STFU!
oPTICAL nOISEGATE
2015 lectric-fx
The Lectric-FX STFU (Shut the funk up!) is a simple optical
noise gate project based on the DOD Bi. The only change to
the ori inal circuit is a level trimmer is added to the output
to sath your bypass signal to the open gate. For best results
the STFU should be placed first in your signal chain.
Vactrol choice:
The original design used the VIL5C2 vactrol, for best opera-
tion we recommend that you use either this or the Hacron
equivalent CHIZ4OCLD-R9
If you wish to experiment with a home-rolled vactrol an LOR
with a 1M+ dark resistance and 10k or less light resistance
will be a good place to start. If the light resistance is too
high unity volume may not be reached with the gate open and if
the dark resistance is too low the gate may nat fully close.
The LDR rise and fall response times will directly relate to
how quickly the gate opens and closes. A diffused yellow or
green LED will likely offer the best results for the LED por-
ion of the vactrol.oPTICAL nOISEGATE sCHEMATICDrill Suggestion
lil
H
IN]
15908