Professional Documents
Culture Documents
No Judul Paper Link paper/DOI Penulis Penerbit Dan Tahun Penerbit
No Judul Paper Link paper/DOI Penulis Penerbit Dan Tahun Penerbit
Numerical and
experimental analysis of
the tilt angle’s effects on
Abdulmunem R.
1 the characteristics of the https://doi.org/10.1016/j.renene.2021.04.014
Science Direct , 2021
Abdulmunem
melting process of PCM-
based as PV cell’s
backside heat sink
Comparison of prediction
Ali H.A. Al-Waelia, K.
methods of PV/T
Sopiana, Hussein A.
nanofluid and nano-PCM
Kazemb, Jabar H.
system using a measured https://doi.org/10.1016/j.solener.2018.01.026
3 Science Direct, 2018 Yousifb, Miqdam T.
dataset and artificial
Chaichanc, Adnan
neural network
Ibrahima, Sohif Mata,
https://doi.org/10.1016/j.r
Mohd Hafidz Ruslan
enene.2021.04.014
Terindex Jenis Paper
Nama Jurnal Abstrak
Scopus? (riset/review)
Changes in the tilt angle technically affect the amount of solar radiation reaching
the surface of panels. Specific to PV/PCM system, where PCM is employed as
passive cooling methods for the PV cells, these changes could affect the melting
performance of the PCM and subsequently the overall performance of the PV
cells. This novel study presents a numerical and experimental analysis to access
the effect of tilt angle on the characteristics of the melting process of PCM-based
as heat sink inside the PV cells backside rectangular container and its potential
used for thermal management of the PV cells. While numerous literature on the
Renewable
Ya numerical modeling of this system focused their attention on the vertical angle, Paper riset
Energy four different tilt angles (0_x0001_, 30_x0001_, 60_x0001_, and 90_x0001_) are
considered in this study. Excellent agreement was seen between the results
obtained from experiments and numerical simulations. The results show that as
the tilt-angle of PV/PCM system increases from 0_x0001_ to 90_x0001_, the
melting process time of PCM decreases which leads to decrease in overall PV
cell temperature from 0.4% to 12%. In conclusion, PCM shows minimal cooling
performance at a lower tilt angle due to the role of natural convection heat
transfer inside PCM container which acts as a passive cooling mechanism.
Efek penggunaan The above results established that nano-PCM comprising paraffin wax with
nao partikel dan 1.0 vol% of CuO nanoparticles is a viable agent for managing the
experiment temperature of a solar photovoltaic panel at low temperatures, and thereby
PVM terhadap - improving the performance of the PV panel. In future, the work can further
al study
temperatur dan be expanded to examine the performance of the PV panels in different
kinerja panel surya climatic conditions with the help of nano-PCMs.