Professional Documents
Culture Documents
Headlight Sensitivity Adjustment-English Version
Headlight Sensitivity Adjustment-English Version
(光线暗环境下做)
Sensitivity adjustment of headlights (done in dark light)
记忆时亮度为下次感应亮度
The brightness of the memory is the next induced brightness
1、插上钥匙发动汽车,等 10 秒:
1. Insert the key to start the car and wait 10 seconds:
2、大灯开关置于 0 档位置,等 10 秒:
2. The headlight switch is placed in the zero position, etc., for 10 seconds:
3. Then turn 0 / Auto0 / Auto0 in 2 seconds;
4、蓝色调节指示灯(位于开关底部)
4. Blue adjustment indicator (at the bottom of the switch)
闪 6 下,代表成功。
Flash 6, on behalf of success.
小灯灵敏度调节(不限光线)
Sensitivity adjustment of small lamp (unlimited light)
记忆时亮度为下次感应亮度
The brightness of the memory is the next induced brightness
1、插上钥匙发动汽车,等 30 秒:
1. Insert the key to start the car and wait 30 seconds:
2、大灯开关置于 0 档位置,等 10 秒:
2. The headlight switch is placed in the zero position, etc., for 10 seconds:
3、2 秒内转完 0-Auto-0-AUTO -AUTO:
3, 2 seconds to complete the 0-Auto-0-AUTO-AUTO:
4、蓝色调节指示灯(位于开关底部)
4. Blue adjustment indicator (at the bottom of the switch)
5、快闪 10 下,代表成功。
5.Flash 10 times, on behalf of success.
熄火延时时间的设置(光线暗环境下做)
Setting of flameout delay time (done in dark light environment)
【时间:出厂设置为 20 秒】
[time: factory set to 20 seconds]
1、发动汽车,10 秒后,熄火取下钥匙:
1. Start the car, 10 seconds later, turn off the key and take off the key:
2、等待灯光自动关闭:
2. Wait for the lights to turn off automatically:
3、大灯开关置于 0 档位置,等 10 秒
3. The headlamp switch is placed in the zero position, etc., 10 seconds.
4. Then in 2 seconds, I will turn 0 / O / O in 2 seconds.
5、蓝色调节指示灯(位于开关底部)
5. Blue adjustment indicator (at the bottom of the switch)
6、亮了又灭,熄火延时时间设置为 10 秒:
6.Turn on and off, turn off the delay time to 10 seconds:
重复以上操作,炮火延时设置为 0 秒:
Repeat the above operation, and the gun delay is set to 0 seconds:
再重复以上操作,熄火延时设置为 20 秒.
Repeat the above operation, the flameout delay is set to 20 seconds.
开锁亮灯时间的设置(光线暗环境下做)
Setting the time to turn on and off the lights (done in dark light)
【时间:出厂设圣为 30 秒】
[time: set the factory holy for 30 seconds]
1、发动汽车,10 秒后熄大取下匆匙:
1. Start the car and remove the spoonful after 10 seconds:
2、等 2 分钟,按遥控开锁,车灯亮:
2, wait 2 minutes, press remote control to unlock, lights on:
3、等待灯光自动关闭:
3. Wait for the lights to turn off automatically:
4、大灯开关置于 0 档位置,等 10 秒
4. The headlamp switch is placed in the zero position, etc., 10 seconds.
6、蓝色调节指示灯(位于开关底部)
6. Blue adjustment indicator (at the bottom of the switch)
7、亮了又灭,开锁亮灯时间设置为 15 秒:
7.Turn on and off, turn on the lock and turn on the light for 15 seconds:
重复以上操作,开锁亮灯设置为 0 秒:
Repeat the above operation, turn on the lock and turn on the light to 0 seconds:
再重复以止操作,开领亮灯设置为 30 秒。
Repeat to stop the operation, turn on the light set to 30 seconds.
3. L’interrupteur des phares est placé en position zéro, etc., pendant 10 secondes :
3. L’interrupteur des phares est placé en position zéro, etc., pendant 10 secondes :
Réglage de l’heure pour allumer et éteindre les lumières (fait en lumière sombre)
2. Attendez 2 minutes, appuyez sur la télécommande pour déverrouiller, les feux de la voiture sont
allumés :
Répétez l’opération pour arrêter à nouveau l’opération, ouvrez le collier, l’éclairage est réglé sur 30
secondes.
Répétez l’opération pour arrêter l’opération, allumez la lumière réglée sur 30 secondes.