Reducer / DWKLØ-SRØ Stepped Reducer / DWKLØ-SRØ Reduction to next standard Ø
Ø ØA ØB E Ø ØC ØD E
3 3 5.5 3 3 5.5
4 4 6.5 4 4 6.5
5 5 7.5 5 5 7.5
6 6 8.5 6 6 8.5
7 7 9.5 7 7 9.5
8 8 10.5 8 8 10.5
9 9 11.5 9 9 11.5
10 10 12.5 10 10 12.5
11 11 13.5 11 11 13.5
12 12 14.5
*
12 12 14.5
*
13 13 15.5 13 13 15.5
9.5
14 14 16.5 9.5 14 14 16.5
16 16 18.5 16 16 18.5
18 18 20.5 18 18 20.5
20 20 22.5 20 20 22.5
22 22 24.5 22 22 24.5
24 24 26.5 24 24 26.5
26 26 28.5 26 26 28.5
28 28 30.5 28 28 30.5
30 30 32.5 30 30 32.5
32 32 34.5 32 32 34.5
34 34 36.5 34 34 36.5
36 36 38.5
* Installed length * Installed length
Stepped Reducer / DWKLØ-SRØ Two standard Ø reduction Stepped Reducer / DWKLØ-SRØ Three standard Ø reduction
Ø ØC ØD E Ø ØC ØD E
3 3 5.5 3 3 5.5
4 4 6.5 4 4 6.5
5 5 7.5 5 5 7.5
6 6 8.5 6 6 8.5
7 7 9.5 7 7 9.5
8 8 10.5 8 8 10.5
9 9 11.5 9 9 11.5
10 10 12.5 10 10 12.5
11 11 13.5 11 11 13.5
12 12 14.5
*
12 12 14.5
*
9.5
13 13 15.5 9.5 13 13 15.5
14 14 16.5 14 14 16.5
16 16 18.5 16 16 18.5
18 18 20.5 18 18 20.5
20 20 22.5 20 20 22.5
22 22 24.5 22 22 24.5
24 24 26.5 24 24 26.5
26 26 28.5 26 26 28.5
28 28 30.5 28 28 30.5
30 30 32.5 30 30 32.5
32 32 34.5
41
DWKL PRODUCTS
REDUCERS
Stepped Reducer / DWKLØ-SRØ Four standard Ø reduction Stepped Reducer / DWKLØ-SRØ Five standard Ø reduction
Ø ØC ØD E Ø ØC ØD E
3 3 5.5 3 3 5.5
4 4 6.5 4 4 6.5
5 5 7.5 5 5 7.5
6 6 8.5 6 6 8.5
7 7 9.5 7 7 9.5
8 8 10.5 8 8 10.5
9 9 11.5 9 9 11.5
10 10 12.5 10 10 12.5
11 11 13.5 11 11 13.5
9.5
12 12 14.5 9.5
*
12 12 14.5
*
13 13 15.5 13 13 15.5
14 14 16.5 14 14 16.5
16 16 18.5 16 16 18.5
18 18 20.5 18 18 20.5
20 20 22.5 20 20 22.5
22 22 24.5 22 22 24.5
24 24 26.5 24 24 26.5
26 26 28.5 26 26 28.5
28 28 30.5
Stepped Eccentric Reducer / DWKLØ-SERØ Stepped Eccentric Reducer / DWKLØ-SERØ Reduction to next standard Ø
Ø ØA ØB E Ø ØA ØB E
3 3 5.5 3 3 5.5
4 4 6.5 4 4 6.5
5 5 7.5 5 5 7.5
6 6 8.5 6 6 8.5
7 7 9.5 7 7 9.5
8 8 10.5 8 8 10.5
9 9 11.5 9 9 11.5
10 10 12.5 10 10 12.5
11 11 13.5 11 11 13.5
* *
12 12 14.5 12 12 14.5
13 13 15.5 13 13 15.5
9.5
14 14 16.5 9.5 14 14 16.5
16 16 18.5 16 16 18.5
18 18 20.5 18 18 20.5
20 20 22.5 20 20 22.5
22 22 24.5 22 22 24.5
24 24 26.5 24 24 26.5
26 26 28.5 26 26 28.5
28 28 30.5 28 28 30.5
30 30 32.5 30 30 32.5
32 32 34.5 32 32 34.5
34 34 36.5 34 34 36.5
36 36 38.5
* Installed length * Installed length
42
DWKL PRODUCTS
REDUCERS
Stepped Eccentric Reducer / DWKLØ-SERØ Two standard Ø reduction Stepped Eccentric Reducer / DWKLØ-SERØ Three standard Ø reduction
Ø ØA ØB E Ø ØA ØB E
3 3 5.5 3 3 5.5
4 4 6.5 4 4 6.5
5 5 7.5 5 5 7.5
6 6 8.5 6 6 8.5
7 7 9.5 7 7 9.5
8 8 10.5 8 8 10.5
9 9 11.5 9 9 11.5
10 10 12.5 10 10 12.5
11 11 13.5 11 11 13.5
* *
