Professional Documents
Culture Documents
Adjust Centering Plates Before
Adjust Centering Plates Before
NOTE:
3. Install M8 x 30 cap screws in tab at the rear of both yokes of control levers to secure levers in an upright position.
4.
TX1067424A-UN: Steering Lever Adjustment—Centering
LEGEND:
5. Adjust left link rod to align left lever casting (4) with left link rod pivot bearing (5).
8. IMPORTANT:
The control lever stops must be adjusted properly to prevent damage to the linkage and hydrostatic
components.
TF44157,0000E48-19-20091113
file:///C:/ProgramData/Service%20ADVISOR/Temp/TM11398_09001faa80f6272b.ht... 22/01/2020