Professional Documents
Culture Documents
Immense Final Rates-Carpentry
Immense Final Rates-Carpentry
Immense Final Rates-Carpentry
Indore
Providing and fixing 4mm thick fire rated Aluminium composite panel
(Shade: Butler Steel,SP05 I) (Anodized Aluminium skin on top & bottom
plus 3mm thick polyethylene core) cladding of approved shade of required
profile to Brick/ Concrete wall/ MS frame, coping, bends, Circular column
or any type architectural features wherever required as shown in drawing,
either segmental curved or straight in plan wherever specified with
extruded aluminium sections, angle cleats, weather sealants, stainless
steel screws, rivets, fasteners, Galvanized brackets (Galvanizing to be done
7.32 conforming to IS:4759-1996 upto 610 gms. per sqm, 80-90 micron 10
thickness), drilling and fixing the cladding to either masonry/ reinforced
cement concrete/ MS structural frame work including making grooves of
required size applying non staining weather sealant, backer rod, all
necessary accessories, making groves,making of light coves & provision for
light fixtures etc. complete in all respects Note: The contractor shall
submit fabrication drawings for approval of the Project Manager. The
fabrication work shall start only after approval of the fabrication drawings.
Any change required in the fabrication drawings shall be carried out at no
extra cost. (AluDécor, L Strong)
Providing and fixing in position Stainless steel 316 Grade sheet of 2mm
thick at Lift top facia & jams as per detail drawing. Base frame shall be of
Aluminium Frame work of 25 x 50mm Aluminium tube in 18 gauge and
7.3 12mm thick bwp ply . ss sheet shall be machine pressed shall be lined on 19
ply with adhesive including all necessary fixing arrangement. Only front
visible sheet area shall be measured for billing . As per approved make list.
Providing and fixing WPC board (Wood Plastic Composite board) paneling
on Existing Aluminium frame to be hanged with 8 nos. Z- clip, with all
necessary fixing arrangement, square and tapered edges of the boards are
6.62.1 to be jointed and finished so as to have a flush look treated with 226
antitermite and fire retardant paint including grooves etc. complete as per
design and partition detail drawing.3mm thick WPC Board (Including Z-Clip
System)
Providing and fixing WPC board (Wood Plastic Composite board) paneling
on Existing Aluminium frame to be hanged with 8 nos. Z- clip, with all
necessary fixing arrangement, square and tapered edges of the boards are
6.62.2 to be jointed and finished so as to have a flush look treated with 226
antitermite and fire retardant paint including grooves etc. complete as per
design and partition detail drawing.6mm thick WPC Board (Including Z-Clip
System)
Providing and fixing WPC board (Wood Plastic Composite board) paneling
on Existing Aluminium frame to be hanged with 8 nos. Z- clip, with all
necessary fixing arrangement, square and tapered edges of the boards are
6.62.3 to be jointed and finished so as to have a flush look treated with 1581
antitermite and fire retardant paint including grooves etc. complete as per
design and partition detail drawing.12mm thick WPC Board (Including Z-
Clip System)
Providing and fixing WPC board (Wood Plastic Composite board) paneling
on Existing Aluminium frame to be hanged with 8 nos. Z- clip, with all
necessary fixing arrangement, square and tapered edges of the boards are
6.62.4 to be jointed and finished so as to have a flush look treated with 226
antitermite and fire retardant paint including grooves etc. complete as per
design and partition detail drawing.18mm thick WPC Board (Including Z-
Clip System)
Providing & fixing Soft board paneling to consist of 12mm th Soft board
with required frame work with teakwood beading patty or (plywood
6.54 backing as per required groove) grove pattern at wall surfaces, Partition 10
edge as per required & suggested Area. Rate also including for soft board
Fabric laying .
6.56 Providing and fixing 12mm thick bwp. ply on wooden frame. 10
Providing and fixing in position Laminate paneling as per detail drg. Basic
structure shall be made out of adequate M.S frame and wooden frame.
The wooden frame shall be fixed to wall using suitable fixing arrangement
as directed by Architect. ( Treated with fire retardant paint and antitermite
6.57 ), The wooden framework shall be cladded with 12mm thick bwp ply on all 10
sides and finished with 1.0mm thick Laminate shall be lined on it with
6mm x 6mm groove made in wood as detail. The job shall be completed by
French polish and pu coating of appd. colour and shade on it. (Laminate -
608 Walnut Greenlam or 14538 VNR (American Walnut) –Marino )
Providing and fixing Steam beach wooden paneling , coping , jamb, cill
cover etc. of approved size fixed to partition wall fixed with adequate
6.58 Aluminium frame works and all necessary fixing arrangement, PU polishing 1
, wood preservative , termite proof paint, Adhesive, making of molding ,
groove etc. as shown complete as per direction of Engineer- in-charge.
Flush door shutters with Frame Providing & fixing laminated 37mm thk.
Flush door made from water proof Green Ply/ Century make solid BWP
flush door 35mm thk size as per site condition, with 1 mm thick laminate
from both side. & 10mm thk teak wood beading/Architrave on edge & 100
x 75 seasoned teak wood door frame & Shutter. Provide locking system &
Shutter to be fixed using 5 nos heavy duty ball bearing type SS hinges of
Dorma & also provided S S matt finish handle (as per drawing) Door
stopper, door buffer, heavy duty hold back cancelled Door closer of Dorma
with all necessary hardware to be Dorma. also provide 150mm wide SS
304 grade plate at bottom of door on both side, including vision panel as
6.59.1 52
per approved drawing complete as per the design or as directed Engg.-in
charge. 1. Stockholm Lever handle with quick fit connection, narrow stile
rose & escutcheon. Finish: Satin SS, - Article No. 8012140 2. Narrow stile
COMPACT sash lock for profile cylinder in 35mm backset single throw
20mm dead bolt, center to center is 92mm with strike plate, for end size:
24mm x 240mm. - Article No. 8134002 3. 5 pin Euro profile double cylinder
with one side key and one side thumb turn, 70mm length - Article No.
