Professional Documents
Culture Documents
Daniel Series 1200 Liquid Turbine Flow Meter
Daniel Series 1200 Liquid Turbine Flow Meter
DAN-LIQ-DS-1200-0609
June 2009 Liquid Turbine Flow Meters
www.daniel.com
Product Datasheet
DAN-LIQ-DS-1200-0609
June 2009
The Daniel Series 1200 Liquid Turbine Flow Meter is a Features and Benefits:
volumetric flow metering and transmitting device, used Output linear with flow rate
extensively in the petroleum industry for the accurate
measurement of liquid hydrocarbons. The meter's simple Rangeability of 10 to 1
configuration assures high flow rates, extended flow range
Horizontal or vertical installation
and sustained accuracy, with superior repeatability and
unmatched reliability. Available in 1 to 4 inch sizes
The primary reason for this superior performance with light Superior accuracy and repeatability
hydrocarbons is the Series 1200 lightweight rotor. This
High frequency pulse resolution
rotor is free spinning on flow-through bearings, which
have a self cleaning design. Uniform pulse signal output
The Series 1200 Turbine Flow Meter is versatile and Universal Mounting Box (UMB) housing dual
operates in both horizontal and vertical installations. channel preamplifier and 2 pick-offs
It features an expanding hanger to center the internal
assembly in the body. All turbine meter installations Improved serviceability allows easy access to pick-offs
and reduces installation costs
should incorporate a method for flow conditioning by
using either a standard upstream and downstream section Simple, easy to maintain, field mountable pick-offs
(per API chapter 5, section 3) or a flow conditioning require no interruption of conduit lines
plate. Series 1200 turbine meters have an integral flow
conditioning plate as a standard feature for sizes 1.5 inch Explosion proof / weather proof housing
and larger. OIML Approval (3 to 4 inch) 1.32 - 01060311
This meter is designed for use within the guidelines of Optional Teflon coated rotors for reduced buildup coating
API Standards, Chapter 5.3, (Measurement of Liquid
Hydrocarbon by Turbine Meter) and the test procedures of Integral Flow Conditioner
API, Chapter 4 (Proving Systems).
Page
Product Datasheet
DAN-LIQ-DS-1200-0609
June 2009
Specifications:
Please consult Daniel if your requirements are outside the specifications noted below. Improved performance, premium linearity and
other product and material offerings may be available depending on the application. For world area locations and contact information,
refer to the back page of the data sheet.
CHA. B OUTPUT
COMMON
COMMON
BLACK OR
WHITE RED
1 2
1 2
PICKOFF PICKOFF
BLACK OR WHITE
TB2 TB3
RED
CHANNEL A CHANNEL B
Preamp Jumper
PREAMP JUMPER Configurations
CONFIGURATIONS
Jumper A JUMPER POSITIONSB Out
J3 J4
JUMPER
J1 - Chan. A Input A N/A B40mV. PP Min OUT N/A
J1-CHAN. A INPUT N/A 40mV. PP MIN N/A
J1 - Chan. B Input N/A 40mV. PP Min N/A
J1-CHAN. B INPUT N/A 40mV. PP MIN N/A
J1 J2 J3 - Chan. A Output 5v.Pulse
J3-CHAN. A OUTPUT 5V.PULSE SUP. VOLT. PULSEPulse
Sup. Volt. (10-30 (10
VDC)- 30 VDC)
O.C. O.C.
J4-CHAN.
J4 - Chan.BBOUTPUT
Output 5V.PULSE
5v.Pulse SUP. VOLT. PULSEPulse
Sup. Volt. (10-30 (10
VDC) O.C.
- 30 VDC) O.C.
Page
Product Datasheet
DAN-LIQ-DS-1200-0609
June 2009
Daniel Series 1200 Liquid Turbine Flow Meter and Flow Straightening Sections
®
Size A B C D E F G
(Inches) Inches mm Inches mm Inches mm Inches mm Inches mm Inches mm Inches mm
1 8 203 4 101.6 6.75 171.5 5 127 5 127 18 457 5 127
1.5 9 229 4.5 114.3 7 178 7.5 190 7.5 190 24 610 5.75 146
2 9 229 4.5 114.3 7.25 184 10 254 10 254 29 737 6 152
3 10 254 3 7/8 98 7.75 197 15 381 15 381 40 1,015 6.5 165
4 12 305 4.5 114 8.25 209 20 508 20 508 52 1,320 7 178
Page
Product Datasheet
DAN-LIQ-DS-1200-0609
June 2009
DANIEL SERIES 1200 LIQUID TURBINE FLOw METER: MODEL SELECTION MATRIX
®
Page
Product Datasheet
DAN-LIQ-DS-1200-0609
June 2009
UMB Cover
Dual Channel
Pre-amplifer
Pickoffs
UMB Housing
O-ring
Outlet
Diffuser
Cap
Shaft
Hanger Sleeve
Blades
Flow Conditioning Plate
Rotor
Thrust Assembly
Washer with
Bearing
Hanger
Page Hub
Product Datasheet
DAN-LIQ-DS-1200-0609
June 2009
Emerson Process Management Daniel Measurement and Control, Inc. ("Daniel") is a wholly owned subsidiary
Daniel Measurement and Control, Inc. of Emerson Electric Co., and a division of Emerson Process Management. The
Daniel name and logo are registered trademarks of Daniel Industries, Inc. The
World Area Headquarters Emerson logo is a registered trademark and service mark of Emerson Electric
Houston, Texas, USA Co. All other trademarks are the property of their respective companies. The
T: 713-467-6000, F: 713-827-3880 contents of this publication are presented for informational purposes only, and
USA Toll Free 1-888-FLOW-001 while every effort has been made to ensure their accuracy, they are not to
www.daniel.com be construed as warranties or guarantees, express or implied, regarding the
products or services described herein or their use or applicability. All sales are
Canada: Calgary, Alberta governed by Daniels' terms and conditions which are available upon request.
T: 403.279.1879, F: 403.236.1337 We reserve the right to modify or improve the designs or specifications of such
products at any time. Daniel does not assume responsibility for the selection,
Asia Pacific: Singapore use or maintenance of any product. Responsibility for proper selection, use
T: +65.6777.8211, F: +65.6770.8001 and maintenance of any Daniel product remains solely with the purchaser and
end-user. The Daniel Series 1200 Liquid Turbine Flow Meter is protected by
Europe: Stirling, Scotland U.S. and international patents and patents pending.
T: +44 1786 433400, F: +44 1786 433401
2009 Daniel Measurement and Control, Inc. All Rights Reserved. Unauthorized duplication in whole or in part is prohibited. Printed in the USA.
DAN-LIQ-DS-1200-0609