Professional Documents
Culture Documents
Wascomat Specifications Driers WC30 WC285 WC4545 WC50 WC758 WC78 WC120 WC170
Wascomat Specifications Driers WC30 WC285 WC4545 WC50 WC758 WC78 WC120 WC170
Wascomat
Basket Capacity (lb/kg) 30 lbs. (13.6 kg) 30 lbs. (13.6 kg) 2 x 45 lbs. 50 lbs. (23 kg) 75 lbs. (34 kg) 75 lbs. (34 kg) 120 lbs. (54.5 kg) 170 lbs. (77.3 kg)
2 x 20.5 kg
Fits through 36” door only 28 1/2” wide Extra large stack Fits through 36” door Big & economical Fits through 36” door Reversing Standard Reversing Standard
Width (in/mm) 34 1/4” (870mm) 28 1/2” (724mm) 34 5/16” (870mm) 34 1/4” (870mm) 38 1/4” (972mm) 46 3/16” (1173mm) 48 5/8” (1235mm) 55 7/8” (1419mm)
Depth (in/mm) * 36 7/8” (937mm) 41 1/2” (1057mm) 52 1/2” (1323mm) 48 1/2” (1232mm) 47” (1194mm) 34” (864mm) 62 1/2” (1588mm) 62 1/2” (1588mm)
Height (in/mm) 72 ” (1829mm) 68” (1727mm) 81 1/16” (2059mm) 72” (1829mm) 75 1/8” (1908mm) 84 5/16”” (2140mm) 81” (2207mm) 93” (2540mm)
Door opening diam (in/mm) 21 1/2” (546mm) 21 1/2” (546mm) 2 x 27” (686mm) 21 1/2” (546mm) 31 3/8” (797mm) 31 3/8” (797mm) 31 3/8” (797mm) 31 3/8” (797mm)
Airflow gas/electric 60Hz - 460 cfm 60Hz - 375 cfm 60Hz - 600 cfm 60Hz - 750 cfm 60Hz - 1000 cfm 60Hz - 1200 cfm 60Hz - 2150 cfm 60Hz - 3700 cfm
steam 60Hz - 460 cfm N/A N/A 60Hz - 750 cfm 60Hz - 1000 cfm N/A 60Hz - 2150 cfm 60Hz - 4400 cfm
Basket Motor ** 1/2 hp 1/2 hp 3/4 hp (2) 3/4 hp 1 hp 1 hp 3/4 hp 1 hp
Exhaust Connection *** gas 8” (203mm) 6” (152mm) 2 x 8” (2x203mm) 8” (203mm) 8” (203mm) 10” (254mm) 14” (356mm) 18” (457mm)
steam 8” (203mm) option 1 x 10” (1x254) 8” (203mm) 8” (203mm)
electric 8” (203mm) 8” (203mm) 8” (203mm)
GAS MODELS:
Net Weight (lbs/kg) 534 lbs (243kg) 455 lbs (207kg) 1015 lbs (469kg) 651 lbs (295kg) 721 lbs (327kg) 888 lbs (403kg) 1440 lbs (655kg) 2103 lbs (952kg)
Crated Weight(lbs/kg) 571 lbs (260kg) 500 lbs (227kg) 1050 lbs (485kg) 700 lbs (317kg) 773 lbs (351kg) 938 lbs (426kg) 1580 lbs (718kg) 2269 lbs (1031kg)
Heat Input (Btu/hr) 100,000 btu/hr 72,000 btu/hr 2 x 112,000 btu/hr 150,000 btu/hr 175,000 btu/hr 204,000 btu/hr 375,000 btu/hr 550,000 btu/hr
(25,200 kcal/hr) (18,144 kcal/hr) (28,230 kcal/hr) (37,799 kcal/hr) (44,099 kcal/hr) (51,407 kcal/hr) (94,498 kcal/hr) (138,598 kcal/hr)
300,000 btu/hr DR 395,000 btu/hr DR
Inlet pipe connection **** 1/2” MNPT 1/2” NPT 3/4” MNPT 1/2” MNPT 3/4” FNPT 3/4” FNPT 1” FNPT 1 1/2” FNPT
STEAM MODELS: ***** 77” operating height N/A N/A 78” operating height 79” operating height N/A 89” operating height 101” operating height
Net Weight (lbs/kg) 593 lbs (270kg) 683 lbs (310kg) 816 lbs (371kg) 1735 lbs (789kg) 2259 lbs (1026.8kg)
Crated Weight (lbs/kg) 631 lbs (287kg) 733 lbs (333kg) 868 lbs (395kg) 1875 lbs (852kg) 2425 lbs (1102.3kg)
Steam (lbs/hr - kg/hr) 80psi 104 lbs/hr (47.2kg/hr) 142 lbs/hr (64.5kg/hr) 239 lbs/hr (108.6kg/hr) 450 lbs/hr (204.12kg/hr) 725 lbs/hr (329.6kg/hr)
Boiler HP 3.0 Bhp 4.1 Bhp 7 Bhp 13 Bhp 19 Bhp
Steam Inlet 1” FNPT 1” FNPT 1” FNPT 1 1/4” FNPT 1 1/2” FNPT
ELECTRIC MODELS: height 75 1/8” N/A N/A height 75 1/8” height 77 3/8” N/A height 86 7/8” height 103 15/16”
