Professional Documents
Culture Documents
Class1 Gauges Brochure
Class1 Gauges Brochure
Class1 Gauges Brochure
Our goal is to assist you in ordering the correct gauge the first time and every time. Class1 Interlube filled pressure gauges with our patented Sub-Z II freeze-proof isolator are a must for all fire
apparatus. Because the stem and bourdon tube are filled and sealed with a low temperature liquid, water
By following the guidelines below we can quickly and easily find the part number required.
cannot enter the tube. This prevents freezing and subsequent damage to the gauge.
1. Determine the size requirement according to the diagrams below. The fill fluid in the case dampens pulsations and vibration while eliminating the need for snubber valves. In
addition, Interlube fill eliminates fogged lenses, rust and corrosion.
2. Determine the pressure range and unit of measure required.
3. Determine the dial color — standard white (some gauges optional black). The demands of fire fighting professionals for accurate and reliable instrument readings have been met by
thousands of Class1 freeze proof pressure gauges that are now in service and meet or exceed NFPA and
4. Do you need a liquid filled or liquid filled illuminated gauge?
ANSI standards.
2.5” Gauge
OD 3.2”
Dial 2.5”
4.5” Gauge
OD 5.25”
Dial 4.5”
Case Dial
• 2.5”, 3.5”, and 4.5” gauge - Zytel nylon • White with black markings as standard
3.5” Gauge
• 6” gauge - aluminum • Black dial with white markings also available
OD 4.125”
Dial 3.5” Bezel Temperature Compensation
• Standard chrome plated or optional colors • Internal breathing diaphragm
(2.5” only)
Accuracy
Lens • 2.5” gauge +/- 2% mid-scale; +/-3% balance,
• High impact resistant acrylic ANSI B40.1, Grade B
Socket • 3.5”, 4.5” and 6” gauge +/-1% of full scale,
• Brass, equipped with Sub-Z freeze proof protection ANSI B40.1, Grade 1A
Bourdon Tube Mounting
• Phosphor bronze, filled with low temperature • Panel mount with adhesive gasket and spin-on ring
liquid • Three front screws for 6” gauges
Connections Pressure Ranges Available
• 1/4” NPT brass male connection • Dual scale with KP or Bar available in limited
ranges
Case Fill Fluid
• Interlube • (See gauge list for standard pressure ranges.)
2 3
PRESSURE GAUGES DUPLEX GAUGES & BEZELS
4 5
QC TEST KIT
The kit includes Class1 pressure and vacuum gauges, flexible high pressure hoses with fittings and a carrying
case. To certify accuracy, the gauges are shipped with a certificate of calibration at 1%, 300# gauge with 2#
increments (recommended for NFPA pump tests).
Specifications
• Gauges: One 0-30” vacuum and one 0-300 PSI gauge
(in 2 PSI increments) 0-400 gauge also available
• Dial: 3.5” white with black markings
• Accuracy: +/- 1% of full scale, ANSI B40.1, Grade 1A
• Case Fill Fluid: Interlube
• Mounting Plate: Black anodized aluminum 0.125” thick
• Hoses: Two - 36” each 2.5” GAUGE 3.5” GAUGE 4.5” GAUGE
• Hose connections: 1/4” NPT male A 3.14” (79.8 mm) 4.14” (105.2 mm) 5.19” (131.8 mm)
• Carrying Case: ABS plastic, 15.5” x 11” x 4.5” B 2.63” (66.8 mm) 3.65” (92.7 mm) 4.71” (119.6 mm)
C 2.69” (68.3 mm) 3.71” (94.2 mm) 4.77” (121.2 mm)
D 3.07” (78.0 mm) 4.32” (109.7 mm) 5.55” (1410 mm)
PART NUMBER DESCRIPTION E 1.75” (44.5 mm) 3.00 (79.2 mm) 4.00 (101.6 mm)
Our body design will also work if you need to replace an existing Class1 2.5" 0-300-PSI WHITE 91525875 X X X
gauge. The hole cut outs are the standard Class1 sizes. 2.5" 0-400-PSI WHITE 91523971 X X X
2.5" 0-400-PSI-WOB BLACK 91523970 X N/A N/A
2.5" 30-0-400-PSI WHITE 91523932 X X X
6” Pressure Gauge 2.5" 30-0-400-PSI-WOB BLACK 91523936 X N/A N/A
2.5" 0-600-PSI WHITE 91523934 X X X
2.5" 0-600-PSI-WOB BLACK 91523938 X N/A N/A
2.5" 30-0-600-PSI WHITE 91523933 X X X
2.5" 30-0-600-PSI-WOB BLACK 91523937 X N/A N/A
2.5" 0-400-PSI/KPA WHITE 91525862 X X X
2.5" 30-0-400-PSI/KPA WHITE 91529546 X X X
2.5" 0-600-PSI/KPA WHITE 91525931 X X X
2.5" 30-0-600-PSI/KPA WHITE 91525974 X X X