Professional Documents
Culture Documents
Ligar6wor iNDA: Ingimirs Limited
Ligar6wor iNDA: Ingimirs Limited
E d0 Dia. Hole E
13mm0 Hole for Spacer Welded lifting
plate
Welded
lifting plate
NOTES:
1. Both surfaces shall have a resultant surface finish of 125pin to 250pin average
roughness with either a concentric or spiral serrated finish.
2. Dimensions are for flanges to ASME B 16.47B (erstwhile API 605) for sizes 26" to 60".
3. Diameter, rating & material specification shall be marked on welded fixed plate.
Material as per line class.
4. Thickness 'A' is based on ASTM A285 Gr.0 with corrosion allowance of 1.5mm on each face.
5. Welding and heat treatment requirements shall be in accordance with ASME 831.3
6. Alignment Guide shall be welded in the middle of thickness of Spacer & Blind.
7. All dimensions are in mm unless otherwise specified.
NOTES:
REFER PAGE 1 OF 3 FOR NOTES.
E dO Dia. Hole E
13mm0 Hole for Spacer Welded lifting
only plate
Welded F
lifting plate
0 CO
••
NOTES:
REFER PAGE 1 OF 3 FOR NOTES.