Professional Documents
Culture Documents
Multislice CT Made Simple: Philips MX 4000 Dual
Multislice CT Made Simple: Philips MX 4000 Dual
2
Multislice RSVP
• Early detection of
double Resolution small lesions
same Speed
same Volume
same Power
R • Eliminates need for
coronal scans
• Improves sagital and
coronal reformation
10mm collimation 2 x 5mm collimation
same Resolution
same Speed
double Volume
same Power
V • Trauma triage
• New applications:
Vascular run-off
3
Patient Handling and Setup
4
Table Accessories • Multi-protocol with timing allows the user to easily
From extra padding to optimal support, our table and precisely program acquisitions of varying slice
accessories prevent fatigue and discomfort and give thickness, breathing or scan delay pauses, and table
both patients and technologists a sense of security. speeds. Efficient planning of any exam, complex or
routine, decreases exam times, increasing throughput
and patient satisfaction.
Standard Accessories
Surview Plan
Planning via interactive mouse control of multiple, inde-
pendent acquisition series of any type on the Surview
image.
Knee Rest Patient Pads Viewing angles: 90°, 180°
Longitudinal speed: 100mm/sec
Scan length: 100mm, 300mm,
500mm, 1000mm
Scan width: 500mm
Automatic Scan
Head Holder Table Pad (Not shown) Enables automatic execution of pre-planned studies,
with concurrent, on-line or off-line reconstruction,
Easy Patient Setup background image archiving to local or remote storage
The MX 4000 Dual system has its own set of devices without operator intervention.
innovative features for departmental efficiency,
using scan planning and easy protocol development. DICOM® Modality Worklist*
Provides HIS/RIS interface through DICOM modality
Scan Planning worklist service class; enhances clinical workflow by
Registration of patient information and clinical importing patient demographics and study information
procedure selection, using anatomic graphical from an information management system.
display and sample images.
User Interface
Expert Protocol Planning The entire MX user interface is available in either
Flexible selection of protocol parameters for English or Chinese. Patient name and demographics may
optimized scanning. Allows users to tailor be entered in English, Chinese or with any characters
protocols to their specific needs. included in Latin I.
5
*optional
Scan and Image Acquisition
6
*optional based upon configuration
Dose Management
7
Reconstruction and Display
8
*optional based upon configuration
Post-Processing and Communication
9
Analysis Tools
Included
10
Optional
11
Effective Data Management
Filming
This function allows the user to set up and store filming
parameters. Pre-stored protocols can be set to include
auto-filming, multiformat that saves film.The operator
can film immediately after each image, at the end of a
series, or film after the end of a study and review
images prior to print.The operator can also automati-
cally film the study at three different windows and
incorporate Combine Images functionality to manage
large datasets. Basic monochrome and color DICOM
print capability are supported.
12
*optional based upon configuration
Site Planning MX 4000
Contact the Philips Site Planning department for specific Environmental Requirements
requirements pertaining to optional imaging/viewing equipment floor Temperature:
space and electrical, mechanical, structural or environmental specifi- Gantry room: 20° to 24° C (68° to 75° F)
cations. Control room: 18° to 28° C (64° to 82° F)
Storage/Transport: -20° to +50° C (-4 ° F to 122° F)
Power Requirements MX 4000
• 380 VAC, 50/60 Hz, 38 kVA max. to CT scanner Humidity:
• 200/208/220/230/240/380/400/415/440/460/480 VAC Gantry/Room: 30% to 60% non-condensing
with line match transformer Storage/Transport: 10% to 90% non-condensing
• 3-phase distribution source
Minimum Ceiling Height:
Console Uninterrupted Power Supply (UPS)* 230cm (90.6”)
Provides up to 10 minutes of backup power for host
computer, reconstruction, and monitor.
gantry 1700 kg (3740 lb) 189cm (75˝) 221cm (87˝) 85cm (34˝)
patient table 400 kg (880 lb) 64cm (25˝) 244cm (96˝) 57.5cm (23˝)
console table/CPU 102 kg (224 lb) 75.5cm (30˝) 144cm (55˝) 70cm (28˝)
13
Philips: Partnering with You
14
15
Philips Medical Systems is part of
Royal Philips Electronics
Interested?
Would you like to know more about our imaginative
products? Please do not hesitate to contact us.We would
be glad to hear from you.
On the web
www.medical.philips.com
Via email
medical@philips.com
By fax
+31 40 27 64 887
By mail
Philips Medical Systems
Global Information Center
P.O. Box 1286
5602 BG Eindhoven
The Netherlands
By phone
Asia
Tel: +852 2821 5888
Latin America
Tel: +55 11 2125 0764
North America
Tel: +1 800 299 6417
Philips Medical Systems Nederland B.V. reserves the right to make changes in specifications and/or to discontinue any product at any time without notice
or obligation and will not be liable for any consequences resulting from the use of this publication.