8245212 4. Boxer - Rack and Pinion concealed Door Closer with slide arm
Closing force: 1-4 (adjustable) Tested according to EN 1154 for door width
upto: 1000mm Finish: Silver - Article No. 1210002
Sliding door shutters with Frame Providing & fixing laminated 37mm thk.
sliding door made from water proof Green Ply/ Century make solid BWP
flush door 35mm thk size as per site condition, with 1 mm thick laminate
from both side. & 10mm thk teak wood beading/Architrave on edge & 100
x 75 seasoned teak wood door frame & Shutter. Provide locking system &
6.59.2 3
including sliding track as per detailed drawing ,also provided S S matt finish
(Dorma make ) handle (as per drawing) with all necessary hardware to be
fixed (make Dorma). Also provide 150mm wide SS 304 grade plate at
bottom of door on both side, including vision panel as per approved
drawing complete as per the design or as directed Engg.-in charge.
Providing & fixing in position shaft door made out of 32mm thick Flush
door made from water proof Green Ply/ Century make solid BWP flush
door 35mm thk size as per site condition, with 1 mm thick laminate from
6.6 11
both side. & 10mm thk teak wood beading/Architrave on edge & 100 x 50
seasoned teak wood door frame & Shutter. including dead lock and
magnetic catcher as per the design or as directed Engg.-in charge
Providing & fixing non Reflective 6mm thick lacquered glass paneling
(White Back Painted) over existing WPC board paneling by Alstone silicon
sealant or equivalent of suitable make. complete as per drawing as per
required size as directed by Engg-in-charge with all Necessary hardware &
20.15.2 fittings as per detail. (Approved Make Saint Gobain/Modi/Asahi) Above 115
item also includes providing and fixing anodized aluminium 'U' channel 6
mm wide X 6 mm high with a 4 mm groove fixed vertically between every
panel joint with adhesive flushed evenly with panels GREY LACQUERED
GLASS -(GLG) - Match with Soothing Silver
Providing & fixing non Reflective 6mm thick lacquered glass paneling
(White Back Painted) over existing WPC board paneling by Alstone silicon
sealant or equivalent of suitable make. complete as per drawing as per
required size as directed by Engg-in-charge with all Necessary hardware &
20.15.3 fittings as per detail. (Approved Make Saint Gobain/Modi/Asahi) Above 22
item also includes providing and fixing anodized aluminium 'U' channel 6
mm wide X 6 mm high with a 4 mm groove fixed vertically between every
panel joint with adhesive flushed evenly with panels WHITE LACQUERED
GLASS -(WLG) - White Shade
Item same as above item no. 17.65.1 but for using aluminium frame size
17.65.2 25 x 50mm in 18 gauge work for paneling works instead of partition works 835
as per direction of EIC
Providing, Fixing bevelled edge frameless mirror 6mm thick float glass,
complete with 12mm thick bwp plywood ground fixed to wooden cleats
13.51 57
with C.P. brass screw and washers complete. Mirror flushed with adjacent
stone with SS 304 grade border complete in all respects.
Total
Required U of M ImmenseR Amount Remarks
ates
M^2 (square
8100 153900 B2B
meter)
WPC
M^2 (square
243 54918 provided by
meter)
godrej
WPC
M^2 (square
316.8 71596.8 provided by
meter)
godrej
WPC
M^2 (square
357.3 564891.3 provided by
meter)
godrej
WPC
M^2 (square
385.2 87055.2 provided by
meter) godrej
M^2 (square
1120.5 11205 B2B
meter)
M^2 (square
810 8100 B2B
meter)
M^2 (square
meter) 2160 21600 B2B
M^3 (cubic meter) 99000 99000 B2B
Fulsh door,
Laminate,
M^2 (square
4230 219960 Door
meter) Hardware
provided by
godrej
Fulsh door,
Laminate,
M^2 (square Door
4230 12690
meter) Hardware
provided by
godrej
Fulsh door,
Laminate,
M^2 (square Door
3690 40590
meter) Hardware
provided by
godrej
AHPL
M^2 (square 576 664128 provided by
meter)
godrej
AHPL
M^2 (square
576 442368 provided by
meter)
godrej
M^2 (square
180 1800 B2B
meter)
M^2 (square
198 1980 B2B
meter)
M^2 (square
251.1 2511 B2B
meter)
M^2 (square
251.1 2511 B2B
meter)
Rockwool,
M^2 (square paper
225 284175
meter) provided by
godrej
M^2 (square
9180 55080 B2B
meter)
M^2 (square
7650 38250 B2B
meter)
Lacquered
M^2 (square glass
405 58320
meter) provided by
godrej
Lacquered
M^2 (square glass
405 46575
meter) provided by
godrej
Lacquered
M^2 (square glass
meter) 405 8910 provided by
godrej
Aluminium
M^2 (square sections
337.5 426262.5
meter) provided by
godrej
Aluminium
M^2 (square sections
337.5 281812.5 provided by
meter)
godrej
Mirror
M^2 (square
945 53865 provided by
meter) godrej
4,026,741