Professional Documents
Culture Documents
Unit Equipped With The Electrical Distributer - The RTU Unit Has An Input of The Three Phase Line Parameters (V, I)
Unit Equipped With The Electrical Distributer - The RTU Unit Has An Input of The Three Phase Line Parameters (V, I)
The parameters of the RTU unit can be adjusted from the HMI equipped with the unit .
Menus and Submenus :
Example 2 :
Protection setting ranges :
AUTOMATION AND ANCILLARY FUNCTIONS:
For example :
Application menu :
Micom s1 agile software : (test case ) (schneider’s relay )
RTU is connected to pc via Ethernet or COM(front port )communication channels .
We choose Quick connect , then relay model and communication channel with PC and wait until
the communication is initiated .
Or we can use detailed configurations by creating a new system voltage level Bay(unit)
and therefore a device (relay)
Then we extracted the settings and PSL folders of the previously adjusted relay . in order to
perform modifications .
Settings folder includes :::
Parameters like CT,PT ratios and protection details and tripping times ,..etc.
PSL folder :
Overcurrent protection example :::::::::
Secondly over/under voltage protection :
First configurations
Second PLS
The measurements retrieved from the measurements folder can be saved as an excel file .
Using excel we undergo the following :
- Remove address , Group columns .
- Add column named address with a starting address 0.
- Perform function of adding (val+2) with the precedents columns.
- Concatenate each column with MW before each address integer .
- Add column named data_types and autofill it with WORD.
We can write a simple python code with a GUI to perform data analysis .
We can also use python to train, deploy models .
Therefore the dataset is ready to be imported to the plc software program .
Execution is running