12 12 14.5 12 12 14.5
9.5
13 13 15.5 9.5 13 13 15.5
14 14 16.5 14 14 16.5
16 16 18.5 16 16 18.5
18 18 20.5 18 18 20.5
20 20 22.5 20 20 22.5
22 22 24.5 22 22 24.5
24 24 26.5 24 24 26.5
26 26 28.5 26 26 28.5
28 28 30.5 28 28 30.5
30 30 32.5 30 30 32.5
32 32 34.5
Stepped Eccentric Reducer / DWKLØ-SERØ Four standard Ø reduction Stepped Eccentric Reducer / DWKLØ-SERØ Five standard Ø reduction
Ø ØA ØB E Ø ØA ØB E
3 3 5.5 3 3 5.5
4 4 6.5 4 4 6.5
5 5 7.5 5 5 7.5
6 6 8.5 6 6 8.5
7 7 9.5 7 7 9.5
8 8 10.5 8 8 10.5
9 9 11.5 9 9 11.5
10 10 12.5 10 10 12.5
11 11 13.5 11 11 13.5
* 9.5 *
12 12 14.5 9.5 12 12 14.5
13 13 15.5 13 13 15.5
14 14 16.5 14 14 16.5
16 16 18.5 16 16 18.5
18 18 20.5 18 18 20.5
20 20 22.5 20 20 22.5
22 22 24.5 22 22 24.5
24 24 26.5 24 24 26.5
26 26 28.5 26 26 28.5
28 28 30.5
43
DWKL PRODUCTS
FLASHINGS
Flat Roof Flashing / DWKLØ-FRF Pitched Roof Flashing / DWKLØ-PRF
Ø ØA ØB ØC Ø ØA ØB ØC ß
3 5.5 13 25 3 5.5 13 25
4 6.5 14 26 4 6.5 14 26
5 7.4 15 27 5 7.4 15 27
6 8.5 16 28 6 8.5 16 28
7 9.5 17 29 7 9.5 17 29
8 10.5 18 30 8 10.5 18 30
9 11.5 19 31 9 11.5 19 31
10 12.5 20 32 10 12.5 20 32
11 13.5 21 33 11 13.5 21 33
Customer Dimension
12 14.5 22 34 12 14.5 22 34
13 15.5 23 35 13 15.5 23 35
14 16.5 24 36 14 16.5 24 36
16 18.5 26 38 16 18.5 26 38
18 20.5 28 40 18 20.5 28 40
20 22.5 30 42 20 22.5 30 42
22 24.5 32 44 22 24.5 32 44
24 26.5 34 46 24 26.5 34 46
26 28.5 36 48 26 28.5 36 48
28 30.5 38 50 28 30.5 38 50
30 32.5 40 52 30 32.5 40 52
32 34.5 42 54 32 34.5 42 54
34 36.5 44 56 34 36.5 44 56
36 38.5 46 58 36 38.5 46 58
4 6.5 16 4 17 25
5 7.4 17 5 18 26
6 8.5 18 6 19 27
7 9.5 19 7 20 28
8 10.5 20 8 21 29
9 11.5 21 9 22 30
10 12.5 22 10 23 31
11 13.5 23 11 24 32
12 14.5 24 12 25 33
13 15.5 25 13 26 34
14 16.5 26 14 27 35
16 18.5 28 16 29 37
18 20.5 30 18 31 39
20 22.5 32 20 33 41
22 24.5 34 22 35 43
24 26.5 36 24 37 45
26 28.5 38 26 39 47
28 30.5 40 28 41 49
30 32.5 42 30 43 51
32 34.5 44 32 45 53
34 36.5 46 34 47 55
36 38.5 48 36 49 57
44
DWKL PRODUCTS
FLASHINGS
Ventilated Storm Collar / DWKL-VSC Flat Cone Flashing / DWKL-FCF
Ø ØA ØB Ø I.D ØB ØC
3 5.5 19 3 3 9.5 21.5
Pitched Cone Flashing / DWKL-PCF Storm Collar For Coned Flashings / DWKL-SCCF
Ø ØB ØC ØD ß Ø ØA
3 6.5 9.5 21.5 3 5.5
45
DWKL PRODUCTS
FLASHINGS
High Temperature Insulated Thimble / ØDWKL-HTT Low Temperature Thimble / DWKL-LTT
Ø ØA ØB ØC Ø I.D ØA ØB ØC ØD ØE
3 5.5 6 8.5 3 3
4 6.5 7 9.5 4 4
5 7.4 8 10.5 5 5
6 8.5 9 11.5 6 6
7 9.5 10 12.5 7 7
8 10.5 11 13.5 8 8
9 11.5 12 14.5 9 9
10 12.5 13 15.5 10 10
11 13.5 14 16.5 11 11
12 14.5 15 17.5 12 12
13 15.5 16 18.5 13 13
I.D + 2.75
I.D + 6.5
I.D + 10“
I.D + 5.5
I.D + 4“
14 16.5 17 19.5 14 14
16 18.5 19 21.5 16 16
18 20.5 21 23.5 18 18
