Professional Documents
Culture Documents
Copia de 7083 - 1993 - Inglés - Proporciones y Dimensiones de Los Símbolos para Tolerancias Geométricas Usadas en Dibujos Técnicos
Copia de 7083 - 1993 - Inglés - Proporciones y Dimensiones de Los Símbolos para Tolerancias Geométricas Usadas en Dibujos Técnicos
Copia de 7083 - 1993 - Inglés - Proporciones y Dimensiones de Los Símbolos para Tolerancias Geométricas Usadas en Dibujos Técnicos
National Foreword
This Indian Standard which is identical with IS0 7083-1983 ‘ Technical drawings -
Symbols for geometrical tolerancing - Proportions and dimensions ‘, issued by the International
Organization for Standardization (ISO) was adopted by the Indian Standards Institution on the
recommendation of the Drawings Sectional Committee and approved by the Mechanical Engi-
neering Division Council.
Wherever the words ‘ International Standard ’ appear, referring to this standard, they
should be read as ‘ Indian Standard ‘.
Cross References
Adopted
4 September 1994 @May 1985, ISI Gr 5
I I
The dimensions of the symbols are based on the standard The configurations are depicted on a grid with a spacing equal
heights of lettering given in IS0 3098/l. to the thickness of line. The design of the inscribed characters
is mostly not shown, but shall be the same as in IS0 309811 for
lettering type B, vertical or inclined.
3
IS : 11158-1984 ’
IS0 7083-l 983
3
IS:l1158-1984
IS0 70831983
4
IS c,111584984 x
IS0 7083-1983
6
IS : 11158-1984
IS0 7083-l 983
a) b)
a) b)
a) b)
7
IS : 111581984
IS0 7083-l 983
a
IS : 111554884
IS0 70634553
6 Examples
9
IS : 11158-1984
IS0 7083-l 983
to
Printed at Slmco Prlntlng Pnrs. Oolhl, India
I _.__.”