Professional Documents
Culture Documents
All Assignments Questions - Control of AC and DC Drives Fall-2020
All Assignments Questions - Control of AC and DC Drives Fall-2020
Statement:
Analyze the four-quadrant operations of any type of DC motor in any real-time practical
application similar to the example of motor operations in the elevator studied during lecture.
Instructions:
• Do not copy assignment from other students. If copied, both will get zero marks. So, solve
yourself.
• Please submit the soft copy of assignment.
• Submission deadline is 25th NOV 2020.
• The late submission will not be accepted.
• Submit your assignment with proper format in word/pdf file that includes the statement, its
method/approach to solve, schematic diagram, parameters of simulations, results, and the
simulation file attached separately etc.
The University of Lahore
Faculty of Electrical Engineering
Control of AC and DC Drives Instructor: Dr. Tanveer Yazdan
Assignment #2: Assigned Date: 2020.11.18, Due date: 2020.12.4
CLO2-C4-PLO2
Statement:
Simulate Speed response to step input voltage of separately excited DC Motor using MATLAB
/Simulink when motor is driving the load with inertia of 8*J, where J is inertia.
Ia_rated=25 A,
J=0.00252 kg-m^2
B= 0 kg-m^2/sec (friction)
Instructions:
• Do not copy assignment from other students. If copied, both will get zero marks. So, solve
yourself.
• Please submit the soft copy of assignment.
• Submission deadline is 4h DEC 2020.
• The late submission will not be accepted.
• Submit your assignment with proper format in word/pdf file that includes the statement, its
method/approach to solve, schematic diagram, parameters of simulations, results, and the
simulation file attached separately etc.
The University of Lahore
Faculty of Electrical Engineering
Control of AC and DC Drives Instructor: Dr. Tanveer Yazdan
Assignment #3: Assigned Date: 2020.12.10, Due date: 2020.12.24
CLO2-C4-PLO2
Statement:
A 460-V, 25-hp, 60-Hz, four-pole, Y-connected wound-rotor induction motor has the following
impedances in ohms per phase referred to the stator circuit
𝑅𝑅𝑠𝑠 = 0.641 𝑜𝑜ℎ𝑚𝑚, 𝑅𝑅𝑟𝑟 = 0.332 𝑜𝑜ℎ𝑚𝑚,
𝑋𝑋𝑙𝑙𝑙𝑙 = 1.106 𝑜𝑜ℎ𝑚𝑚, 𝑋𝑋𝑙𝑙𝑙𝑙 = 0.464 𝑜𝑜ℎ𝑚𝑚, 𝑋𝑋𝑚𝑚 = 26.3 𝑜𝑜ℎ𝑚𝑚
Determine
a) the maximum torque of this motor? At what speed and slip does it occur?
b) the starting torque of this motor?
c) Calculate and plot the torque-speed characteristics of this motor using MATLAB. Assume
the minimum value of slip of s=0.001.
Instructions:
• Do not copy assignment from other students. If copied, both will get zero marks. So, solve
yourself.
• Please submit the soft copy of assignment.
• Submission deadline is 24th DEC 2020.
• The late submission will not be accepted.
• Submit your assignment with proper format in word/pdf file that includes the statement, its
method/approach to solve, schematic diagram, parameters of simulations, results, and the
simulation file attached separately etc.