20 22.5 23 25.5 20 20
22 24.5 25 27.5 22 22
24 26.5 27 29.5 24 24
26 28.5 29 31.5 26 26
28 30.5 31 33.5 28 28
30 32.5 33 35.5 30 30
32 34.5 35 37.5 32 32
34 36.5 38 39.5 34 34
36 38.5 39 41.5 36 36
46
DWKL PRODUCTS
TERMINATIONS
Transition to Round - Start / DWKLØ-TRS Transition to Round - End / DWKLØ-TRE
Ø ØA ØB ØC ØD Ø ØA ØB C D
3 3 5.5 3 3 5.5
4 4 6.5 4 4 6.5
5 5 7.5 5 5 7.5
6 6 8.5 6 6 8.5
7 7 9.5 7 7 9.5
8 8 10.5 8 8 10.5
9 9 11.5 9 9 11.5
10 10 12.5 10 10 12.5
11 11 13.5 11 11 13.5
Customer Dimension
Customer Dimension
Customer Dimension
Customer Dimension
12 12 14.5 12 12 14.5
13 13 15.5 13 13 15.5
14 14 16.5 14 14 16.5
16 16 18.5 16 16 18.5
18 18 20.5 18 18 20.5
20 20 22.5 20 20 22.5
22 22 24.5 22 22 24.5
24 24 26.5 24 24 26.5
26 26 28.5 26 26 28.5
28 28 30.5 28 28 30.5
30 30 32.5 30 30 32.5
32 32 34.5 32 32 34.5
34 34 36.5 34 34 36.5
36 36 38.5 36 36 38.5
4 4 6.5 4 4 6.5
5 5 7.5 5 5 7.5
6 6 8.5 6 6 8.5
7 7 9.5 7 7 9.5
8 8 10.5 8 8 10.5
9 9 11.5 9 9 11.5
10 10 12.5 10 10 12.5
11 11 13.5 11 11 13.5
12 12 14.5 12 12 14.5
13 13 15.5 13 13 15.5
14 14 16.5 14 14 16.5
16 16 18.5 16 16 18.5
18 18 20.5 18 18 20.5
20 20 22.5 20 20 22.5
22 22 24.5 22 22 24.5
24 24 26.5 24 24 26.5
26 26 28.5 26 26 28.5
28 28 30.5 28 28 30.5
30 30 32.5 30 30 32.5
32 32 34.5 32 32 34.5
34 34 36.5 34 34 36.5
36 36 38.5 36 36 38.5
47
DWKL PRODUCTS
TERMINATIONS
Open Termination w/Screen / DWKLØ-OTS Open Termination w/Screen High Temp / DWKLØ-OTSH
Ø ØA ØB Ø ØA ØB
3 3 5.5 3 3 5.5
4 4 6.5 4 4 6.5
5 5 7.5 5 5 7.5
6 6 8.5 6 6 8.5
7 7 9.5 7 7 9.5
8 8 10.5 8 8 10.5
9 9 11.5 9 9 11.5
10 10 12.5 10 10 12.5
11 11 13.5 11 11 13.5
12 12 14.5 12 12 14.5
13 13 15.5 13 13 15.5
14 14 16.5 14 14 16.5
16 16 18.5 16 16 18.5
18 18 20.5 18 18 20.5
20 20 22.5 20 20 22.5
22 22 24.5 22 22 24.5
24 24 26.5 24 24 26.5
26 26 28.5 26 26 28.5
28 28 30.5 28 28 30.5
30 30 32.5 30 30 32.5
32 32 34.5 32 32 34.5
34 34 36.5 34 34 36.5
36 36 38.5 36 36 38.5
Ø ØA ØB C Ø ØA ØB C
3 3 5.5 2.44 3 3 5.5 2.44
48
DWKL PRODUCTS
TERMINATIONS
Flat Top Rain Cap / DWKLØ-FTN Flat Top Rain Cap High Temp / DWKLØ-FTNH
Ø ØA ØB C ØD Ø ØA ØB C ØD
3 3 5.5 5.31 11.1 3 3 5.5 5.31 11.1
Flat Top Rain Cap w/Screen / DWKLØ-FTS Flat Top Rain Cap w/Screen High Temp / DWKLØ-FTSH
Ø ØA ØB C ØD Ø ØA ØB C ØD
3 3 5.5 5.31 11.1 3 3 5.5 5.31 11.1
49
DWKL PRODUCTS
TERMINATIONS
High Wind Rain Cap / DWKLØ-WRC Stack Cap - no Screen / DWKLØ-SCN
Ø ØA ØB ØC D E Ø ØA ØB C ØD
3 2.9 5.5 10.3 7 0.60 3 3 5.5 2.0 6.0
Stack Cap - no Screen High Temperature / D-KLØ-SCNH Stack Cap w/Screen / DWKLØ-SCS
Ø ØA ØB C ØD Ø ØA ØB C ØD
3 3 5.5 2.0 6.0 3 3 5.5 2.0 6.0
50
DWKL PRODUCTS
TERMINATIONS
Stack Cap w/Screen High Temp / DWKLØ-SCSH Miter Cut Termination w/Screen / DWKLØ-MCS