Net Weight (lbs/kg) 534 lbs (242kg) 651 lbs (295kg) 721 lbs (327kg) 1440 lbs (653.17kg) 2103 lbs (953.90kg)
Crated Weight (lbs/kg) 571 lbs (259kg) 700 lbs (317kg) 773 lbs (351kg) 1580 lbs (716.67kg) 2269 lbs (1029kg)
Electric (kW) 20kW / 68,200 btu/hr 20kW / 68,200 btu/hr 30kW / 102,400 btu/hr 72kW / 245,700 btu/hr 126kW
24kW / 81,900 btu/hr 24kW / 81,900 btu/hr 75.6kW / 258,000 btu/hr 429,900 btu/hr
30kW / 102,400 btu/hr
* Add 1 1/8” (2.75 cm) for main door or 1 1/2 (3.81 cm) for optional E-Stop.
** Where applicable, drive motor specifications are for non-reversing models only. Please consult factory for reversing specifications.
*** Exhaust ducting requirements vary with installation conditions. Exhaust connection size should not be used to determine ducting requirements.
**** Size of gas piping to dryer varies with installation conditions. Contact factory for assistance.
***** Air operated steam damper units must be provided with a clean, dry, regulated air supply of 80 psi +/- 10 psi (5.51 bar +/- 0.68)/
DR Derated dryer operates at a lower Btu/hr (kcal/hr) and higher exhaust static pressures. Used in replacement markets or situations where the exhaust length is longer than normal.
Refer installation and servicing to qualified, licensed personnel. Always read installation and operating manuals and consult local codes before installation. Protect machines with properly rated, inverse-time, common-trip,
industrial-type circuit breakers ONLY. Warranty void if not properly installed. Advise when placing order if dryers are for installation at altitudes in excess of 1000 feet above sea level, as this may require a gas-orifice change.
Contact Wascomat for more information and availability of machines for electric services not listed. Specifications subject to change without notice. Wascomat assumes no responsibility for errors or omissions in this information.
# 096166 6.12.08
Built to last and engineered to perfection. Skinny, with a lot of muscle.
Energy saving Wascomat commercial dryers are meticulously designed to meet the heavy demands of your on-premises Narrow doorways and tight floor plan? No problem! Wascomat has
laundry operation. Precision-engineered for efficiency, ease of use, and superior drying results, you will appreciate the fast dryers starting at 28 1/2” wide. We even have a powerful, gas-saving
drying and user-friendly controls. You’ll also notice less wear and tear on your linens, uniforms, and other processed laundry. 75 lb. dryer that will fit through a standard 36” door.
Wascomat is your best choice for maximizing production and minimizing costs.
Features WC4545
• 45 lb. capacity each pocket
• Sensor Activated Fire Extinguishing System • 34 5/16” wide — fits through 36” door
(SAFE) eliminates the risk of fires caused by • Available in gas heat, 120/60/1
spontaneous combustion. • Extra large doors (27”) with gasketless
windows
• Fast drying and low energy consumption.
• Large, easy-to-access lint drawers
• Extra large doors with gasketless windows.
• Bearings on drive system and motor are
• Bearings on the drive system and motor permanently lubricated