Ø ØA ØB C ØD Ø ØA ØB
3 3 5.5 2.0 6.0 3 3 5.5
Miter Cut Termination w/Screen High Temp / DWKLØ-MCSH Tee Termination w/Screen / DWKLØ-TT
Ø ØA ØB Ø ØA ØB C
3 3 5.5 3 3 5.5 14
4 4 6.5 4 4 6.5 15
5 5 7.5 5 5 7.5 16
6 6 8.5 6 6 8.5 17
7 7 9.5 7 7 9.5 18
8 8 10.5 8 8 10.5 19
9 9 11.5 9 9 11.5 20
10 10 12.5 10 10 12.5 21
11 11 13.5 11 11 13.5 22
12 12 14.5 12 12 14.5 23
13 13 15.5 13 13 15.5 24
14 14 16.5 14 14 16.5 25
16 16 18.5 16 16 18.5 27
18 18 20.5 18 18 20.5 29
20 20 22.5 20 20 22.5 31
22 22 24.5 22 22 24.5 33
24 24 26.5 24 24 26.5 35
26 26 28.5 26 26 28.5 37
28 28 30.5 28 28 30.5 39
30 30 32.5 30 30 32.5 41
32 32 34.5 32 32 34.5 43
34 34 36.5 34 34 36.5 45
36 36 38.5 36 36 38.5 47
51
DWKL PRODUCTS
TERMINATIONS
90° Termination w/Screen / DWKLØ-90ET 30° Termination w/Screen / DWKLØ-30ET
Ø ØA ØB C Ø ØA ØB C D E
3 3 5.5 8.2 3 3 5.5 9.34 2.49 10.89
Engine Flip Top / DWKLØ-EFT Engine Flip Top High Temp / DWKLØ-EFTH
Ø ØA ØB Ø ØA ØB
3 3 5.5 3 3 5.5
4 4 6.5 4 4 6.5
5 5 7.5 5 5 7.5
6 6 8.5 6 6 8.5
7 7 9.5 7 7 9.5
8 8 10.5 8 8 10.5
9 9 11.5 9 9 11.5
10 10 12.5 10 10 12.5
11 11 13.5 11 11 13.5
12 12 14.5 12 12 14.5
13 13 15.5 13 13 15.5
14 14 16.5 14 14 16.5
16 16 18.5 16 16 18.5
18 18 20.5 18 18 20.5
20 20 22.5 20 20 22.5
22 22 24.5 22 22 24.5
24 24 26.5 24 24 26.5
26 26 28.5 26 26 28.5
28 28 30.5 28 28 30.5
30 30 32.5 30 30 32.5
32 32 34.5 32 32 34.5
34 34 36.5 34 34 36.5
36 36 38.5 36 36 38.5
52
DWKL PRODUCTS
TERMINATIONS
No-Loss Weather Head / DWKLØ-NLWH
Ø ØA ØB C D E F
3 3 5.5 5 11.5 15.9
53
DWKL PRODUCTS
ACCESSORIES
Locking Band / DWKLØ-LB Flange Collar Kit / DWKLØ-FCK
Ø ØB Ø ØA ti/ta
3 5.5 3
4 6.5 4
5 7.5 5
6 8.5 6 4
7 9.5 7
8 10.5 8
9 11.5 9
10 12.5 10
5
11 13.5 11
16 18.5 16 8
18 20.5 18 9
20 22.5 20 10
22 24.5 22 11
24 26.5 24 12
26 28.5 26 14
28 30.5 28 16
30 32.5 30 18
32 34.5 32 20
34 36.5 34 22
36 38.5 36 24
0.025
54
DWKL PRODUCTS
ACCESSORIES
Universal Drain Length / DWKLØ-UDL Test and Nozzle Port Length / DWKLØ-TPL
Ø ØA ØB Ø ØA ØB
3 3 5.5 3 3 5.5
4 4 6.5 4 4 6.5
5 5 7.5 5 5 7.5
6 6 8.5 6 6 8.5
7 7 9.5
*
7 7 9.5
8 8 10.5 8 8 10.5
9 9 11.5 9 9 11.5
10 10 12.5 10 10 12.5
13 13 15.5 13 13 15.5
14 14 16.5 14 14 16.5
16 16 18.5 16 16 18.5
18 18 20.5 18 18 20.5
20 20 22.5 20 20 22.5
22 22 24.5 22 22 24.5
24 24 26.5 24 24 26.5
26 26 28.5 26 26 28.5
28 28 30.5 28 28 30.5
30 30 32.5 30 30 32.5
32 32 34.5 32 32 34.5
34 34 36.5 34 34 36.5
36 36 38.5 36 36 38.5
* Installed length * Installed length
55
DWKL PRODUCTS
ACCESSORIES
Pressure Relief Valve ANSI Flange / DWKLØ-PRV Pressure Relive Valve with Rolled Flange / DWKLØ-PRVR
Ø ØA ØB L2 Ø ØA ØB ØC L2
3 6.5 7.5 10.69 3 3 4 6.5 10.69
10 14 16 7.97 10 10 11 14 7.97
4 4 6.5
5 5 7.5
6 6 8.5
7 7 9.5
8 8 10.5
9 9 11.5
10 10 12.5
11 11 13.5
12 12 14.5
13 13 15.5
I.D + 10“
0.025
14 14 16.5
16 16 18.5
18 18 20.5
20 20 22.5
22 22 24.5
24 24 26.5
26 26 28.5
28 28 30.5
30 30 32.5
32 32 34.5
34 34 36.5
36 36 38.5
56
OFFSET TABLES
OFFSET TABLES
DWKLØ-15EL
PART NUMBER DIM - A Ø DIM - B Ø DIM - C DIM - D* DIM - E* DIM - F
DWKL11-15EL
E
DWKL
DWKL18-15EL
F
18 20,5 5,56 6,09 17,9 2,3
DWKLØ-30EL
PART NUMBER DIM - A Ø DIM - B Ø DIM - C DIM - D* DIM - E* DIM - F
DWKL11-30EL
E
11 13,5 4,7 4,01 18,69 5,01
DW
KL1
0-30
EL
* Installed length
57
OFFSET TABLES
OFFSET TABLES
DWKLØ-45EL
PART NUMBER DIM - A Ø DIM - B Ø DIM - C DIM - D* DIM - E* DIM - F
D
W
DWKL11-45EL 11 13,5 7,01 4,98 20,78 8,73
KL
10
-4
5E
L
DWKL12-45EL 12 14,5 7,07 5,36 21,17 8,77
E
DWKL13-45EL 13 15,5 7,35 5,41 21,8 9,07
DWKLØ-90EL
PART NUMBER DIM - A Ø DIM - B Ø DIM - C DIM - D* DIM - E* DIM - F
* Installed length
58
SAMPLE SYSTEMS
59
SAMPLE SYSTEMS
REDUCTION 90 DEGREE
BOOT TEE,
DWKL20-90BT:16
90 DEGREE BOOT TEE,
DWKL20-90BT:16
TEE CAP ACCESS,
DWKL20-TCA ANCHOR PLATE SUPPORT,
DWKL20-APS
60
SAMPLE SYSTEMS
61
SAMPLE SYSTEMS
62
SAMPLE SYSTEMS
63
WARRANTY STATEMENT
WARRANTY
STATEMENT
I. 1-Year Limited Warranty V. Filing of a Limited Warranty Claim
Jeremias Inc. (“Jeremias”) provides a 1-year limited warranty (“1-Year Limited Limited Warranty claims may only be asserted during the term of the
Warranty”) for its Universal Stacks and Exhaust Systems models SWKL applicable Limited Warranty period. Any extension of the term of the
and DWKL (collectively, the “Products”) for any defect in workmanship or Limited Warranties shall be excluded, regardless of the legal basis. If
materials under normal use from the date of shipment to the purchaser of Purchaser believes that there is a justified Limited Warranty claim, Purchaser
Products (“Purchaser”), subject to the following conditions: shall notify Jeremias to that effect in writing. Any claims stemming from
or relating to a Limited Warranty shall be asserted in detail within eight
> Product sizing and specifications have been performed in accordance with weeks after the discovery of the defect (the time when the notification is
generally accepted engineering practices. received by Jeremias will be the basis for determining whether a claim has
been reported within this deadline) or else shall be excluded and not be
> Correct installation and maintenance in full compliance with Jeremias’ recognized by Purchaser. Such notification shall include a description of
installation and maintenance instructions as published at the time of the defect, original proof of purchase, and a copy of the written inspection
installation. report as described in Section II above (if applicable).
Jeremias provides for an extended 25-year limited warranty (“25-Year EXCEPT AS SET FORTH EXPRESSLY THEREIN, JEREMIAS MAKES NO
Limited Warranty”) for any defect in workmanship or materials under normal WARRANTIES, EITHER EXPRESS OR IMPLIED, REGARDING THE PRODUCTS,
use from the date of shipment to the Purchaser, subject to the satisfaction INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
of the following conditions: MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
> Products must have been designed and sized by Jeremias’ personnel.
VII. Damages Disclaimer and Limitation
> Availability of a written inspection report from the time of installation,
or timely thereafter, by a Jeremias inspector or an inspector authorized by IN NO EVENT SHALL JEREMIAS BE LIABLE TO ANY CLIENT OR ANY
Jeremias, that the Product assembly and installation conformed to all of OTHER PERSON FOR ANY (A) INDIRECT, INCIDENTAL, CONSEQUENTIAL
Jeremias’ assembly and installation instructions. OR PUNITIVE DAMAGES, INCLUDING LOSS OF PROFIT OR GOODWILL
OR (B) DIRECT DAMAGES TO BODY, HEALTH OR PROPERTY FOR ANY
> Products were at all times operated and maintained in full compliance with MATTER ARISING OUT OF OR RELATING TO THE PRODUCTS, WHETHER
Jeremias’ operation and maintenance instructions as published at the time SUCH LIABILITY IS ASSERTED ON THE BASIS OF CONTRACT, TORT OR
of installation or as later provided to Purchaser by Jeremias. OTHERWISE EVEN IF JEREMIAS HAS BEEN ADVISED OF THE POSSIBILITY
OF SUCH DAMAGES. IN NO EVENT SHALL JEREMIAS’ TOTAL AGGREGATE
LIABILITY FOR DAMAGES EXCEED THE GREATER OF THE AMOUNT OF
III. Exclusion of Limited Warranty (A) TOTAL COMPENSATION PAID BY PURCHASER TO JEREMIAS FOR
THE PRODUCTS, OR (B) PROCEEDS AVAILABLE FROM ANY INSURANCE
The 1-Year Limited Warranty and the 25-Year Limited Warranty (collectively POLICY IN EFFECT AND APPLICABLE TO THE EVENT GIVING RISE TO
the “Limited Warranty”) shall not cover (i) damages to: SUCH LIABILITY.
IV. Remedies
If a valid Limited Warranty claim arises, Jeremias shall, it its sole discretion,
either repair the Product or deliver a properly functioning Product. This Limited
Warranty is limited to repair or replacement of the Product plus shipping
cost to the location of the defective Product. The Limited Warranty does
not cover labor costs for removal or replacement of the defective Product,
unless such labor shall be carried out by Jeremias itself in its sole discretion.
64
NOTES
65
NOTES
66
NOTES
67
PRODUCTION SITES
SALES OFFICES
SWITZERLAND ITALY
www.jeremias-schweiz.ch www.jeremias.it
EXHAUST SYSTEMS
www.jeremiasinc.com